Characterization of phospho-olivines as materials for Li-ion cell cathodes

Solid State Reaction was employed to prepare phospho-olivines LiMPO₄ (where M=Fe, Co) as pure phase and LiNiPO₄ in presence of foreign phases, as cathodic materials for lithiumions batteries. The relationship between structural, morphological and electrochemical properties were investigated in the case of LiFePO₄. Structural investigation has been carried out by means of X-ray powder diffraction (XRPD) and Rietveld refinement. The influence on the morphology of annealing temperature, different flowing gas mixture and addition of ascorbic acid during the synthesis, has been analysed via scanning electron microscopy. The electrochemical cycling performances on LiFePO₄ showed to be positively affected by the modifications of the experimental conditions. Cyclic voltammetry showed a good reversibility during insertion-extraction mechanism, in particular in presence of additives. LiCoPO₄ and LiNiPO₄ are interesting as high voltage cathode materials for Li-ion batteries and have been taken into account, but their electrochemical operating conditions are still to be optimised. In the case of LiNiPO₄ it is very difficult to obtain, by solid state synthesis, suitable purity powders, having a grain size small enough to exploit it usefully as cathodic material for Li-ion cells. Paper presented at the 8th EuroConference on Ionics, Carvoeiro, Algarve, Portugal, Sept. 16 – 22, 2000.     

Complex dynamics of a simple distributed self-oscillatory model system with delay

A simple model for a distributed self-oscillatory system with cubic nonlinearity and delay is presented. Conditions for oscillation self-excitation and stationary oscillation conditions, as well as the stability of the oscillations, are analyzed. Nonstationary self-modulation regimes (including conditions of complex dynamics and chaos) are simulated numerically over a wide range of control parameters. As the factor of nonequilibrium grows, regular and chaotic regimes alternate in a complex manner. The transitions to chaos may follow all scenarios known for finite-dimensional systems. The model suggested is somewhat akin to a number of earlier finite-dimensional models aimed at studying mode competition in resonance electron masers.     

Numerical simulation and experimental validation of heat transfer within rotating flows for three‐dimensional non‐axisymmetric,turbulent conditions

A control volume type numerical methodology for the analysis of steady three‐dimensional rotating flows with heat transfer, in both laminar and turbulent conditions, is implemented and experimentally tested. Non‐axisymmetric momentum and heat transfer phenomena are allowed for. Turbulent transport is alternatively represented through three existing versions of the k–ε model that were adjusted to take into account the turbulence anisotropy promoted by rotation, streamline curvature and thermal buoyancy. Their relative performance is evaluated by comparison of calculated local and global heat balances with those obtained through measurements in a laboratory device. A modified version of the Lam and Bremhorst, low Reynolds number model is seen to give the best results. A preliminary analysis focused on the flow structure and the transfer of heat is reported. Copyright © 2002 John Wiley & Sons, Ltd.     

Growth of K(DxH1 − x )2PO4 single crystals from solutions in the K2O-P2O5-(D, H)2O system

Based on the analysis of the K₂O-P₂O₅-D₂O solubility phase diagram, the optimum conditions of KD₂PO₄ crystallization—the compositions of mother solutions and the temperature range of crystallization—in the KH₂PO₄-D₂O system have been determined. The technique of K(D_xH_{1 ? x} )₂PO₄ growth is developed. The DKDP single crystals with deuterium concentration up to 88 wt % are grown on DKDP seeds from KH₂PO₄ solutions in D₂O by the method of temperature decrease.     

Assigning patients to nurses in neonatal intensive care

An intensive care nursery provides health care for critically ill newborn infants. During a typical shift, infants range from those needing only occasional care to those requiring constant attention. At the beginning of each shift, the head nurse groups the patients for assignment to staff nurses. Typically each nurse cares for one group of infants throughout the shift. The large variation in infant conditions along with several complicating side constraints makes it difficult to develop balanced nurse work loads. We develop a mathematical programming approach for achieving better workload balance. We first develop a detailed neonatal acuity system that quantifies the nursing workload of each patient. We then develop an integer linear program that assigns patients to nurses while balancing nurse workloads. Because this model is computationally intractable, we develop a heuristic that exploits the fact that most nurseries are divided into a number of physical zones. We use ten case studies taken from a major university hospital to benchmark the performance of this heuristic. We also perform a designed experiment using randomly generated problems that examines the effect of nursery parameters on heuristic performance.     

Fleet configuration subject to stochastic demand: an application in the distribution of liquefied petroleum gas

We study the problem of configuring a fleet, in which vehicles receive information on-line about the demand that they should fulfil while they are on the road. In each district it must be decided the number of vehicles and their capacity. The objective function is to minimise the operational cost subject to constraints for the minimum delivery capacity, the maximum vehicle size and the average waiting time for customers. The last constraint is modelled as a queuing system that is adjusted according to the simulation of the delivery process of a Chilean company that distributes liquefied petroleum gas in portable cylinders. We provide the analytical form of all the components of the model, so it can be solved using a standard non-linear programming package. We show that the fleet may increase its sales by 3% and reduce the waiting time of customers 10% by allowing a set of vehicles to share the buffer of orders rather than having vehicles to exclusively serve smaller sectors.     

The role of water vapour on the oxidation of two Ln-Si-Al-O-N glasses (Ln=Y, La)

The oxidation behaviour of LnSiAlON (Ln=Y, La) glasses was studied at different temperatures (990-1150 °C) and under different water vapour pressures (360-2690 Pa). These results were also compared with those obtained under O₂, N₂/H₂O or O₂/H₂O mixtures. When glasses are treated under a N₂/H₂O mixture, optical and SEM observations show porous scales. Transformations of the reaction rate data and a kinetic model show that there is only one limiting process occurring during oxidation. This rate limiting step is the progress of the chemical reaction at the internal interface. Determination of the pressure law dependence and thermodynamics calculations of water vapour molecules dissociation at the investigated temperatures allow us to suggest that the mechanism of oxidation corresponds to decomposition of water molecules on the oxynitride glass surface.     

Disintegration of a drop in an external electrostatic field

Regular features of the disintegration of both a drop of a perfectly conducting liquid and a drop of a dielectric liquid into two or three parts in an external uniform electric field are studied using the principle of minimizing the potential energy of the final state of a closed system with spontaneous processes.     

Mode-locking dynamics of a laser coupled to an empty external cavity

The effect of incorporating an empty external cavity into the feedback loop of a mode-locked laser is investigated. Particular attention is paid to the response of the mode-locking as the external cavity is detuned by a fraction of a wavelength from the round trip transit time associated with the laser. The results for two regimes of operation are presented. In the first case a series of short lived transients develop whereas the other case leads to a persistent intermittent Q-switching scenario, where mode-locking fails. The role of coupling between the cavities and the laser's memory time in relation to the results is discussed. A mechanism for the improved mode-locking observed with non-linear external cavities is suggested.