Pyrrole-Annulated Heterocyclic Systems. Synthesis of 2H-Pyrrolo[3,4-b][1,5]benzothiazepine 4,4-Dioxide Derivatives

Condensation of 2-nitrothiophenol with ethyl propiolate afforded 3-(2-nitrophenylthio)propenoate. Oxidation of sulfur atom to sulfone group gave ethyl 3-(2-nitrophenylsulfonyl)propenoate, which underwent condensation with tosyl methylisocyanide (TosMIC) to yield ethyl 4-(2-nitrophenylsulfonyl)pyrrole-3-carboxylate. Reduction of nitro group afforded ethyl 4-(2-aminophenylsulfonyl)-1H-pyrrole-3-carboxylate, which was cyclized to 2H-pyrrolo[3,4-b][1,5] benzothiazepin-10(9H)-one 4,4-dioxide. Similar procedure was used for the synthesis of 9,10-dihydro-10-methyl-2H-pyrrolo[3,4-b][1,5]benzothiazepine 4,4-dioxide.     

Wetting behavior of pulmonary surfactant aqueous solutions

The wetting properties of pulmonary surfactant aqueous solutions with respect to solid surfaces with different degree of hydrophobicity have been studied. The contact angles θ of drops from a pulmonary surfactant solution onto SiO₂-glass surfaces have been measured as a function of their degree of hydrophobicity θ _w. The completely hydrophilic SiO₂-glass surface is essentially hydrophobized by the animal-derived pulmonary surfactant Curosurf. The hydrophobization depends on the surfactant concentration—the contact angles increase with increasing the Curosurf concentration C _s in the low concentration range, but they remain almost constant in a wide range of C _s >90 μg/ml. Additions like NaCl and bovine serum albumin influence the θ-values. The contact angles θ naturally increase with increasing θ _w but this dependence is not linear—the curve steepens at larger θ _w values. The thickness h of the wetting thin liquid films from Curosurf aqueous solutions depends on the hydrophobicity θ _w of the solid surface and the h(θ _w) curves always pass a minimum. The h-values, as well as the h(θ _w) curve, are mainly determined by the steric and hydrophobic disjoining pressures, which depend on the orientations and conformations of the molecules adsorbed on the solid surface from the very complicated multi-component aqueous solutions.     

Grafting amount and structural characteristics of microcrystalline cellulose functionalized with different aminosilane contents

Cellulose - Microcrystalline cellulose (MCC) has unique properties and its use as reinforcement for polymer composites has been increasing. However, the intrinsic incompatibility with most polymers...     

Zn-Induced Interactions Between SARS-CoV-2 orf7a and BST2/Tetherin

We present in this work a first X-ray Absorption Spectroscopy study of the interactions of Zn with human BST2/tetherin and SARS-CoV-2 orf7a proteins as well as with some of their complexes. The analysis of the XANES region of the measured spectra shows that Zn binds to BST2, as well as to orf7a, thus resulting in the formation of BST2-orf7a complexes. This structural information confirms the the conjecture, recently put forward by some of the present Authors, according to which the accessory orf7a (and possibly also orf8) viral protein are capable of interfering with the BST2 antiviral activity. Our explanation for this behavior is that, when BST2 gets in contact with Zn bound to the orf7a Cys₁₅ ligand, it has the ability of displacing the metal owing to the creation of a new disulfide bridge across the two proteins. The formation of this BST2-orf7a complex destabilizes BST2 dimerization, thus impairing the antiviral activity of the latter.     

Structural Evidence for Pnictogen-Centered Lewis Acidity in Cationic Platinum-Stibine Complexes Featuring Pendent Amino or Ammonium Groups

As part of our continuing interest in the chemistry of cationic antimony Lewis acids as ligands for late transition metals, we have now investigated the synthesis of platinum complexes featuring a triarylstibine ligand substituted by an o-[(dimethylamino)methyl]phenyl group referred to as Ar^N. More specifically, we describe the synthesis of the amino stibine ligand Ph₂SbAr^N (L) and its platinum dichloride complex [LPtCl]Cl which exists as a chloride salt and which shows weak coordination of the amino group to the antimony center. We also report the conversion of [LPtCl]Cl into a tricationic complex [LHPt(SMe₂)]³⁺ which has been isolated as a tris-triflate salt after reaction of [LPtCl]Cl with SMe₂, HOTf and AgOTf. Finally, we show that [LHPt(SMe₂)][OTf]₃ acts as a catalyst for the cyclization of 2-allyl-2-(2-propynyl)malonate.     

