A novel route for waste water treatment: photo-assisted Fenton degradation of dye pollutants accumulated in natural polyelectrolyte microshells

The efficient accumulation of dyes in constructed natural polyelectrolyte microshells under moderate conditions, combined with the photo-assisted Fenton reagent, opens a new route for the effective elimination of dye pollutants from waste water.     

取代苯系列衍生物电子结构与毒性关系的量子化学研究

取代苯系列衍生物电子结构与毒性关系的量子化学研究苏忠民，徐贤姬，李金昶（东北师范大学化学系，长春，１３００２４）赵宝忠，盛连喜（东北师范大学环科系，长春，１３００２４）关键词：取代苯衍生物，分子毒性，ＭＮＤＯ采用量子化学半经验ＡＭＩ、ＭＮＤＯ方法，从...     

Phase separation behavior of epoxy resin modified with crosslinked rubber

Low molecular weight liquid rubber (ATBN = amine terminated butadiene acrylonitrile copolymer or CTBN = carboxyl terminated butadiene acrylonitrile copolymer)–DGEBA (diglycidyl ether of bisphenol A) blends indicated upper critical solution temperature (UCST) behavior. The phase separation behavior of the neat and crosslinked rubber (ATBN, CTBN)–epoxy blends was analyzed by a laser light scattering experiment. Lauryl peroxide (LPO) was employed to crosslink the rubber during the initial annealing stage. The onset point of the phase separation in the crosslinked ATBN–epoxy system occurred later than in the case of the neat ATBN–epoxy system. However, the onset point of the phase separation process started earlier in the case of the crosslinked CTBN–epoxy system. The domain correlation length of the crosslinked rubber-added system was smaller than that of the neat rubber-added system.     

α－Fe_2O_3微晶表面层厚度的Mossbauer谱表征

α－Ｆｅ＿２Ｏ＿３微晶表面层厚度的Ｍｏｓｓｂａｕｅｒ谱表征苏兴才，王寅生（中国科学技术大学近代化学系，合肥２３００２６）姜继森（华东师范大学化学系，上海２０００６２）关键词：表面层厚度，α－Ｆｅ＿２Ｏ＿３微晶，谱物质表面分子所处环境不同于内部分子，表...     

An electronic structure investigation of the BNO-BON-NBO system

The potential energy hypersurface of the ground triplet states of the BNO-BON-NBO system has been investigated using traditional ab initio electronic structure theory. The molecules studied have the molecular formula BON and include three linear and three angular species, and two transition states for the isomerization of an angular N-B-O to an angular B-O-N and a linear B-NO, respectively. All stationary points on the BNO-BON-NBO isomerization potential energy surface have been characterized employing UMP2, UMP4, and Gaussian-2 (G2) theory with the 6-311G(d), 6-311G(2d), and TZ2P basis sets. The isomerization for an angular N-BO to the linear B-NO has a lower energy barrier than that of the former to an angular B-ON. Energetics are presented with G2 energies. Two sets of resonance structures for both bent B-NO (boron nitrosyl) and B-ON (boron isonitrosyl) were proposed and the bonding in the two species was analyzed. For the purpose of comparison, the density functional theory based hybrid methods B3LYP/6-311G(d) and B3LYP/TZ2P have also been applied to both geometry optimization and single-point calculations. It is found that the B3LYP prediction of the nature of the linear B-O is contradictory to that made by all MPn(n = 2 and 4) calculations. The cause for this contradiction is discussed.     

