HPLC-ESI-MS and MS/MS structural characterization of multifucosylated N-glycoforms of the basic proline-rich protein IB-8a CON1+ in human saliva

This study describes the characterization of the glycan moieties and the peptide backbone of six glycoforms of IB-8a CON1(+), a basic proline-rich protein present in human saliva. MS analyses on the intact glycoproteins before and after N-deglycosylation with PNGase F and high-resolution MS/MS sequencing by LTQ Orbitrap XL of peptides and glycopeptides from tryptic digests allowed the structural characterization of the glycan moieties and the polypeptide backbone, as well as to establish the glycosylation site at the asparagine residue at 98th position. Five of the glycoforms carry a biantennary N-linked glycan fucosylated in the innermost N-acetylglucosamine of the core and showing from zero to four additional fucoses in the antennal region. The sixth glycoform carries a monoantennary monofucosylated oligosaccharide. The glycoform cluster was detected on 28 of 71 adult saliva specimens. Level of fucosylation showed interindividual variability with the major relative abundance for the trifucosylated glycoform. Nonglycosylated IB-8a CON1(+) and the variant IB-8a CON1(-), lacking of the glycosylation site, have been also detected in human saliva.     

Reversible formation of a PdC(x) phase in Pd nanoparticles upon CO and O2 exposure

The structure and chemical composition of Pd nanoparticles exposed to pure CO and mixtures of CO and O(2) at elevated temperatures have been studied in situ by a combination of X-ray Diffraction and X-ray Photoelectron Spectroscopy in pressures ranging from ultra high vacuum to 10 mbar and from room temperature to a few hundred degrees celsius. Our investigation shows that under CO exposure, above a certain temperature, carbon dissolves into the Pd particles forming a carbide phase. Upon exposure to CO and O(2) mixtures, the carbide phase forms and disappears reversibly, switching at the stoichiometric ratio for CO oxidation. This finding opens new scenarios for the understanding of catalytic oxidation of C-based molecules.     

Layered Na(0.71)CoO(2): a powerful candidate for viable and high performance Na-batteries

The present study reports on the synthesis and the electrochemical behavior of Na(0.71)CoO(2), a promising candidate as cathode for Na-based batteries. The material was obtained in two different morphologies by a double-step route, which is cheap and easy to scale up: the hydrothermal synthesis to produce Co(3)O(4) with tailored and nanometric morphology, followed by the solid-state reaction with NaOH, or alternatively with Na(2)CO(3), to promote Na intercalation. Both products are highly crystalline and have the P2-Na(0.71)CoO(2) crystal phase, but differ in the respective morphologies. The material obtained from Na(2)CO(3) have a narrow particle length (edge to edge) distribution and 2D platelet morphology, while those from NaOH exhibit large microcrystals, irregular in shape, with broad particle length distribution and undefined exposed surfaces. Electrochemical analysis shows the good performances of these materials as a positive electrode for Na-ion half cells. In particular, Na(0.71)CoO(2) thin microplatelets exhibit the best behavior with stable discharge specific capacities of 120 and 80 mAh g(-1) at 5 and 40 mA g(-1), respectively, in the range 2.0-3.9 V vs. Na(+)/Na. These outstanding properties make this material a promising candidate to construct viable and high-performance Na-based batteries.     

Self-assembly of a catechol-based macrocycle at the liquid-solid interface: experiments and molecular dynamics simulations

This combined experimental (STM, XPS) and molecular dynamics simulation study highlights the complex and subtle interplay of solvent effects and surface interactions on the 2-D self-assembly pattern of a Schiff-base macrocycle containing catechol moieties at the liquid-solid interface. STM imaging reveals a hexagonal ordering of the macrocycles at the n-tetradecane/Au(111) interface, compatible with a desorption of the lateral chains of the macrocycle. Interestingly, all the triangular-shaped macrocycles are oriented in the same direction, avoiding a close-packed structure. XPS experiments indicate the presence of a strong macrocycle-surface interaction. Also, MD simulations reveal substantial solvent effects. In particular, we find that co-adsorption of solvent molecules with the macrocycles induces desorption of lateral chains, and the solvent molecules act as spacers stabilizing the open self-assembly pattern.     

Solvent effects on electron-driven proton-transfer processes: adenine-thymine base pairs

Time-Dependent Density Functional Theory (TD-DFT) computations, with M05-2X and PBE0 functionals, have been employed for a detailed study of the Electron-Driven Proton-Transfer (PT) processes in an Adenine-Thymine Watson-Crick Base Pair in the gas phase and in solution, with the bulk solvent described by the polarizable continuum model. In the gas phase, TD-DFT computations predict that the Adenine → Thymine Charge Transfer (CT) excited state undergoes a barrierless PT reaction, in agreement with CC2 computations (S. Perun, A. Sobolewski, W. Domcke, J. Phys. Chem. A, 2006, 110, 9031.). The good agreement between the TD-DFT approach and CC2 results validates the former for the studies of excited state properties, excited state proton transfer reaction, and deactivation mechanisms in the DNA base pairs. Next, it is shown that inclusion of solvent effects significantly influences the possibility of both barrier-less excited state proton transfer and radiation-less deactivation through conical intersection with the ground state, affecting the energy of the CT excited state in the Franck-Condon region, the energy barrier associated to the PT process and the energy gap with the ground electronic state. These findings clearly indicate that environmental effects, with a special attention to proper treatment of dynamical solvation effects, have to be included for reliable computational analysis of photophysical and photochemical processes occurring in condensed phases.     

