Thickness and morphology of polyelectrolyte coatings on silica surfaces before and after protein exposure studied by atomic force microscopy

Analyte–wall interaction is a significant problem in capillary electrophoresis (CE) as it may compromise separation efficiencies and migration time repeatability. In CE, self-assembled polyelectrolyte multilayer films of Polybrene (PB) and dextran sulfate (DS) or poly(vinylsulfonic acid) (PVS) have been used to coat the capillary inner wall and thereby prevent analyte adsorption. In this study, atomic force microscopy (AFM) was employed to investigate the layer thickness and surface morphology of monolayer (PB), bilayer, (PB-DS and PB-PVS), and trilayer (PB-DS-PB and PB-PVS-PB) coatings on glass surfaces. AFM nanoshaving experiments providing height distributions demonstrated that the coating procedures led to average layer thicknesses between 1 nm (PB) and 5 nm (PB-DS-PB), suggesting the individual polyelectrolytes adhere flat on the silica surface. Investigation of the surface morphology of the different coatings by AFM revealed that the PB coating does not completely cover the silica surface, whereas full coverage was observed for the trilayer coatings. The DS-containing coatings appeared on average 1 nm thicker than the corresponding PVS-containing coatings, which could be attributed to the molecular structure of the anionic polymers applied. Upon exposure to the basic protein cytochrome c, AFM measurements showed an increase of the layer thickness for bare (3.1 nm) and PB-DS-coated (4.6 nm) silica, indicating substantial protein adsorption. In contrast, a very small or no increase of the layer thickness was observed for the PB and PB-DS-PB coatings, demonstrating their effectiveness against protein adsorption. The AFM results are consistent with earlier obtained CE data obtained for proteins using the same polyelectrolyte coatings.     

Ultraviolet Reflection Irradiances and Exposures in The Constructed Environment For Horizontal,Vertical and Inclined Surfaces

Ultraviolet (UV) reflection in the urban constructed environment is not well understood for topical issues such as measuring and modeling the received UV exposure due to that UV reflection for outdoor workers. Both predominantly specular and diffuse reflecting surface types have been identified and investigated for the erythemal UV reflection ratio variation due to solar zenith angle and orientation. This paper presents relationships between erythemal UV reflection ratios measured for non‐horizontal and horizontal surfaces, with predominantly specular surface types indicating stronger relationships with solar zenith angles than diffuse reflecting surfaces types. Erythemal UV exposures caused by the same reflecting surface types at three inclinations are also investigated. Non‐horizontal surfaces can increase erythemal UV exposures compared to erythemal UV exposures received from the same horizontal surface by factors of 1.07–1.46 for specific body sites and by 1.01–1.70 for averages of group body sites for zinc aluminium coated steel sheeting.     

PHI: A powerful new program for the analysis of anisotropic monomeric and exchange‐coupled polynuclear d‐ and f‐block complexes

A new program, PHI, with the ability to calculate the magnetic properties of large spin systems and complex orbitally degenerate systems, such as clusters of d‐block and f‐block ions, is presented. The program can intuitively fit experimental data from multiple sources, such as magnetic and spectroscopic data, simultaneously. PHI is extensively parallelized and can operate under the symmetric multiprocessing, single process multiple data, or GPU paradigms using a threaded, MPI or GPU model, respectively. For a given problem PHI is been shown to be almost 12 times faster than the well‐known program MAGPACK, limited only by available hardware. © 2013 Wiley Periodicals, Inc.     

A conformationally constrained fused tricyclic nisin AB-ring system mimic toward an improved pyrophosphate binder of lipid II

The bacteria-specific membrane component lipid II is essential for bacterial cell wall synthesis. A tricyclic nisin mimic was designed and synthesized in which both thioether moieties were mimicked by an alkane-bridge, as well as the introduction of a third conformational constraint consisting of a macrocyclic lactam-bridge between the N-terminus and the B-ring. The newly designed tricyclic AB-ring mimic was found to bind lipid II since it was able to inhibit nisin-induced membrane leakage in a dose-dependent manner. These results imply that the tricyclic AB-ring mimic may form a novel class of lead structures for the development of nisin-based peptide antibiotics.     

Evaluation of the Long‐term Cumulative UVA Facial Exposure of Queensland School Teachers derived for an Extended Period from the OMI Satellite Irradiance

This research presents a novel methodology for deriving the total daily broadband solar UVA (320–400 nm) received by school teachers during their working day from Ozone Monitoring Instrument (OMI) satellite solar noon UVA irradiance measurements for a Queensland subtropical site (27.5°S, 152°E). Daily UVA exposures are weighted to the anatomical human cheek (anterior infra‐orbital region) for teachers wearing and not wearing broad‐brimmed hats. The method utilizes the OMI UVA irradiance data collected daily at high temporal resolution over 2005 to 2016 to derive the total daily UVA exposure to a horizontal plane. These horizontal plane exposures are scaled by factors to take into account the timing of outdoor activity. The relationship between exposures to a horizontal plane and those to a vertical plane and the protection provided by a broad‐brimmed hat was assessed to evaluate the total daily UVA exposures to the cheek for classroom and physical education teaching staff expected to be outside at different periods of the day. The developed method enables the total daily UVA exposure to specific anatomical sites to be evaluated from the satellite solar noon irradiance at locations that do not have access to surface‐based instrumentation capable of recording in the solar UVA waveband.     

