Corotational rates in constitutive modeling of elastic-plastic deformation

The principal axes technique is used to develop a new hypoelastic constitutive model for an isotropic elastic solid in finite deformation. The new model is shown to produce solutions that are independent of the choice of objective stress rate. In addition, the new model is found to be equivalent to the isotropic finite elastic model; this is essential if both models describe the same material.

The new hypoelastic model is combined with an isotropic flow rule to form an elastic-plastic rate constitutive equation. Use of the principal axes technique ensures that the stress tensor is coaxial with the elastic stretch tensor and that solutions do not depend on the choice of objective stress rate. The flow rule of von Mises and a parabolic hardening law are used to provide an example of application of the new theory. A solution is obtained for the prescribed deformation of simple rectilinear shear of an isotropic elastic and isotropic elastic-plastic material.     

Kinetics and TL glow curve study of europium-activated strontium aluminate

The present paper reports the thermoluminescence (TL) glow curve of Eu²⁺-activated SrAl₂O₄ phosphor with different UV exposure times. Evaluation of kinetic parameters was done by the peak shape method. The recorded glow curve shifts towards lower temperatures with respect to increasing UV exposure time. The peaks were found at 146.76, 141.34 and 140.37 °C, respectively, for 5, 10 and 15 min of UV exposure using the heating rate of 3°C s^?1. The glow peak shows the second-order kinetics. Different kinetic parameters, i.e. trap depth, order of kinetics, activation energy, and frequency factor are also calculated. The XRD pattern of the sample is compared with reported XRD using the software match.     

Assessment of ingestion dose due to radioactivity in selected food matrices and water near Vizag,India

Activity concentrations of ²³⁸U, ²³²Th, ²²⁶Ra, ⁴⁰K and ¹³⁷Cs were measured in milk, egg, fruit and fish samples collected around a proposed site for setting up nuclear facilities, near Vishakhapatanam. The activity concentrations of the radionuclides ranged from 0.002 to 10.6, 0.002 to 2.8, 0.1 to 7.2, 3 to 110.8, 0.03 to 3 mBq g^?1 for ²³⁸U, ²³²Th, ²²⁶Ra, ⁴⁰K and ¹³⁷Cs considering analysed food matrices. Natural uranium was measured in drinking water samples and the values were below 15 ppb. The average ingestion dose was 2.07 ± 2.01, 2.81 ± 4.38, 7.66 ± 8.24, 1.28 ± 0.84 and 0.04 ± 0.05 μSv year^?1 for ²³⁸U, ²³²Th, ²²⁶Ra, ⁴⁰K and ¹³⁷Cs in milk, egg, fruit, fish and water. The ingestion dose received was the highest for milk, due to its high ingestion rate. It was observed that ²²⁶Ra is the largest contributor of measured radionuclides in this study for the different food matrices analysed due to its high dose conversion factor. The study was carried out as a part of baseline data generation for this region with which future changes in the radiological scenario can be compared.     

Review: Biodegradation of tributyltins (organotins) by marine bacteria

Many marine bacterial strains have an inherent capability to degrade toxic organotin compounds, especially tributyltins (TBTs), that enter into the environment in the form of insecticides, fungicides and antifouling paints as a result of anthropogenic and industrial activities. Significant degradation of these compounds in the ambient environment may take several years, and it is necessary to consider methods or strategies that can accelerate the degradation process. There have been few demonstrations of biological degradation of these organotin biocides exclusively in laboratory‐scale experiments. Compared with the few bench‐scale degradation processes, there are no reports of field‐scale processes for TBT bioremediation, in spite of its serious environmental threat to non‐target organisms in the aquatic environment. Implementation of field‐scale biodegradation of TBT requires inputs from biology, hydrology, geology, chemistry and civil engineering. A framework is emerging that can be adapted to develop new processes for bioremediation of toxic environmental wastes. In the case of TBT bioremediation, this framework incorporates screening and identification of natural bacterial strains, determination of optimal conditions for growth of isolates and TBT degradation, establishment of new metabolic pathways involved in TBT degradation, identification, localization and cloning of genes involved in degradation and in TBT resistance, development of suitable microbial strains using genetic manipulation techniques for practical applications and optimization of practical engineering processes for bioremediation of organotin‐contaminated sites. The present review mainly addresses the aspect of TBT biodegradation with special reference to environmental sources of TBT, chemical structure and biological activity, resistant and degrading bacterial strains, possible mechanisms of resistance and degradation and the genetic and biochemical basis of TBT degradation and resistance. It also evaluates the feasibility and potential of natural and genetically modified TBT‐degrading bacterial strains in field‐scale experiments to bioremediate TBT‐contaminated marine sites, and makes recommendations for more intensive and focused research in the area of TBT bioremediation mediated by marine bacterial strains. Copyright © 2002 John Wiley & Sons, Ltd.     