NIR emitting ytterbium chelates for colourless luminescent solar concentrators

A new oxyiminopyrazole-based ytterbium chelate enables NIR emission upon UV excitation in colorless single layer luminescent solar concentrators for building integrated photovoltaics.     

Integrated three-dimensional filter separates nanoscale from microscale elements in a microfluidic chip

We report on the integration of a size-based three-dimensional filter, with micrometre-sized pores, in a commercial microfluidic chip. The filter is fabricated inside an already sealed microfluidic channel using the unique capabilities of two-photon polymerization. This direct-write technique enables integration of the filter by post-processing in a chip that has been fabricated by standard technologies. The filter is located at the intersection of two channels in order to control the amount of flow passing through the filter. Tests with a suspension of 3 μm polystyrene spheres in a Rhodamine 6G solution show that 100% of the spheres are stopped, while the fluorescent molecules are transmitted through the filter. We demonstrate operation up to a period of 25 minutes without any evidence of clogging. Preliminary validation of the device for plasma separation from whole blood is shown. Moreover, the filter can be cleaned and reused by reversing the flow.     

An unprecedented switching of the second-order nonlinear optical response in aggregate bis(salicylaldiminato)zinc(II) Schiff-base complexes

A luminescent bis(salicylaldiminato)zinc(II) Schiff-base complex, 1, is characterized by a concentration dependent second-order nonlinear optical response, related to the degree of aggregation of the complex in a dichloromethane solution. The formation of the monomeric adduct, by addition of a Lewis base, such as pyridine, to concentrated solutions of 1, leads to a switch-on of the quadratic hyperpolarizability. This represents an unprecedented mode of NLO switching in molecular materials.     

Dipyridylketone as a versatile ligand precursor for new cationic heteroleptic cyclometalated iridium complexes

Three new bis-cyclometalated iridium(III) complexes, of general formula [Ir(2-phenylpyridine)(2)(L)](+), are reported. The compounds contain a dipyridine-type ligand (L) derived from di-2-pyridylketone (dipyridin-2-ylmethanol, 2,2'-(hydrazonomethylene)dipyridine and 3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile) and were synthesized through two different reaction pathways. The alternative synthetic pathway herein proposed, namely the direct reactions on the complex [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+), overcame the inconveniences encountered with the standard reaction between the dimeric precursor [Ir(2-phenylpyridine)(2)(μ-Cl)](2) and the ancillary ligands (L). The photophysical characterization of the iridium complexes reveals that modifications on the ancillary ligand introduce large changes in the photophysical behaviour of the complexes. High emission quantum yield is associated with the presence of a saturated carbon between the two pyridyl moieties: [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+) and [Ir(2-phenylpyridine)(2)(2,2'-(hydrazonomethylene)dipyridine)](+) are extremely low emissive, while [Ir(2-phenylpyridine)(2)(dipyridin-2-ylmethanol)](+) and [Ir(2-phenylpyridine)(2)(3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile)](+) are good photoemitters. DFT and TD-DFT calculations confirmed the mixed LC/MLCT character of the excited states involved in the absorption and emission processes and highlighted the role of the π-conjugation between the two subunits of the ancillary ligand in determining the nature of the LUMO.     

Does adsorption at hydroxyapatite surfaces induce peptide folding? Insights from large-scale B3LYP calculations

Large-scale periodic quantum mechanical calculations (509 atoms, 7852 atomic orbitals) based on the hybrid B3LYP functional focused on the peptide folding induced by the adsorption on the (001) and (010) hydroxyapatite (HA) surfaces give interesting insights on the role of specific interactions between surface sites and the peptide, which stabilize the helix conformation over the "native" random coil ones for in silico designed model peptides. The two peptides were derived from the 12-Gly oligomer, with one (P1, C-tGGKGGGGGGEGGN-t) and two (P2, C-tGGKGGKEGGEGGN-t) glutamic acid (E) and lysine (K) residue mutations. The most stable gas-phase "native" conformation for both peptides resulted in a random coil (RC) structure, with the helix (H) conformation being ≈100 kJ mol(-1) higher in free energy. The two peptide conformations interact with the HA (001) and (010) surfaces by C═O groups via Ca(2+) ions, by hydrogen bond between NH(2) groups and the basic PO(4)(3-) groups and by a relevant fraction due to dispersion forces. Peptide adsorption was studied on the dry (001) surface, the wet one envisaging 2 H(2)O per surface Ca(2+) and, on the latter, also considering the adsorption of microsolvated peptides with 4 H(2)O molecules located at sites responsible of the interaction with the surface. The P1 mutant does prefer to be adsorbed as a random coil by ≈160 kJ/mol, whereas the reverse is computed for P2, preferring the helix conformation by ≈50 kJ/mol. Adsorption as helix of both P1 and P2 mutants brings about proton transfer toward the HA surfaces with a large charge transfer component to the interaction energy.