Synthesis of 1,2-dihydroindolo [1,7-AB] [1,5] benzodiazepines and related structures. A new heterocyclic ring system

The synthesis of the novel 1,2-dihydroindolo [1,7-ab][1,5]benzodiazepine ring system 4 is described. Condensation of 2-fluoronitrobenzene with indoline provided the starting material for the synthesis, 1-(2-nitrophenyl)indoline (1a) in high yield. The nitro group was reduced catalytically and the resulting amino function was acylated to afford the heterocycle percursor amide 3. Refluxing this amide in phosphorus oxychloride brought about a Bischler-Napieralski type cyclodehydration to form the target 1,2-dihydroindolo[1,7-ab][1,5]benzodiazepine ring system. Dehydrogenation of the latter led to the fully aromatic indolo[1,7-ab][1,5]benzodiazepine structure 5, while reduction with sodium borohydride provided the 1,2,6,7-tetrahydroindolo[1,7-ab]-[1,5]benzodiazepine tetracycle 6.     

Liquid–solid disk extraction followed by supercritical fluid elution and gas chromatography of phenols from water

A method combining the techniques of liquid – solid disk extraction (LSDE) and supercritical fluid elution (SFE) has been developed for the phenols regulated by the Clean Water Act. LSDE uses a disk or membrane made of polytetrafluoroethylene (PTFE) fibrils impregnated with small particles, e.g. styrene divinylbenzene (SDB) resin, to extract phenols from water. After disk extraction the retained analytes are eluted from the disk using SFE. SFE is used as an alternative to liquid solvent elution with an organic solvent. Analytes are separated, identified, and quantified using gas chromatography – ion trap detector mass spectrometry (GC-ITDMS). The method is capable of sub parts per billion detection limits, and precision of 5–28% RSD. Evaluation of various disks or membranes, such as C₁₈-silica disks, SDB disks, and ion exchange membranes, has also been performed for the extraction of phenols from water. The results obtained from the in-situ aqueous acetylation of phenols and extraction of their acetates are quantitative. The utilization of LSDE and SFE techniques has proven to be a more effective approach than liquid – liquid extraction in minimizing air pollution and solvent waste.     

High ionization potential conjugated polymers

We report the synthesis of a series of poly(p-phenylene ethynylene)s (PPEs) with high ionization potentials and associated high excited-state electron affinities. Their photophysical properties were investigated using steady-state and time-resolved fluorescence techniques. The ionization potentials of the polymer thin films were determined using ultraviolet photoelectron spectroscopy (UPS), and those with the highest ionization potentials displayed high sensitivity for the detection of electron-donating aromatic compounds. The effects of sterics, chemical structure, and electronic properties on the polymers' sensory responses were investigated by fluorescence quenching experiments in both solution and solid thin films. In addition, we report that in some cases the excited-state charge-transfer complexes (exciplexes) of the PPEs with analytes were observed. These latter effects provide promising opportunities for the formation of sensitive and selective chemical sensors.     

Diode or tunnel-diode characteristics? Resolving the catalytic consequences of proton coupled electron transfer in a multi-centered oxidoreductase

Protein film voltammetry has been employed to define multiple catalytic consequences of proton coupled electron transfer (PCET) in a cytochrome c nitrite reductase. Current-potential profiles reflecting the steady-state rate of nitrite-limited reduction have been defined from pH 4 to 8. Lowering the electrode potential at pH 8 causes the catalytic current to increase and then decrease before it takes a value independent of any further lowering of electrode potential. By comparison, at pH 4, catalysis is initiated at more positive electrode potentials in an approximately sigmoidal fashion with no attenuation of the catalytic rate evident at more negative electrode potentials. The results show that activity is turned on by the coupled transfer of two electrons and one proton to the enzyme. The decreased rate of catalysis at lower electrode potentials under more alkaline conditions shows that this rate attenuation occurs only when reduction is not coupled to compensating protonation(s) of the enzyme. Sites within the enzyme whose reduction and/or protonation may contribute to the definition of these activities are discussed.     

A convenient synthesis of the thieno[3,2-c]pyridine nucleus

The unsubstituted thieno[3,2-c]pyridine ring system was prepared from thiophene-3-carboxaldehyde in 4 steps. The sequence is suitable for scale-up.     

