Kinetics and Mechanism of Ni(II) Chelation in Model and Real Solutions of Xylem Sap of Quercus ilex

The kinetics of formation and dissociation of Ni(II) complexes with oxalic and citric acids was studied by cyclic voltammetry in model solutions of xylem sap of Q. ilex (the dominant tree growing on serpentine soils of Northeast Portugal) using representative concentrations, pH and ionic strength. The role of magnesium on complex formation was analyzed from solutions where Mg is present at concentration levels found in the xylem sap of Q. ilex growing on both nonserpentine and serpentine soils. Kinetics studies were also done in diluted solutions of real xylem sap samples, spiked with increasing amounts of magnesium. The values obtained for the apparent rate constants were those anticipated by the proposed model. To test the validity of the methodology and mechanisms, formation rate constants, k_f (M^?1 s^?1) of Ni(II) complexes with citrate and oxalate were evaluated that compare with the values from Eigen mechanism.     

Preconcentration Systems Using Polyurethane Foam/Me-BDBD for Determination of Copper in Food Samples

A new reagent, 6-[2′-(6′-methyl-benzothiazolylazo)]-1,2-dihydroxy-3,5-benzenedisulfonic acid (Me-BDBD), was synthesised and used in on-line and off-line systems for copper preconcentration by solid-phase extraction. Spectrophotometry and Flame Atomic Absorption Spectrometry (FAAS) were the detection techniques. Polyurethane foam loaded with Me-BDBD packed in a minicolumn was used as sorbent in both systems. The spectral characteristics of Me-BDBD were investigated. The optimum pH values for maximum sorption of the metal are between 7.0 and 8.5. Copper was desorbed with 0.05 and 0.50 mol L⁻¹ hydrochloric acid solutions, for on-line and off-line systems, respectively. The effects of several foreign substances on the adsorption of copper are reported. The enrichment factors obtained were 7 (on-line) and 26 (off-line) for the systems. The proposed procedures allowed the determination of copper with detection limits of 3.4 and 1.4 μg L⁻¹ (0.85 and 0.35 μg per gram of sample) for on-line and off-line systems, respectively. The precision of the procedures was also calculated: 3.2 (on-line) and 1.9% (off-line). The validation of the procedures was carried out by analysis of certified reference material. The copper contents in corn and rice flour and black tea samples were determined by applying the proposed procedures.     

Spectrophotometric study of the equilibria in aqueous copper(II) azide solutions

The reaction between copper (II) and azide has been studied spectrophotometrically at four wavelengths, at 25 degrees , and ionic strength 4.00M (sodium perchlorate). The formation constants beta(2) and beta(3) found are 2.90 +/- 0.08 x 10(4) and 3.02 +/- 0.07 x 10(6) respectively. The results obtained from potentiometric measurements with a solid-state electrode disagree with those calculated from the spectrophotometric data. Causes of the discrepancy are discussed.     

Development of a simplified method for the simultaneous determination of retinol, α-tocopherol,and β-carotene in serum by liquid chromatography–tandem mass spectrometry with atmospheric pressure chemical ionization

A new and simple method for the determination of fat-soluble vitamins (retinol, alpha-tocopherol, and beta-carotene) in human serum was developed and validated by using liquid chromatography-tandem mass spectrometry with atmospheric pressure chemical ionization (LC-APCI-MS-MS). Different solvent mixtures were tested to obtain deproteinization and extraction of the analytes from the matrix. As a result, a volume of 240 microL of a 1:1 (v/v) ethanol/ethyl acetate mixture added to 60 microL of serum was found to be suitable for both protein precipitation and antioxidants solubilization, giving the best recovery for all three analytes. Deproteinized samples (20 microL) were injected after dilution, without the need for concentration or evaporation to dryness and reconstruction of the sample. Vitamins were separated on a C-8 column using a 95:5 (v/v) methanol/dichloromethane mixture and ionized in the positive-ion mode; detection was performed in the selected-reaction monitoring mode. Linearity of the LC-APCI-MS-MS method was established over 5 orders of magnitude for retinol and alpha-tocopherol, whereas in the case of beta-carotene it was limited to 4 orders. Lower limits of quantitation were 1.7, 2.3, and 4.1 nM for retinol, alpha-tocopherol, and beta-carotene, respectively. Serum concentrations of retinol, alpha-tocopherol, and alpha+beta-carotene determined in a group of healthy volunteers were 2.48, 38.07, and 0.50 microM, respectively, in samples collected in winter ( n=122) and 2.69, 45.88, and 0.90 microM during summer ( n=66).     