Inherent Ethyl Acetate Selectivity in a Trianglimine Molecular Solid

Ethyl acetate is an important chemical raw material and solvent. It is also a key volatile organic compound in the brewing industry and a marker for lung cancer. Materials that are highly selective toward ethyl acetate are needed for its separation and detection. Here, we report a trianglimine macrocycle ( TAMC ) that selectively adsorbs ethyl acetate by forming a solvate. Crystal structure prediction showed this to be the lowest energy solvate structure available. This solvate leaves a metastable, “templated” cavity after solvent removal. Adsorption and breakthrough experiments confirmed that TAMC has adequate adsorption kinetics to separate ethyl acetate from azeotropic mixtures with ethanol, which is a challenging and energy-intensive industrial separation.     

Enzymatic Desymmetrising Redox Reactions for the Asymmetric Synthesis of Biaryl Atropisomers

Atropisomeric biaryls carrying ortho‐hydroxymethyl and formyl groups were made enantioselectively by desymmetrisation of dialdehyde or diol substrates. The oxidation of the symmetrical diol substrates was achieved using a variant of galactose oxidase (GOase), and the reduction of the dialdehydes using a panel of ketoreductases. Either M or P enantiomers of the products could be formed, with absolute configurations assigned by time‐dependent DFT calculations of circular dichroism spectra. The differing selectivities observed with different biaryl structures offer an insight into the detailed structure of the active site of the GOase enzyme.     

Phenylalanine Ammonia Lyase Catalyzed Synthesis of Amino Acids by an MIO‐Cofactor Independent Pathway

Phenylalanine ammonia lyases (PALs) belong to a family of 4‐methylideneimidazole‐5‐one (MIO) cofactor dependent enzymes which are responsible for the conversion of L ‐phenylalanine into trans‐cinnamic acid in eukaryotic and prokaryotic organisms. Under conditions of high ammonia concentration, this deamination reaction is reversible and hence there is considerable interest in the development of PALs as biocatalysts for the enantioselective synthesis of non‐natural amino acids. Herein the discovery of a previously unobserved competing MIO‐independent reaction pathway, which proceeds in a non‐stereoselective manner and results in the generation of both L ‐ and D ‐phenylalanine derivatives, is described. The mechanism of the MIO‐independent pathway is explored through isotopic‐labeling studies and mutagenesis of key active‐site residues. The results obtained are consistent with amino acid deamination occurring by a stepwise E₁cB elimination mechanism.     

Effect of Protic Ionic Liquid and Surfactant Structure on Partitioning of Polyoxyethylene Non‐ionic Surfactants

The partitioning constants and Gibbs free energies of transfer of poly(oxyethylene) n‐alkyl ethers between dodecane and the protic ionic liquids (ILs) ethylammonium nitrate (EAN) and propylammonium nitrate (PAN) are determined. EAN and PAN have a sponge‐like nanostructure that consists of interpenetrating charged and apolar domains. This study reveals that the ILs solvate the hydrophobic and hydrophilic parts of the amphiphiles differently. The ethoxy groups are dissolved in the polar region of both ILs by means of hydrogen bonds. The environment is remarkably water‐like and, as in water, the solubility of the ethoxy groups in EAN decreases on warming, which underscores the critical role of the IL hydrogen‐bond network for solubility. In contrast, amphiphile alkyl chains are not preferentially solvated by the charged or uncharged regions of the ILs. Rather, they experience an average IL composition and, as a result, partitioning from dodecane into the IL increases as the cation alkyl chain is lengthened from ethyl to propyl, because the IL apolar volume fraction increases. Together, these results show that surfactant dissolution in ILs is related to structural compatibility between the head or tail group and the IL nanostructure. Thus, these partitioning studies reveal parameters for the effective molecular design of surfactants in ILs.     

Controlling Gas Selectivity in Molecular Porous Liquids by Tuning the Cage Window Size

Control of pore window size is the standard approach for tuning gas selectivity in porous solids. Here, we present the first example where this is translated into a molecular porous liquid formed from organic cage molecules. Reduction of the cage window size by chemical synthesis switches the selectivity from Xe‐selective to CH₄‐selective, which is understood using ¹²⁹Xe, ¹H, and pulsed‐field gradient NMR spectroscopy.