Evaporation and fission decay of 132Ce compound nuclei at Ex=122 MeV: some limitations of the statistical model

Light charged particle (LCP) emission in the evaporation residue (ER) and fusion fission (FF) channels have been studied for the 200 MeV ³²S + ¹⁰⁰Mo reaction, leading to ¹³²Ce composite nuclei at E _x =122 MeV. The main goal was to study the decay of ¹³² Ce on the basis of an extended set of observables, to get insights on the fission dynamics. The proton and alpha particle energy spectra, their multiplicities, ER-LCP angular correlations, ER and FF angular distributions, and ER and FF cross-sections were measured. The measured observables were compared with the Statistical Model (SM). Using standard parameters, the model was able to reproduce only the pre-scission multiplicities and the FF and ER cross-sections. The calculation was observed to strongly overestimate the proton and alpha particle multiplicities in the ER channel. Disagreements were also observed for the ER-LCP correlations, the LCP energy spectra and the ER angular distribution. By varying the SM input parameters over a wide range of values, it is shown that it is not possible to reproduce all the observables simultaneously with a unique set of parameters. The inadequacy of the model in reproducing the ER particle multiplicities is also observed analysing data from the literature for other systems in the A ≈ 150 and E _x ≈ 100?200 MeV region. These results indicate serious limitations about the use of the SM in extracting information on fission dynamics.     

The Synthesis and Properties of New Metal-free and Metallophthalocyanines Containing Four Diloop Macrocyclic Moieties

The synthesis and characterization of new metal-free (9) and metal-containing (Zn, Ni or Cu 10, 11, 12) derivatives of a symmetrically octasubstituted phthalocyanine derived from 21,22-dicyano-2,3,5,6,8,9,11,12,15,17,18,25,26,28-tetradecahydro[1,4,7,12] benzodioxadithiacyclotetradeceno[6,7-b][1,4,7,10,13]benzopentaoxacyclopentadecene (7), which was synthesized in a multi-step reaction sequence, have been described. The novel compouds have been characterized by a combination of elemental analysis, ¹H and ¹³C NMR, IR, UV–vis and MS spectral data.     

Non-standard coupled extensional and bending bias tests for planar pantographic lattices. Part I: numerical simulations

In dell’Isola et al. (Zeitschrift für Angewandte Math und Physik 66(6):3473–3498, 2015, Proc R Soc Lond A Math Phys Eng Sci 472(2185), 2016), the concept of pantographic sheet is proposed. The aim is to design a metamaterial showing: (i) a large range of elastic response; (ii) an extreme toughness in extensional deformation; (iii) a convenient ratio between toughness and weight. However, these required properties must coexist with non-detrimental mechanical characteristics in the presence of other kinds of imposed displacements. The aim of this paper is to prove via numerical simulations that pantographic sheets may effectively resist to coupled bending and extensional deformations. The four-parameter model introduced shows its versatility as it is able to encompass all the considered types of (large) deformations. The numerical integration scheme which we use is based on the same concepts exploited in Turco et al. (Zeitschrift für Angewandte Math und Physik 67(4):1–28, 2016): They prove that the Hencky-type discretization is very efficient also in nonlinear large deformations and large displacements regimes. In Part II of this paper, we will show that the used models are very effective to describe experimental evidence.     

New electrophoretic and chromatographic techniques for analysis of heparin and heparan sulfate

Heparin (HE) and heparan sulfated glycosaminoglycans are well-known mediators of tissue development, maintenance and functions; the activities of these polysaccharides are depending mainly on their sulfate substitutions. The HE structure is also a very important feature in antithrombotic drug development, since the antithrombin binding site is composed by sequences of a specific sulfation pattern. The analysis of disaccharide composition is then a fundamental point of all the studies regarding HE/heparan sulfate glycosaminoglycan (and thereby proteoglycan) functions. The present work describes two analytical methods to quantify the disaccharides constituting HE and heparan sulfate chains. The use of PAGE of fluorophore-labeled saccharides and HPLC coupled with a fluorescence detector allowed in one run the identification of 90-95% of HE disaccharides and 74-100% of rat kidney purified heparan sulfate. Moreover, the protocol here reported avoid the N-sulfation disaccharides degradation, which may affect N-sulfated/N-acetylated disaccharides ratio evaluation. These methods could be also very important in clinical treatments since they are useful for monitoring the availability kinetics of antithrombotic drugs, such as low-molecular-weight HEs.     

