Influence of γ-radiation on the properties of Langmuir-Blodgett films of poly (3-hexadecylthiophene) in interaction with selected environment-polluting gases

The influence of -radiation on the electric properties of Langmuir-Blodgett (LB) films of partially iodine-doped poly-(3-hexadecylthiophene) and stearic acid in interaction with selected environment-polluting gases has been studied. CO₂, CO and NO₂ increase the LB films conductivity and NO has a tendency to decrease the electric conductivity. The influence of -radiation was expressive onyl in the case of CO₂, whereas NO₂ brought about degradation of the conductive polymer.     

Spectroscopic and photochemical properties of the lichen compound lobaric acid

Lichens synthesize and accumulate photoprotective compounds against possible damage induced by UV radiation in the photobiont. A biological model has been recently formulated that allows the use of lichens to evaluate changes at different UV radiation levels. The thermodynamics, photophysical and photochemical properties of lobaric acid were studied in acetonitrile, ethanol and Brij 35(3%) micelles at different pH values. Also the sun protector factor (SPF) was determined by in vitro methods. Lobaric acid was extracted from Stereoculon alpinum Laur. and characterized by means of standard procedures. Solutions were irradiated in oxygen and under nitrogen conditions with a UV medium pressure lamp. Lobaric acid absorbs at 287, 303 nm, and no fluorescence emission was observed. The maximum value of the molar extinction coefficient (5479.6 M(-1) cm(-1)) was obtained in Brij 35 at pH 12. Solubility is pH dependant and is highest in Brij 35 at pH 12 (4.45 x 10(-4) M). Photoconsumption quantum yields ranged between 10(-4) and 10(-5) in aerobic and anaerobic experimental conditions. Lobaric acid SPF was very low (0.5) compared with homosalate (4.0), (reference solar filter). Two pKa values, 5.05 (carboxylic acid group deprotonation) and 9.75 (phenolic OH deprotonation), were determined.     

Electrothermal vaporisation ICP-mass spectrometry (ETV-ICP-MS) for the determination and speciation of trace elements in solid samples - A review of real-life applications from the author's lab

The use of electrothermal vaporisation (ETV) from a graphite furnace as a means of sample introduction in inductively coupled plasma mass spectrometry (ICP-MS) permits the direct analysis of solid samples. A multi-step furnace temperature programme is used to separate the vaporisation of the target element(s) and of the matrix components from one another. Sometimes, a chemical modifier is used to enable a higher thermal pre-treatment temperature, by avoiding premature analyte losses (stabilisation) or promoting the selective volatilisation of matrix components. In almost all instances, accurate results can be obtained via external calibration or single standard addition using an aqueous standard solution. Absolute limits of detection are typically ~1 pg, which corresponds to 1 ng/g for a typical sample mass of 1 mg. Real-life applications carried out in the author's lab are used to illustrate the utility of this approach. These applications aim at trace element determination in industrial and environmental materials. The industrial materials analysed include different types of plastics - Carilon, polyethylene, poly(ethyleneterephtalate) and polyamide - and photo- and thermographic materials. As samples from environmental origin, plant material, animal tissue and sediments were investigated. Some applications aimed at a multi-element determination, while in other, the content of a single, but often challenging, element (e.g., Si or S) had to be measured. ETV-ICP-MS was also used in elemental speciation studies. Separation of Se-containing proteins was accomplished using polyacrylamide gel electrophoresis (PAGE). Subsequent quantification of the Se content in the protein spots was carried out using ETV-ICP-MS. As the volatilisation of methylmercury and inorganic mercury could be separated from one another with respect to time, no chromatographic or electrophoretic separation procedure was required, but ETV-ICP-MS as such sufficed for Hg speciation in fish tissue.     

Tetrathiafulvalene crowns: redox-switchable ligands

A series of redox-responsive ligands that associate the electroactive tetrathiafulvalene core with polyether subunits of various lengths has been synthesized. X-ray structures are provided for each of the free ligands. The requisite structural criteria for reaching switchable ligands are satisfied for the largest macrocycles, that is, planarity of the 1,1',3,3'-tetrathiafulvalene (TTF) pi system and correctly oriented coordinating atoms. The ability of these ligands to recognize various metal cations as a function of the cavity size has been investigated by various techniques (LSIMS, 1H NMR, and UV/Vis spectroscopy, cyclic voltammetry). These systems exhibit an unprecedented high coordination ability among TTF crown ethers. Their switchable ligating properties have been confirmed by cyclic voltammetry, and metal-cation complexation has been illustrated by X-ray structures of three of the corresponding metal complexes (Pb2+, Sr2+, and Ba2+). Solid-state structures of these complexes display original packing modes with channel-like arrangements.     

