Cryogenic microjet source for orthotropic beams of ultralarge superfluid helium droplets

Liquid 4He at pressures P(0)=0.5-30 bars and temperatures T(0)=1.5-4.2 K is discharged into vacuum through two different 2 microm nozzles. The velocities of the beam of particles obey the Bernoulli equation down to 15 m/sec. With decreasing T0 and increasing P0 the velocity and angular distributions become exceedingly narrow with Deltav/v less or similar 1% and Deltatheta less or similar 1 mrad. Optical observations indicate that the beam consists of micron-sized droplets (N greater or similar 10(9) atoms). This new droplet source provides opportunities for novel experimental studies of superfluid behavior.     

Fiber bragg gratings made with a phase mask and 800-nm femtosecond radiation

High-quality retroreflecting fiber Bragg gratings were written in standard Ge-doped telecom fiber (Corning SMF-28) after a few minutes exposure with pulsed 800-nm, 120-fs laser radiation by use of a deep-etch silica zero-order nulled phase mask optimized for 800 nm. Induced index modulations of 1.9 x 10(-3) were achieved with peak power intensities of 1.2 x 10(13) W/cm2 without any fiber sensitization. The fiber gratings are stable and did not erase after 2 weeks at 300 degrees C. The primary mechanism of induced index change results from a structural modification to the fiber core.     

The influence of large-scale seafloor slope and average bottom sound speed on low-grazing-angle monostatic acoustic scattering

Variations in large-scale seafloor slope and average seabed sound speed account for a significant portion of the variations in scattering intensity observed in low-grazing-angle monostatic reverberation. Numerical modeling using a finite-difference solution to the elastic wave equation is used to quantify the effect of these large-scale parameters in interpretations of reverberation data. For hard rough seafloor (e.g., basalt), the results of the modeling suggest that the monostatic backscattering strength increases with increasing large-scale seafloor slope up to a slope of about 15 degrees dipping toward the incident direction. Once the grazing angle of the incident wavefield exceeds the critical grazing angle for the flat reference seafloor the backscattering intensity increases only slowly with increasing grazing angle. Similarly, average subseafloor sound speed has a significant effect. Seafloor with low sound speeds characteristic of soft bottoms (e.g., sediment) generate significantly weaker backscatter signals than seafloor with sound speeds characteristic of hard bottoms (e.g., basalt). The difference is that the shear waves can always be passed into soft bottoms because even for a flat seafloor there is no shear wave critical grazing angle.     

Use of very long-distance NOEs in a fully deuterated protein: an approach for rapid protein fold determination

The high sensitivity of modern NMR instrumentation, in combination with full deuteration, enabled the measurement of long-range NOEs between amide protons in a fully deuterated protein corresponding to distances up to 8A. These are beyond the limit normally observed in protonated samples. Such long-distance NOEs could be observed using long mixing times, which became possible due to reduced spin diffusion and T1 relaxation of the amide protons in the fully deuterated sample. This information was used in combination with secondary structure restraints derived from secondary chemical shifts for structure calculations. With these backbone amide proton NOEs only, a unique fold could be obtained with positional root mean square deviations from the average of 1.30 and 2.25 A for backbone and heavy atoms, respectively. Despite the low density of restraints, no mirror image problems were observed. Addition of sidechain NOE information increased the precision of the ensemble and in particular of the core packing. The structures obtained in this way were close to the published crystal structure. NOE completeness analysis revealed that the cumulative completeness is still more than 80% for an 8.0 A cut-off distance.     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.     