四核钴羰基簇合物Co4(CO)8(μ-CO)2(μ4-PSR)2的合成和晶体结构

The title compounds Co4(CO)8(μ-CO)2 (μ4-PSR) [R=-CH3, -C2H5, -C(CH3)3,-(CHa)4CH3] were synthesized by the reaction of Co2(CO)8 with RSPCl2. They were characterized by IR, 1HNMR, elemental analysis. The crystal and molecular structure of Co4(Co)8(μ-CO)2 (μ4-PSC2H5) has been determined by single crystal diffraction method. Crystal data: monoclinic, space group P21 /c, with a=8-445(3), 6=8.562(3), c= 17.125(6)Å, β=104.26 (3)' 9 V=1200.1Å3, Z=2, Dc=1.937gcm-3. Its molecular structure contains an octahedral Co4P2 skeleton which consists of a rectangular four cobalt atoms core and the Co4 core is capped above and below by two quadruply bridging PSR ligands.     

Permeation of particle through a four-helix-bundle model channel

By using molecular dynamics simulation, the dynamic behaviors of particle permeation through a four-helix-bundle model channel are studied. The interior cavity of the four-helix-bundle provides the "routes" for particle permeation. The main structural properties of the model channel are similar to those that appear in natural four-helix-bundle proteins. It is found that the interior structure of the model channel may greatly influence the permeation process. At the narrow necks of the model channel, the particle would be trapped during the permeation. There is a threshold value for the driving force. When the driving force is larger than this threshold value, the mean first permeation time decreases sharply and tends to be saturated. Increasing the temperature of either the model channel or the particle reservoir can also facilitate the permeation. Enhancing the interaction strength between the particle and monomer on the four-helix-bundle model chain will hinder the permeation. Hence, the electrical current which is induced by the particle permeation is a function of the driving force and temperature. It is found that this current increases monotonically as the strength of the driving force or the temperature increases, but decreases as the interaction strength between the particle and monomer increases. It is also found that the larger the friction coefficient, the slower the permeation is. In addition, the multiparticle (or multi-ion) permeation process is also studied. The permeation of multiparticle is usually quicker than that of the single particle. The permeation of particle through a five-helix-bundle shows similar properties as that through a four-helix-bundle.     

Molecular films of water-miscible ionic liquids formed on glassy carbon electrodes: characterization and electrochemical applications

This letter describes the formation and possible electrochemical applications of molecular films of water-miscible imidazolium-based ionic liquids (ILs) on glassy carbon (GC) electrodes. X-ray photoelectron spectroscopy (XPS) and electrochemical results indicate that the water-miscible ILs used in this study can interact with the GC electrode and form molecular films on the electrode surface. The formed molecular films are found to possess striking electrochemical properties such as electrocatalysis toward ascorbic acid (AA) and the capability to facilitate direct electron transfer of horseradish peroxidase (HRP). This demonstration would pave the way for new electrochemical applications of water-miscible ILs and is envisaged to be useful for the investigation of the electrochemical properties of water-miscible ILs in aqueous media provided the same counteranion is used as the supporting electrolyte.     

土壤中绿黄隆残留量分析方法的研究

本文确立了土壤中绿黄隆残留量的间接气相色谱分析方法，用０．１５ｍｏｌ／Ｌ ＮａＨＣＯ３提取土样，二氯甲烷洗涤初步纯化后，在水浴上加热水解，再用二氯甲烷萃取，弗罗里硅土柱净化，最后用气相色谱－电子捕获检测器检测水解产物邻氯苯磺酰胺。土壤中添加回收率７８．５％－９０．８％，检测极限０．３ｎｇ／ｇ。     

Electrodeposition of nanocrystalline zinc from acidic sulfate solutions containing thiourea and benzalacetone as additives

Nanocrystalline zinc coatings were produced by pulse electrodeposition in acid sulfate bath containing thiourea and benzalacetone additives and characterized by X-ray diffraction and scanning electron microscopy techniques. The influence of benzalacetone concentration and pulse peak current density on the grain size and crystallographic orientation of zinc deposits was investigated. Zinc electrodeposited from additive-free solutions or with one of the two additives is not composed of nanosized crystals. The mixture additives of thiourea and benzalacetone give rise to the formation of particle-like nanocrystalline zinc with a (10ī1) random orientation. A change in peak current density from 2 to 1 A/cm² only increases the grain size from 60 to 62 nm.