Solid-phase synthesis of imidazo[4,5-b]pyridin-2-ones and related urea derivatives by cyclative cleavage of a carbamate linkage

A solid-phase synthesis of substituted cyclic urea derivatives as potential heterocyclic library scaffolds is described. 2-Amino-3-nitropyridine is attached to Wang resin via a carbamate linkage. Reduction of the nitro group was achieved with SnCl(2).2H(2)O. Reductive alkylation with a range of substituted benzaldehydes followed by cyclative cleavage afforded a small library of 3-substituted imidazo[4,5-b]pyridine-2-ones in 33-45% yield and 59-88% purity. Subsequently, this methodology was applied to the synthesis of 3-substituted imidazo[4,5-f]quinolin-2-ones.     

Bioelectronics and biometallocatalysis for production of fuels and chemicals by photosynthetic water splitting

Applied Biochemistry and Biotechnology - By inserting metallocatalysts (such as platinum, osmium, or ruthenium) at the reducing site of photosystem I (PSI), electrons that emerge from PSI can be...     

Evaluation of an Economical Sunlamp that Emits a Near Solar UV Power Spectrum for Conducting Photoimmunological and Sunscreen Immune Protection Studies

Expense and inconvenience have restricted the use of the filtered xenon are lamp (solar simulator) as a UV source for conducting large-scale animal studies. Because sunscreen immunoprotective levels are significantly affected by the UV power spectrum of the source it is imperative that a solar simulating source be used for accurate measurements of sunscreen protection levels that are relevant to human UV exposures from sunlight. However, relatively inexpensive sunlamps, e. g. the UVA-340, that emit a UV power spectrum similar to that of a solar simulator are available. Unlike FS-type UVB sunlamps, which have a significant amount of effective immunosuppressive nonsolar UV energy at wavelengths below 295 nm, the immunosuppression effectiveness spectrum of UVA-340 sunlamps was nearly identical to that of a solar simulator. The purpose of this study was to evaluate this sunlamp for conducting photoimmunological and sunscreen immune protection studies. Groups of C3H mice were exposed to a range of UVA-340 sunlamp doses (0.25 KJ/m² to 20.0 KJ/m²) to establish a dose-response curve and determine the minimum immune suppression dose (MISD) for induction of local-type suppression of contact hypersensitivity (CH). The MISD, defined as the lowest UV dose given to produce ～50% suppression of the CH response in mice, was determined to be 1.0 kJ/m² for UVA-340 sunlamps. Immune protection tests on four marketed sunscreen lotions (sun protection factors [SPF] 4, 8, 15 and 30) were then conducted with UVA-340 sunlamps using MISD as the endpoint. The immune protection factors for these sunscreens were equivalent to the level of protection predicated by their labeled SPF. These results are similar to those we have previously obtained using a solar simulator. We conclude from these data that the immunosuppressive effects of UVA-340 sunlamps are similar to those of a solar simulator; however, further studies are needed to determine if UVA-340, or similar, sunlamps are a viable alternative to the solar simulator for conducting large-scale animal experiments that require a relevant UV solar spectrum.     

Rearrangements of organometallic compounds : XVII. Synthesis of lactones via the titanium-catalyzed hydromagnesiation of alkenols

An efficient, two-step synthesis is presented for preparing γ- and δ-lactones from aldehydes or ketones. (1) the addition of vinyl- or allyl-Grignard reagents to the appropriate carbonyl substrate; and (2) the titanium-catalyzed hydromagnesiation of the resulting alkenols with ethyl Grignard reagent and (η⁵-C₅H₅)₂TiCl₂, followed by carbonation. The selectivity of hydrometallation observed with 3-butenyl(methyl)vinylcarbinol indicates the importance of alkoxytitanium hydrides in determining the course of reaction.     

Ring strain and its effect on the rate of the general-base catalyzed enolization of cyclobutanone

[reaction: see text] The 3-quinuclidinone-catalyzed (pK(BH) = 7.5) enolization of cyclobutanone (1) in D(2)O at 25 degrees C, I = 1.0 (KCl) was followed by deuterium incorporation, which was determined by (1)H NMR. The second-order rate constant for the buffer-catalyzed deprotonation of 1 was found to be k(B) = 3.3 x 10(-4) M(-1) s(-1), which is compared to rates for acetone and 2-(2'-oxopropyl)benzaldehyde under similar conditions. The data shows that ring strain has very little effect on the energy barrier to deprotonation of 1 vs the unstrained systems.