Femtosecond laser-induced damage of gold films

Single- and multi-shot ablation thresholds of gold films in the thickness range of 31-1400 nm were determined employing a Ti:sapphire laser delivering pulses of 28 fs duration, 793 nm center wavelength at 1 kHz repetition rate. The gold layers were deposited on BK7 glass by an electron beam evaporation process and characterized by atomic force microscopy and ellipsometry. A linear dependence of the ablation threshold fluence F_th on the layer thickness d was found for d ≤ 180 nm. If a film thickness of about 180 nm was reached, the damage threshold remained constant at its bulk value. For different numbers of pulses per spot (N-on-1), bulk damage thresholds of ∼0.7 J cm⁻² (1-on-1), 0.5 J cm⁻² (10-on-1), 0.4 J cm⁻² (100-on-1), 0.25 J cm⁻² (1000-on-1), and 0.2 J cm⁻² (10000-on-1) were obtained experimentally indicating an incubation behavior. A characteristic layer thickness of L_c ≈ 180 nm can be defined which is a measure for the heat penetration depth within the electron gas before electron-phonon relaxation occurs. L_c is by more than an order of magnitude larger than the optical absorption length of α⁻¹ ≈ 12 nm at 793 nm wavelength.     

Non-reciprocal transmission via phase conjugation in multimode optical fibres

We demonstrate phase conjugate correction of modal distortion of a single mode beam on double-passing a passive highly multimode fibre. Phase conjugation is achieved in a self-pumped photorefractive BaTiO₃ crystal which conjugates only the e-polarised input component. We show that only a small fraction of the multimode fibre output is required to faithfully conjugate the single mode input beam. This technique enables the demonstration of a novel non-reciprocal transmission device, which for example has immediate application in gain-grating holographic resonator designs with multimode fibres as the active gain medium.     

First measurement of the ratio B(t --> Wb)/B(t --> Wq) and associated limit on the Cabibbo-Kobayashi-Maskawa element /V(tb)/

We present the first measurement of the ratio of branching fractions R identical withB(t-->Wb)/B(t-->Wq) from p_p collisions at sqrt[s] = 1.8 TeV. The data set corresponds to 109 pb(-1) of data recorded by the Collider Detector at Fermilab during the 1992-95 Tevatron run. We measure R = 0.94(+0.31)(-0.24)(stat+syst) or R>0.61 (0.56) at 90% (95)% C.L., in agreement with the standard model predictions. This measurement yields a limit on the Cabibbo-Kobayashi-Maskawa quark mixing matrix element /V(tb)/ under the assumption of three generations and unitarity.     

Interferometric ultrafast SOA-based optical switches: From devices to applications

All-optical switches are fundamental building blocks for future, high-speed optical networks that utilize optical time division multiplexing (OTDM) techniques to achieve single channel data rates exceeding 100 Gb/s. Interferometric optical switches using semiconductor optical amplifier (SOA) non-linearities perform efficient optical switching with < 500 fJ of control energy and are approaching optical sampling bandwidths of nearly 1 THz. In this paper, we review work underway at Princeton University to characterize and demonstrate these optical switches as processing elements in practical networks and systems. Three interferometric optical switch geometries are presented and characterized. We discuss limitations on the minimum temporal width of the switching window and prospects for integrating the devices. Using these optical switches as demultiplexers, we demonstrate two 100-Gb/s testbeds for photonic packet switching. In addition to the optical networking applications, we have explored simultaneous wavelength conversion and pulse width management. We have also designed high bandwidth sampling systems using SOA-based optical switches as analog optical sampling gates capable of analyzing optical waveforms with bandwidths exceeding 100 GHz. We believe these devices represent a versatile approach to all-optical processing as a variety of applications can be performed without significantly changing the device architecture.     

Measurement of d sigma/dM and forward-backward charge asymmetry for high-mass Drell-Yan e(+)e(-) pairs from pp macro collisions at square root of s = 1.8 TeV

We report on a measurement of the mass dependence of the forward-backward charge asymmetry, A(FB), and production cross section d sigma/dM for e(+)e(-) pairs with mass M(ee)>40 GeV/c(2). The data sample consists of 108 pb(-1) of pp macro collisions at square root of s = 1.8 TeV taken by the Collider Detector at Fermilab during 1992-1995. The measured asymmetry and d sigma/dM are compared with the predictions of the standard model and a model with an extra Z' gauge boson.