Entropic changes control the charge separation process in triads mimicking photosynthetic charge separation

Laser-induced optoacoustic spectroscopy (LIOAS) measurements with carotene-porphyrin-acceptor "supermolecular" triads (C-P-A, with A = C60, a naphthoquinone NQ, and a naphthoquinone derivative, Q) were carried out with the purpose of analyzing the thermodynamic parameters for the formation and decay of the respective long-lived charge separated state C*+-P-A*-. The novel procedure of inclusion of the benzonitrile solutions of the triads in Triton X-100 micelle nanoreactors suspended in water permitted the separation of the enthalpic and structural volume change contributions to the LIOAS signals, by performing the measurements in the range 4-20 degrees C. Contractions of 4.2, 5.7, and 4.2 mL mol-1 are concomitant with the formation of C*+-P-A*- for A = C60, Q and NQ, respectively. These contractions are mostly attributed to solvent movements and possible conformational changes upon photoinduced electron transfer, due to the attraction of the oppositely charged ends, as a consequence of the giant dipole moment developed in these compounds upon charge separation ( approximately 110 D). The estimations combining the calculated free energies and the LIOAS-derived enthalpy changes indicate that entropy changes, attributed to solvent movements, control the process of electron transfer for the three triads, especially for C-P-C60 and C-P-Q. The heat released during the decay of 1 mol of charge separated state (CS) is much smaller than the respective enthalpy content obtained from the LIOAS measurements for the CS formation. This is attributed to the production of long-lived energy storing species upon CS decay.     

Capillary zone electrophoresis of glycopeptides under controlled electroosmotic flow conditions coupled to electrospray and matrix-assisted laser desorption/ionization mass spectrometry

Defined conditions of EOF along with different pH values of the BGE were compared for the purpose of analyzing glycopetides by CZE coupled to MS (CZE-MS). Hyphenation to MS involved ESI as well as MALDI, and single-stage and multistage MS were applied. Variation of the EOF was accomplished by selecting appropriate coatings for the capillary, namely hexadimethrine bromide (HDMB) and HDMB/dextran sulfate. A high and reproducible anodic and cathodic EOF, respectively, was obtained in both approaches, allowing the detection of analytes with net positive as well as negative charge in one single run. Thus, a fast and sensitive determination of the glycopeptides in a tryptic digest of antithrombin, chosen as a test sample, was achieved. Ionization suppression effects, a phenomenon typically observed with glycopeptides in MS analysis, were minimized thanks to separation from other peptides present. The high stability of the coatings permitted the generation of mass spectra without interfering peaks originating from the coating polymers. The high EOF generated by the coatings facilitated the maintenance of a stable spray when coupling to ESI-MS, and a stable CZE current when working with a sheath flow-assisted analyte deposition onto MALDI targets, respectively. In conclusion, CZE-MS could be demonstrated as a robust complementary method to capillary RP-HPLC-MS in combination with both soft-ionization techniques, ESI and MALDI, generally, and particularly in the context of glycopeptide analysis.     

Laser desorption/ionization techniques in the characterization of high molecular weight oil fractions. Part 1: asphaltenes

The molecular weight distribution of the asphaltene fractions of two types of crude oils from two different Italian fields (samples 1 and 2) was investigated. The analytical tools used to perform these analyses were matrix assisted laser desorption ionization (MALDI) and laser desorption ionization (LDI) mass spectrometry. After observing that the use of the matrix (as well as the addition of Ag+) did not improve the quality of the data compared to that obtained in LDI conditions, all further measurements were performed with the latter technique. Operating under usual conditions of laser power and delay time, a very low resolution was observed, showing only macroscopic differences between the two samples in the molecular weight distribution of the different components. An accurate study on the possible reasons of this undesirable behavior indicates that it can originate from space charge phenomena occurring either in the ion source region or during the flight. A valid parameterization of the delay time and the laser power allowed higher quality spectra to be obtained. Surface-enhanced laser desorption ionization (SELDI) measurements were also performed using normal phase (silica) as the sample holder surface. Under these conditions, better results are obtained, proving that the sample-surface interaction is important to achieve, by means of laser irradiation, a homogeneous set of product ions. Both asphaltene samples were fractionated in five subfractions by gel-permeation chromatography (GPC) to obtain a better separation of the molecular weight distributions; the related spectra confirmed these findings. By using different approaches, relevant and reproducible differences between the asphaltene fractions of the two oil samples were observed.     

Experimental determination of in-medium cluster binding energies and Mott points in nuclear matter

In-medium binding energies and Mott points for d, t, 3He and α clusters in low-density nuclear matter have been determined at specific combinations of temperature and density in low-density nuclear matter produced in collisions of 47A MeV 40Ar and 64Zn projectiles with 112Sn and 124Sn target nuclei. The experimentally derived values of the in-medium modified binding energies are in good agreement with recent theoretical predictions based upon the implementation of Pauli blocking effects in a quantum statistical approach.