Evaluation of the enantiomeric selectivity in the chiral ligand-exchange chromatography of amino acids by a computational model

The chromatographic resolution of enantiomeric amino acids is accomplished on a reversed phase column using aqueous mobile phase containing the chiral reagent N,N-dimethyl-S-phenylalanine-Cu(II). The separation is a result of the whole interaction between the diastereomeric complex surface and the mixed stationary phase realized by the dynamic coating of the RP-18 carbon chains layer. The elution order seems to be related to the different water coordination capability on copper ion in the formation of the mixed ternary complexes.     

Amperometric detection of nitrite and nitrate at tetraruthenated porphyrin-modified electrodes in a continuous-flow assembly

The modification of a glassy carbon surface by coating with an electrostatically assembled film of tetraruthenated cobalt porphyrin/(meso-tetra(4-sulphonatephenyl)porphyrinate zinc(II) yields an indicator electrode that allows the determination of nitrite to be performed with a limit of detection of 0.1 μM in a flow injection configuration. The dynamic range extends up to 1000 μM and the repeatability of the measurements was evaluated to be 1.5% with a throughput of 50 samples per hour. The efficiency of the bilayered film to mediate the electron transfer allows the determinations to be performed at a less positive potential (+0.75 V) with enhanced sensitivity. The coating also prevents the surface poisoning and its stability is maintained over several weeks. The same detector was used for determination of nitrate after reduction to nitrite in a reductor column containing copperised cadmium. This method was used for the determination of nitrate and nitrite in mineral water, saliva and cured meats, the results being in agreement with certified values and those obtained by using recommended procedures.     

The reactivity, as electrogenerated bases, of chiral and achiral phenazine radical-anions, including application in asymmetric deprotonation

Radical-anions, electrochemically generated in aprotic solvent from C(2) symmetric homochiral phenazine derivatives, act as chiral electrogenerated bases (EGBs) in the desymmetrisation by selective deprotonation of a prochiral epoxide (3,4-epoxy-2,3,4,5-tetrahydrothiophene-1,1-dioxide); the anion produced is trapped by mesitoic anhydride. The phenazines may be recovered in high yield by air oxidation. Enantiomeric excesses are modest (8-34%) but this is to our knowledge the first demonstration of such stereoselective electrochemically-initiated deprotonation. The reactivity of phenazine radical-anions as EGBs has also been explored by measurements of the rates of proton transfer; the prochiral epoxide was found to have a kinetic acidity similar to that of the methyltriphenylphosphonium cation.     

Solid-state supramolecular organization, established directly from powder diffraction data, and photoluminescence efficiency of rigid-core oligothiophene-S,S-dioxides

The "rigid-core" material 3,5-dimethyl-2,3'-bis(3-methylthiophene)-dithieno[3,2-b:',3'-d]thiophene-4,4-dioxide (DTTOMe4) has the highest photoluminescence ever reported for thiophene-based molecules in the solid state. We report the structure of this material, determined directly from powder X-ray diffraction data using the Genetic Algorithm method for structure solution, followed by Rietveld refinement, and the structural properties are discussed in relation to the structures of the corresponding subsystems DTTO and DTTOMe. While the crystal structures of the latter compounds contain cofacial dimers, the crystal structure of DTTOMe4 comprises layers of molecules aligned in an antiparallel fashion. Intermediate neglect of differential overlap with single configuration interaction (INDO/SCI) calculations on the intermolecular interactions in the three crystal structures show that the different solid-state photoluminescence efficiencies of DTTOMe4, DTTOMe, and DTTO cannot be correlated with the different types of dipole-dipole alignment in the solid state. Instead, photoluminescence efficiencies correlate well with the rate of formation of nonradiatively decaying charge-transfer pairs upon photoexcitation. Because of larger intermolecular distances in DTTOMe4, the photoluminescence is less effectively quenched by charge-transfer processes than in DTTOMe and DTTO.     

Solvent dependent conformational isomerism and ligand oxidation of novel Ru(II) cyclen complexes

The synthesis of cis-[Ru(II)(cyclen)(L)(x)](n+) (cyclen = 1,4,7,10-tetraazacyclododecane and L = 2,2'-bipyridine (bpy), phenanthroline (phen) or 4-cyanopyridinium (4-NCpyH(+))) is reported. The freshly prepared complexes are stable in aprotic solvents and cyclen undergoes oxidative dehydrogenation reaction at high pH. These compounds also present solvent dependent conformational isomerization.     

