Pulsed reactive crossed beam laser ablation of La0.6Ca0.4CoO3 using O: Where does the oxygen come from?

The composition of thin perovskite films, especially the oxygen content, is a crucial parameter which influences many physical properties, such as conductivity and catalytic activity. Films produced by pulsed laser deposition are normally annealed in an oxygen atmosphere after deposition to achieve a desired oxygen content. In pulsed reactive crossed beam laser ablation, no annealing step is necessary, but a fundamental question regarding this deposition technique is still open: where does the oxygen in the films come from?There are three possibilities, i.e. from the target, from the gas background, or from the gas pulse. To answer this question two experiments were performed: ¹⁸O₂ was used during the deposition process as background gas with ¹⁶O anions in the target and ¹⁶O₂ gas pulse, and a ¹⁸O₂ gas pulse with ¹⁶O from the target and background. These experiments revealed that the quantification of the oxygen origin is only possible, when no oxygen exchange occurs at the deposition temperature. The films are characterized after deposition by elastic recoil detection analysis (ERDA) to determine the ¹⁶O/¹⁸O ratio. Experiments with different oxidizing species in the gas pulse (N₂O and O₂) confirm that the oxidizing potential (N₂O > O₂) as well as the number of molecules are important.     

Thickness induced transversal percolation in Pt-Al2O3 nano-composites

Investigations of thickness induced percolation process in Pt_ξ-Al₂O₃ nano-composites were carried out using grazing angle X-ray scattering. It is shown that the morphological characteristics of the nano-scaled Pt particles change significantly within the growth transversal direction. The initially non percolated two phases Pt_ξ-Al₂O₃ nano-composites show a noteworthy tendency to a percolated morphology with a gradual transversal increase of Pt nano-particles' average diameter in addition to the increase of the Pt nano-particles' poly-dispersity. This transversal morphological evolution is followed by a percolation phenomenon of the Pt nano-particles for a thickness of about ∼119.5 nm. This transversal morphological evolution seems to corroborate far too much with a columnar growth process.     

Linear sorting withO(logn) processors

A file ofn records can be sorted in linear time givenO(log(n)) processors. Four such algorithms are presented and analyzed. All of them have reasonable hardware requirements; no memory access conflicts are generated; a constant number of communication lines per processor are needed (except for one case); and the space requirements areO(n) orO(n log(log(n))).     

A telescope illumination system for a wide-field endoscope

Endoscopic illumination systems conduct light down a built-in fibre-optic bundle to illuminate the object. Many modern endoscopes employ wide-field imaging optical systems and therefore require an illuminating beam of large divergence. This is commonly provided by placing a strong diverging lens at the far end of the fibre bundle, but it results in a poor uniformity of illumination in the object space. This paper describes the design of a telescopic illumination system to overcome this problem.     

New methodologies in trace analysis of volatile organic compounds

Two methods for sampling and concentration of volatile organic compounds are reported. In the first method, traps coated with a very thick film (ca. 100 μm) of cross-linked silicone stationary phase are employed. Such thick films can be prepared with a modified dynamic coating procedure, which is briefly described. The low phase ratio traps can be utilized for enrichment of volatiles from gaseous as well as aqueous matrices. The second technique is based on chromatographic evaporation of a solvent in a capillary tube, where the process is sustained by a repeated sample injection and a cyclic flow reversal. In this way, large solvent volumes can be handled by a small volume system. Under optimal conditions, when using a solvent barrier, quantitative recovery is possible even for compounds of comparatively high volatility. Another important application of the technique is extraction of trace components from gases such as headspace samples, polluted air, etc.     

Transfer of near-infrared monochromator calibrations for tobacco constituents to tilting-filter instruments

Near-infrared calibrations for water, reducing sugar, glycerin, propylene glycol, nicotine, and menthol in tobacco blends were first obtained with a monochromator instrument. Transfer of calibrations to a tilting-filter instrument for factory trials is shown to be facilitated greatly by the computer-assisted scheme MTRAN. By means of this software, calibration equations were established for a Neotec 51A instrument that is sufficiently rugged for factory use. The predictive capabilities of the transferred calibrations are similar to those of the research monochromator.     

High-throughput concept for tailoring switchable mirrors

The optical properties, the switching kinetics and the lifetime of hydrogen switchable mirrors based on Mg-Ni alloys are determined with particular regard to the composition of the optically active metal-hydride layer in combination with the thickness of the catalytic capping layer. For this, a high-throughput experiment is introduced. The switching kinetics and the reversibility of switchable mirrors are strongly thickness dependent, though the details hinge on the fine structure of the clustered capping layer. Therefore, the kinetics is correlated with the surface structures of Pd on Mg_yNi_1−y as investigated by scanning tunneling microscopy. The results are explained by the so-called strong metal-support interaction (SMSI) state, characterized by a complete encapsulation of the capping layer clusters by oxidized species originating from the support. The SMSI-effect is less important with increasing Pd-layer thickness, and is suppressed by a good wetting of the Pd-clusters on the optically active film. This explains the critical thickness for the catalyzed hydrogen uptake observed in many switchable mirror systems. Moreover, the degradation of the kinetics during cycling is found to depend on the Pd-layer thickness and on the gas environment. Only films, covered with at least 15 nm Pd, show small degradation caused by the SMSI-effect. The SMSI-effect is partly reversible: after changing the gas environment from hydrogen to oxygen, the oxide on the Pd-clusters can be partly removed.     

VUV-UV excited luminescent properties of LnCa4O(BO3)3:RE (Ln=Y, La, Gd; Re=Eu, Tb, Dy, Ce)

Calcium lanthanide oxyborate doped with rare-earth ions LnCa₄O(BO₃)₃:RE³⁺ (LnCOB:RE, Ln=Y, La, Gd, RE=Eu, Tb, Dy, Ce) was synthesized by the method of solid-state reaction at high temperature. Their fluorescent spectra were measured from vacuum ultraviolet (VUV) to visible region at room temperature. Their excitation spectra all have a broadband center at about 188 nm, which is ascribed to host absorption. Using Dorenbos’ and Jφrgensen's work [P. Dorenbos, J. Lumin. 91 (2000) 91, R. Resfeld, C.K. Jφrgensen, Lasers and Excite States of Rare Earth [M], Springer, Berlin, 1977, p. 45], the position of the lowest 5d levels E(Ln,A) and charge transfer band E_ct were calculated and compared with their excitation spectra.Eu³⁺ and Tb³⁺ ions doped into LnCOB show efficient luminescence under VUV and UV irradiation. In this system, Ce³⁺ ions do not show efficient luminescence and quench the luminescence of Tb³⁺ ions when Tb³⁺ and Ce³⁺ ions are co-doped into LnCOB. GdCOB doped with Dy³⁺ shows yellowish white light under irradiation of 254 nm light for the reason that Gd³⁺ ions transfer the energy from itself to Dy³⁺. Because of the existence of Gd³⁺, the samples of GdCOB:RE³⁺ show higher excitation efficiency than LaCOB:RE³⁺ and YCOB:RE³⁺, around 188 nm, which indicates that the Gd³⁺ ions have an effect on the host absorption and can transfer the excitation energy to the luminescent center such as Tb³⁺, Dy³⁺ and Eu³⁺.