Cloud point extraction of vanadium in parenteral solutions using a nonionic surfactant (PONPE 5.0) and determination by flow injection-inductively coupled plasma optical emission spectrometry

A preconcentration and determination methodology for vanadium at trace levels in parenteral solutions was developed. Cloud point extraction was successfully employed for the preconcentration of vanadium prior to inductively coupled plasma atomic optical emission spectrometry (ICP-OES) coupled to a flow injection (FI) system. The vanadium was extracted as vanadium-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol [V-(5-Br-PADAP)] complex, at pH 3.7 mediated by micelles of the nonionic surfactant polyoxyethylene (5.0) nonylphenol (PONPE 5.0). The extracted surfactant-rich phase (100 mul) was mixed with 100 mul of ethanol and this final volume injected into ICP-OES for the vanadium determination. Under these conditions, the 50 ml sample solution preconcentration allowed raising an enrichment factor of 250-fold; however, it was possible to obtain a theoretical enrichment factor of 500-fold. The lower limit of detection (LOD) obtained under the optimal conditions was 16 ng l(-1). The precision for 10 replicate determinations at the 2.0 mug l(-1) V level was 2.3% relative standard deviation (RSD), calculated with the peak heights. The calibration graph using the preconcentration system for vanadium was linear with a correlation coefficient of 0.9996 at levels near the detection limits up to at least 50 mug l(-1). The method was successfully applied to the determination of vanadium in parenteral solution samples.     

Synthesis of N,N'-Diacyl-1,2-di-(4-pyridyl)ethylenedianiines

Reaction of N-(4-pyridylmethyl)benzamide N-oxides with acetic anhydride yielded dimerization compounds. This dimerization occurs at the atom attached to the pyridine ring. These compounds so obtained were evaluated for analgesic and antiinflammatory activity.     

Determination of total iron in standard rocks by spectrophotometric titration with EDTA

A method for the determination of total iron in silicate rocks is described. It is based on spectrophotometric titration of iron(III) with EDTA after decomposition in a PTFE bomb. No prior separation of interfering elements is needed. The method was tested by analysis of the U.S. Geological Survey reference rocks G-2, AGV-1, GSP-1, BCR-1 and PCC-1. The same sample solutions were also analysed by atomic-absorption spectrophotometry. The agreement with published and recommended values was good.     

Coloring linear hypergraphs: the Erdős–Faber–Lovász conjecture and the Combinatorial Nullstellensatz

Designs, Codes and Cryptography - The long-standing Erdős–Faber–Lovász conjecture states that every n-uniform linear hypergaph with n edges has a proper vertex-coloring using...     

Profit maximization in an inventory system with time-varying demand,partial backordering and discrete inventory cycle

In this paper, an inventory problem where the inventory cycle must be an integer multiple of a known basic period is considered. Furthermore, the demand rate in each basic period is a power time-dependent function. Shortages are allowed but, taking necessities or interests of the customers into account, only a fixed proportion of the demand during the stock-out period is satisfied with the arrival of the next replenishment. The costs related to the management of the inventory system are the ordering cost, the purchasing cost, the holding cost, the backordering cost and the lost sale cost. The problem is to determine the best inventory policy that maximizes the profit per unit time, which is the difference between the income obtained from the sales of the product and the sum of the previous costs. The modeling of the inventory problem leads to an integer nonlinear mathematical programming problem. To solve this problem, a new and efficient algorithm to calculate the optimal inventory cycle and the economic order quantity is proposed. Numerical examples are presented to illustrate how the algorithm works to determine the best inventory policies. A sensitivity analysis of the optimal policy with respect to some parameters of the inventory system is developed. Finally, conclusions and suggestions for future research lines are given.

     

Calculating a function of a matrix with a real spectrum

Let T be a square matrix with a real spectrum, and let f be an analytic function. The problem of the approximate calculation of f(T) is discussed. Applying the Schur triangular decomposition and the reordering, one can assume that T is triangular and its diagonal entries t_ii are arranged in increasing order. To avoid calculations using the differences t_ii ? t_jj with close (including equal) t_ii and t_jj, it is proposed to represent T in a block form and calculate the two main block diagonals using interpolating polynomials. The rest of the f(T) entries can be calculated using the Parlett recurrence algorithm. It is also proposed to perform some scalar operations (such as the building of interpolating polynomials) with an enlarged number of significant decimal digits.