On the dipole–dipole correlation and dielectric anisotropy of some N(4-N-alkyloxy benzylidene)4′-N-alkylaniline compounds doped with silver nanoparticles

Dielectric study of the compounds N(4-n-heptyloxy benzylidene)4′-n-butylaniline and N(4-n-heptyloxy benzylidene)4′-n-hexylaniline at low frequency region (1 kHz–1 MHz) is performed using LCR meter (Agilent 4284 A). A qualitative interpretation in terms of dipole–dipole correlation for both the parallel and the perpendicular components of the dipole moment is given. Further study on the change in the dielectric permittivity and the dielectric anisotropy is made by doping the two compounds separately with dodecanethiol capped silver nanoparticles (0.25% by weight). The molecular positional ordering and relative smectic layer distance influences the change of degree (or type) of dipole–dipole pairing.     

PL Properties of Sr<Subscript>2</Subscript>CeO<Subscript>4</Subscript> With Eu<Superscript>3+</Superscript> and Dy<Superscript>3+</Superscript> for Solid State Lighting Prepared by Precipitation Method

Photoluminescence studies of pure and Dy³⁺, Eu³⁺ doped Sr₂CeO₄ compounds are presented by oxalate precipitation method for solid state lighting. The prepared samples also characterized by XRD, SEM (EDS) and FTIR spectroscopy. The pure Sr₂CeO₄ compound displays a broad band in its emission spectrum when excited with 280 nm wavelength, which peaks centered at 488 nm, which is due to the energy transfer between the molecular orbital of the ligand and charge transfer state of the Ce⁴⁺ ions. Emission spectra of Sr₂CeO₄ with different concentration of Dy³⁺ ions under near UV radiation excitation, shows that intensity of luminescence spectra is found to be affected by Dy³⁺ ions, and it increases with adding some percentages of Dy³⁺ ions. The maximum doping concentration for quenching is found to be Dy³⁺?=?0.2 mol % to Sr²⁺ions. The observed broad spectrum from 400 to 560 nm is mainly due to CT transitions in Sr₂CeO₄ matrix and some fractional contribution of transitions between ⁴F_9/2 → ⁶H_15/2 of Dy³⁺ ions. Secondly the effect of Eu³⁺ doping at the Sr²⁺ site in Sr₂CeO₄, have been studied. The results obtained by doping Eu³⁺ concentrations (0.2 mol% to 1.5 mol%), the observed excitation and emission spectra reveal excellent energy transfer between Ce⁴⁺ and Eu³⁺. The phenomena of concentration quenching are explained on the basis of electron phonon coupling and multipolar interaction. This energy transfer generates white light with a color tuning from blue to red, the tuning being dependent on the Eu³⁺ concentration. The results establish that the compound Sr₂CeO₄ with Eu³⁺?=?1 mol% is an efficient “single host lattice” for the generation of white lights under near UV-LED and blue LED irradiation. The commission internationale de I’Eclairage (CIE) coordinates were calculated by Spectrophotometric method using the spectral energy distribution of prepared phosphors.     

The importance of four-membered NHCs in stabilizing Breslow intermediates on benzoin condensation pathway

N-heterocyclic carbenes (NHCs) have been established to be effective organocatalysts for facilitating the benzoin condensation and many other reactions. These reactions involve the formation of a Breslow intermediate (BI), which exhibits umpolung chemistry. To facilitate organocatalysis, several new cyclic carbenes are being introduced, four-membered NHCs are of special interest. Whether these NHCs can exhibit catalytic influence or not, can be evaluated by exploring the potential energy surface (PES) of the benzoin condensation reaction. Quantum chemical analysis has been carried out to compare the PES of these four-membered NHCs with that of standard five-membered NHCs to explore their catalytic ability. The barrier for the first step of the reaction for the formation of BI is comparable in all the cases. But the barrier for the second step of the reaction leading to the benzoin formation from BI is estimated to be very high for the four membered NHCs. These results indicate that the probability of identifying and isolating the BI is very high in comparison to the completion of benzoin condensation reaction in the case of the four-membered NHCs.     

Heterogeneous liquid phase synthesis of 3,4-dihydropyrimidine-2(1H)-ones using aluminated mesoporous silica

Aluminated mesoporous silica (Al-SBA-15) with different amounts of Al contents were synthesized and used for the synthesis of 3,4-dihydropyrimidine-2(1H)-ones in the liquid phase, as well as under microwave conditions. The catalytic activity results showed very high conversion and yields of the products over many substituted aromatic aldehydes.     

Emerging trends in miniaturized and microfluidic electrochemical sensing platforms

Electrochemical sensing has established a strong presence in diverse areas. The conventional electrochemical sensing approach consumes large sample volumes and reagents and requires bulky potentiostat, macro-electrodes, and other equipment. The synergistic integration of electrochemical sensing systems with miniaturized or microfluidic electrochemical devices and microelectrodes in a single platform provides rapid analysis with a disposable, reusable, and cost-effective platform for multiplexed point-of-care detections. Such microdevices have created scope for using several materials as electrodes and sensing platforms by using appropriate fabrication techniques. One of the most recent advancements in miniaturized devices includes the integration of automation and Internet of Things to realize fully automated and robust electrochemical microdevices. The review summarizes the emerging trends in fabrication methods of miniaturized and microfluidic devices, their multiple applications in real-time, integration of Internet of Things, automation, identifying research gaps with strategies for bridging these gaps, future outlook, and recent approaches to intelligent electrochemical sensing.