1H-NMR Profiling Shows as Specific Constituents Strongly Affect the International EVOO Blends Characteristics: The Case of the Italian Oil

Considering the growing number of extra virgin olive oil (EVOO) producers in the world, knowing the influence of olive oils with different geographical origins on the characteristics of the final blend becomes an interesting goal. The present work is focused on commercial organic EVOO blends obtained by mixing multiple oils from different geographical origins. These blends have been studied by ¹H-NMR spectroscopy supported by multivariate statistical analysis. Specific characteristics of commercial organic EVOO blends originated by mixing oils from Italy, Tunisia, Portugal, Spain, and Greece were found to be associated with the increasing content of the Italian component. A linear progression of the metabolic profile defined characteristics for the analysed samples—up to a plateau level—was found in relation to the content of the main constituent of the Italian oil, the monocultivar Coratina. The Italian constituent percentage appears to be correlated with the fatty acids (oleic) and the polyphenols (tyrosol, hydroxytyrosol, and derivatives) content as major and minor components respectively. These results, which highlight important economic aspects, also show the utility of ¹H-NMR associated with chemometric analysis as a powerful tool in this field. Mixing oils of different national origins, to obtain blends with specific characteristics, could be profitably controlled by this methodology.     

A method for C(alpha) direct-detection in protonless NMR

Attempts are made to efficiently decouple (13)C nuclei without significant loss of coherence during the application of the decoupling package. Such attempts are based on the S(3)E spin-state selection method. A newly developed double S(3)E (DS(3)E) is particularly efficient for C(alpha) detection for proteins as large as 480 kDa.     

Recycling ground tire rubber (GTR) scraps as high‐impact filler of in situ produced polyketone matrix

A sustainable procedure for recycling powdered rubber coming from scrap tires (ground tire rubber [GTR]) is proposed as based on the dispersion in polyketone (PK) matrix, obtained in situ by CO/ethylene copolymerization. Three types of catalysts are used operative in solvents of different polarities. The catalyst productivity and the hybrids morphology are evaluated and optimized to final composites features. The obtained products are characterized by scanning electron microscopy, atomic force microscopy, and solvent extractions in order to investigate the occurrence and the extent of interactions between PK macromolecular chains and the GTR components; and their effects on the final properties were tested by differential scanning calorimetry, thermogravimetric analysis, and rheological measurements. For comparison purpose, a composite with GTR included into the matrix through blending is prepared. The results evidenced the key role exerted by the catalyst that, when operative in apolar solvent (able to swell the rubber phase), provides composites with good interfacial adhesion and breaking up of the particles with beneficial effects on final properties particularly thermal features and processability. Copyright © 2014 John Wiley & Sons, Ltd.     

HPLC‐MS/MS method for quantitative determination of the novel dual inhibitor of FGF and VEGF receptors E‐3810 in tumor tissues from xenograft mice and human biopsies

We developed and validated a high‐performance liquid chromatography–tandem mass spectrometry analytical method to measure E‐3810, a novel dual inhibitor of fibroblast growth factor receptor 1 and vascular endothelial growth factor receptor 1–3 in tissues and determined the drug concentration in a biopsy of human breast cancer for the first time. The method is a modification of our previous one in plasma to study the clinical pharmacokinetics of the drug during the phase I/II trial. In view of the changes in matrix, we applied a partial validation protocol to determine recovery, sensitivity, range of linearity, precision, accuracy and stability of the method over three runs in a mouse tumor tissue and liver. The recovery of E‐3810 from liver or tumor homogenate was >69%, and the lower limit of quantification was 5 ng/ml. The method was linear in the concentration range 5.0–500.0 ng/ml, as demonstrated by a determination coefficient R² ≥ 0.9955. The range of the calibration curve was appropriate for the analysis, as demonstrated by the accuracy, which was between 91.4% and 106.7%. Interday precision and accuracy on quality control samples at 9, 30 and 300 ng/ml were 3.1‐11.2% and 98.3–111.4%, respectively. The assay was applied successfully to determine the intratumor concentration of E‐3810 in different mouse xenograft tumor models and in a biopsy of a patient with breast cancer included in the phase I/II trial of the drug. In mouse tumors, the concentrations of E‐3810 were higher than necessary to exert antitumor activity in vitro (1 µM). Even more of interest was the result obtained in a human biopsy of few milligrams, where E‐3810 reached 4.9 µg/g (11 µM). Copyright © 2014 John Wiley & Sons, Ltd.