Liquid chromatography/tandem mass spectrometry for the identification and determination of trichothecenes in maize

A reliable, sensitive and selective liquid chromatography/tandem mass spectrometry (LC/MS/MS) method has been developed to determine four trichothecene mycotoxins (nivalenol, deoxynivalenol, fusarenon X and 3-acetyldeoxynivalenol) in maize. Sample preparation was performed by extracting the analytes with a mixture of acetonitrile and water, followed by a solid-phase extraction with Carbograph-4 cartridges as the purification step. For the LC/MS/MS analysis two interfacing systems, Turbo IonSpray (TISP) and atmospheric pressure chemical ionization (APCI), were compared in both negative and positive ion modes. LC and MS parameters were optimized to achieve better results and sensitivity. The effect of mobile phase modifiers such as ammonium acetate and formic acid on the ionization yield was also evaluated. The best results were obtained using the electrospray ionization (ESI) interface in negative ion mode and the multiple reaction monitoring mode (MRM) for the quantitation. The detection limits ranged between 10 ng/g for fusarenon X and 1.5 ng/g for deoxynivalenol. A linear working range was achieved with a standard deviation between 3 and 10% and recovery rates from the maize samples above 81%. The procedure was applied to the analysis of a set of maize samples collected from farms located in different areas of northern and central Italy. The investigated samples turned out to be contaminated primarily with deoxynivalenol and, to a minor extent, with its derivatives.     

Fluorescence of the single tryptophan of cutinase: temperature and pH effect on protein conformation and dynamics

The cutinase from Fusarium solani pisi is an enzyme with a single L-tryptophan (Trp) involved in a hydrogen bond with an alanine (Ala) residue and located close to a cystine formed by a disulfide bridge between two cysteine (Cys) residues. The Cys strongly quenches the fluorescence of Trp by both static and dynamic quenching mechanisms. The Trp fluorescence intensity increases by about fourfold on protein melting because of the disruption of the Ala-Trp hydrogen bond that releases the Trp from the vicinity of the cystine residue. The Trp forms charge-transfer complexes with the disulfide bridge, which is disrupted by UV light irradiation of the protein. This results in a 10-fold increase of the Trp fluorescence quantum yield because of the suppression of the static quenching by the cystine residue. The Trp fluorescence anisotropy decays are similar to those in other proteins and were interpreted in terms of the wobbling-in-cone model. The long relaxation time is attributed to the Brownian rotational correlation time of the protein as a whole below the protein-melting temperature and to protein-backbone dynamics above it. The short relaxation time is related to the local motion of the Trp, whose mobility increases on protein denaturation.     

Carbonyl complexes of molybdenum and tungsten with sulfur donors: V. Reactions of carbonyl complexes of molybdenum(0) with uninegative (X,Y)-donor ligands (X,Y = S,N, O)

The reactions of the zerovalent carbonyl complexes Mo(CO)₆ and Mo(CO)₄(bipy) with a series of uninegative bidentate (X,Y)-donor ligands (X,Y = xanthates, dithiocarbamates, o-aminophenoxide, o-aminothiophenoxide, 2-picolinate and thioacetate) lead to new anionic tetracarbonyl complex anions [Mo⁰(X,Y)(CO)₄]^?. These anions, which can be isolated as their tetraphenylphosphonium salts, contain the (X,Y)-ligand as a bidentate group. In the case of (X,Y) = monothioacetate the decarbonylated species [PPh₄][Mo^II(TA)₃] is formed. The reacions of the new complexes with allyl bromide and methyl iodide are described.     

A Layer‐by‐Layer Film of Chitosan in a Taste Sensor Application

Chitosan is alternated with sulfonated polystyrene (PSS) to build layer‐by‐layer (LBL) films that are used as sensing units in an electronic tongue. Using impedance spectroscopy as the principle method of detection, an array using chitosan/PSS LBL film and a bare gold electrode as the sensing units was capable of distinguishing the basic tastes – salty, sweet, bitter, and sour – to a concentration below the human threshold. The suitability of chitosan as a sensing material was confirmed by using this sensor to distinguish red wines according to their vintage, vineyard, and brands.

PCA Plot for red wine samples obtained from impedance measurements at 1 kHz for the sensor array comprising a 3‐bilayer chitosan/PSS film and a bare gold electrode.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.