Quantitative analysis of 2-furfural and 5-methylfurfural in different Italian vinegars by headspace solid-phase microextraction coupled to gas chromatography-mass spectrometry using isotope dilution

A new method was developed for the determination of 2-furfural (2-F) and 5-methylfurfural (5-MF), two products of Maillard reaction in vinegar, with head-space solid-phase microextraction (HS-SPME) coupled to gas chromatography-mass spectrometry (GC-MS). A divinylbenzene (DVB)/carboxen (CAR)/polydimethylsiloxane (PDMS) fibre was used and SPME conditions were optimised, studying ionic strength effect, temperature effect and adsorption time. Both analytes were determined by calibration established on 2-furfural-d4 (2-F-d4). The method showed good linearity in the range studied (from 16 to 0.12 mg/l), with a regression coefficient r2 of 0.9999. Inter-batch precision and accuracy were found between 14.9 and 6.0% and between -11.7 and 0.2%, respectively. Detection limit was 15 microg/l. The method is simple and accurate and it has been applied to a series of balsamic and non-balsamic vinegars.     

Quantum chemical evaluation of protein control over heme ligation: CO/O2 discrimination in myoglobin

Control of O2 versus CO binding in myoglobin (Mb) is tuned by a distal histidine residue through steric and H-bonding interactions. These interactions have been evaluated via Car-Parrinello DFT calculations, whose efficiency allows full quantum mechanical treatment of the 13 closest residues surrounding the heme. The small (8 degrees ) deviation of the Fe-C-O bond angle from linearity results from the steric influence of a distal valine residue and not the distal histidine. H-bond energies were evaluated by replacing the distal histidine with the non-H-bonding residue isoleucine. Binding energies for CO and O2 decreased by 0.8 and 4.1 kcal/mol for MbCO and MbO2, in good agreement with experimental H-bond estimates. Ligand discrimination is dominated by distal histidine H-bonding, which is also found to stabilize a metastable side-on isomer of MbO2 that may play a key role in MbO2 photodynamics.     

Determination of cobalt in urine by gas chromatography-mass spectrometry employing nickel as an internal standard.

In addition to the electric field and pH gradient used in isoelectric focusing, a recently introduced technique, isoelectric focusing (or electrical hyperlayer) field-flow fractionation, employs the flow of the liquid carrier through a thin separation channel as a third factor affecting separation. Focusing of cytochrome c (CYTC) in a trapezoidal cross-section channel of 0.875 ml volume and 25 cm length was investigated as a function of the injection procedure, relaxation time, flow-rate of the carrier ampholyte solution and applied electric power. The influence of different initial conditions was also investigated by computer simulation. Both computed and experimental data showed an important contribution of the injection procedure and relaxation time on the retention and shape of the CYTC zone. It follows from these data that the sample should be injected as a narrow zone into the centre of the stream rather than homogeneously together with the carrier solution. For the described experimental set-up it could be demonstrated that the time necessary for zone formation should be at least 15 min and that relaxation times in excess to 20 min do not influence the final shape of the CYTC zone. It could further be shown experimentally that the sample must be injected under an applied electric field, that the relaxation time should be about 10 min, that the elution flow-rate should not be larger than 100 μl/min, that focusing becomes more efficient with increasing electric fields and that, for a given assembly and specified flow conditions, there is an electric power window only within which proper operation is possible.     

Heme-protein active site models via self-assembly in water

[structure: see text] Water-soluble models of heme-protein active sites are obtained via the self-assembly of cationic porphyrins 1 and tetrasulfonato calix[4]arene 2 (K(1.2)() = 10(5) M(-)(1)). Selective binding of ligands either outside or inside the cavity of assemblies 1.2 via coordination to the zinc center has been observed. Small ligands such as 4-methylpyridine and 1-methylimidazole are encapsulated, while the bulkier caffeine is bound outside. Assemblies Co-1.2, in which the Zn porphyrin moiety has been replaced by a Co(II) porphyrin, can act as O(2) carriers.