UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

Synthesis and characterization of oligosalicylaldehyde-based epoxy resins

The synthesis of a new epoxy resin of oligosalicylaldehyde by the reaction with epichlorohydrin is reported. New resin’s epoxy value and chlorine content were determined and found to be 25% and 1%, respectively. The characterization of the new resin was instrumented by FTIR, ¹H NMR, scanning electron microscopy, and thermal gravimetric analyses. TGA results showed that the cured epoxy resin has a good resistance to thermal decomposition. The mass losses of cured epoxy resin were found to be 5%, 10%, 50% at 175°C, 240°C, and 400°C, respectively. On the curing procedure the resin was cured with polyethylenepolyamine at 25 °C for 8 h and 100°C for 1.5 h. The FTIR spectrum of new epoxy resin gave the peak of oxirane ring at ṽ = 918 cm⁻¹. In memory of Professor Dr. Adalet R. Vilayetoğlu     

An ultrasensitive method for the determination of thiouracil and phenylthiouracil using capillary zone electrophoresis and laser-induced fluorescence detection

This paper reports the development of a method based on capillary electrophoresis with laser-induced fluorescence detection for the simultaneous determination of thiouracil (TU) and phenylthiouracil (PhTU) with high sensitivity (nanomolar range, i.e., attomoles detected). After derivatization with 5-iodoacetamidofluorescein, the analytes were separated by capillary zone electrophoresis using 20 mM phosphate buffer (pH 10.0) and quantified by fluorescence detection. The linearity range, precision, recovery, and detection limits were determined, and the method was shown to be applicable for the determination of TU and PhTU in spiked feed samples and urine.     

Thermodynamic analysis of the province of Ravenna (Italy)

This is a thermodynamic analysis of the Province of Ravenna (Italy) and its districts (Ravenna, Faenza and Lugo) and an evaluation of entropy waste production based on a balance sheet of greenhouse gases. The method used is energy analysis. The results show that the Province and Ravenna are characterized by a heavy exploitation of local non renewable resources, Faenza strikes a good balance between economic development and environment conservation and Lugo is less sustainable than the others. The greenhouse gas balance shows that the Province emits 10.5 times the quantity of greenhouse gases that it adsorbs and that the emissions reduction is required in the energy sector, which is responsible for 92% of the total.     

Interfacial adsorption of microorganisms and its effect on oxygen absorption by fermentation broths

Steady-state mass transfer experiments were done to determine whether certain strains of bacteria in homogeneous suspension will accumulate at the gas:liquid interface and thereby significantly increase the oxygen transfer rate to the suspension. In particular, with suspensions ofB. licheniformis, the measured transfer rates are as much as three times the rate expected for a uniform suspension. In contrast, suspensions ofM. luteus show no increase in oxygen flux above expected values. The fact thatB. licheniformis is motile, whereasM. luteus is not suggests that cell motility may play an important role in the accumulation process.

     

Multivariate optimization of an axially-viewed inductively coupled plasma multichannel-based emission spectrometer for the analysis of environmental samples

An experimental design procedure was applied to optimize the operating conditions of an axially-viewed inductively coupled plasma emission spectrometer instruments equipped with echelle optics with cross dispersion and charge transfer device. The multivariate effect of carrier gas flow rate and r.f. power on several analytical figures was investigated and discussed. Both ultrasonic and pneumatic nebulization were used. For the final choice of the optimum, different criteria were taken into account, mainly plasma robustness, instrumental precision, analyte and background net emission, detection limits and signal-to-background ratios. It was found that the use of moderate power (1100W) and mean carrier gas flow rate (0.75 L/min) allows to obtain sufficient plasma robustness, satisfactory precision, and excellent signal-to-background ratios and limits of detection, favorable for ultratrace element determinations in environmental matrices.     

1,3-Diaxial steric effects and intramolecular hydrogen bonding in the conformational equilibria of new cis-1,3-disubstituted cyclohexanes using low temperature NMR spectra and theoretical calculations

The conformational equilibria of 3-X-cyclohexanol [X=F (1), Cl (2), Br (3), I (4), Me (5), NMe(2) (6) and MeO (7)] and of 3-X-methoxycyclohexane [X=F (8), Cl (9), Br (10), I (11), Me (12), NMe(2) (13) and MeO (14)] cis isomers were determined from low temperature NMR spectra and PCMODEL calculated coupling constants. The energy differences between aa and ee conformers were obtained from these data (DeltaG(J)(av) and DeltaG(PC)(av), respectively) and also by the additivity principle from data for the monosubstituted cyclohexanes (DeltaG(Ad)). H-1 and H-3 hydrogen vicinal coupling constants and DeltaG(J)(av) values showed that the diequatorial conformer is predominant in the conformational equilibrium of the compounds studied at low temperature. However, DeltaG(PC)(av) data show that compounds 6 and 7 constitute an exception, since they are almost equally populated by ee and aa at room temperature, due to stabilization of their aa conformer by an intramolecular hydrogen bond. DeltaG(Ad) values, obtained according to the additivity principle, show a better agreement for compounds 2 and 3, since the 1,3-diaxial steric effect is counterbalanced by the formation of an intramolecular hydrogen bond (IAHB). For the remaining compounds, DeltaG(Ad) values underestimate the energy differences, since the 1,3-diaxial steric effect, between X and OH or OCH(3), is absent in the monosubstituted compounds used as references. Moreover, the DeltaG(PC)(av), calculated from the coupling constants, obtained through the PCMODEL program, are rather smaller than the DeltaG(J)(av) values, since the program does not have parameters for the effect, observed in this report, of a substituent at gamma position on coupling constants values for the hydrogen under consideration.     

Identifying acetylated lignin units in non-wood fibers using pyrolysis-gas chromatography/mass spectrometry

A series of non-wood plant fibers, namely kenaf, jute, sisal and abaca, have been analyzed upon pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) of the whole material. The pyrolysis products mainly arise from the carbohydrate and lignin moieties of the fibers. The lignin-derived phenols belonged to the p-hydroxyphenylpropanoid (H), guaiacylpropanoid (G) and syringylpropanoid (S) structures, and showed a high S/G ratio of between 2.0 and 5.4, the highest corresponding to kenaf. Among the lignin-derived phenols released, small amounts of sinapyl and coniferyl acetates (in both cis- and trans-forms) were identified for the first time upon Py-GC/MS of lignocellulosic materials. Acetylation of the sinapyl and coniferyl alcohols was at the gamma-position of the side chain. The release of these alcohols derived from intact acetylated lignin units upon pyrolysis seems to indicate that the native lignin in the fibers selected for this study is at least partially acetylated. Sinapyl (and coniferyl) acetates have recently been suggested to be authentic lignin precursors involved in the polymerization of lignin along with the normal sinapyl and coniferyl alcohols. Py-GC/MS will offer a convenient and rapid tool for analyzing naturally acetylated lignins, as well as to screen plant materials for the presence of acetylated units in lignin.     

Phase evolution of a barium tin 1,2-ethanediolato complex to barium stannate during thermal decomposition

The thermal behaviour of [Ba(C₂H₆O₂)₄][Sn(C₂H₄O₂)₃] used as a BaSnO₃ precursor, and its phase evolution during thermal decomposition are described. The initially formed transient barium tin oxycarbonate phase disintegrates into BaCO₃ and SnO₂, reacting subsequently to BaSnO₃. The existence of the intermediate oxycarbonate phase is evidenced by Fourier transformed infrared (FT-IR), X-ray powder diffraction (XRD) and electron energy loss spectroscopy (EELS (ELNES)) investigations.