Persistent bissilylated arenium ions

A series of bissilylated arenium ions 1 with different substitution patterns on the aryl ring have been synthesized by hydride abstraction from 2-aryl-substituted 2,6-dimethyl-2,6-disilaheptanes (2) via transient silylium ions. The arenium ions have been identified by their characteristic NMR chemical shifts, (delta(29)Si=19.1-25.6, delta(13)C(ipso) =89.0-102.4, delta(13)C(ortho)=160.9-182.0, delta(13)C(meta)=132.5-146.9, delta(13)C(para)=150.2-169.9) supported by quantum mechanical calculations of structures, energies, and magnetic properties at the B3LYP/6-311G(d,p)//B3LYP/6-31G(d) + DeltaZPVE level of theory. The calculations clearly reveal the charge dispersing and stabilizing effect of the silyl substituents in arenium ions 1. The bissilylated benzenium ion 1a is more stable than the parent benzenium ion (C(6)H(7)(+)) by 37.6 kcalmol(-1). The synthesized arenium ions 1 are stable in solution at room temperature for periods ranging from a few hours to days. This unusual stability is attributed to: 1) the thermodynamic stabilization of the arenium ion by two beta-silyl substituents and 2) the essentially non-nucleophilic reaction conditions (the use of the weakly coordinating [B(C(6)F(5))(4)](-) anion and aromatic hydrocarbons as solvents). Addition of stronger nucleophiles than aromatic hydrocarbons (for example, acetonitrile) results in desilylation of the arenium ion 1 and recovery of the 2-aryl-2,6-disilaheptane moiety.     

FeCp]+-induced hexafunctionalization of hexamethylbenzene with dendrons for the direct synthesis of redox-active iron-centered metallodendrimers

Phenol tri- and nonaallyl dendrons (3 and 7, respectively) were functionalized at the focal position to give the new triallyl dendrons 4 and 6 and the nonaallyl dendrons 11 and 13 that contain a iodoalkyl or a bromobenzyl termini. All these dendrons were used for the [FeCp]+-induced hexafunctionalization of hexamethylbenzene in [FeCp(eta6-C6Me6)][PF6] (1) under mild conditions in the presence of KOH. These reactions directly yielded the 18-allyl and 54-allyl dendrimers 9, 10, and 14 with a [FeCp(eta6-arene)]+ unit located at the dendrimer core. Cyclic voltammetry studies were recorded in THF and DMF with these metallodendrimers and compared with those of analogous dendrimers or complexes of smaller size that contain a [FeCp(eta6-arene)]+ unit at the core. The decreased rate of heterogeneous electron transfer when the dendritic size increases first disclosed by Diederich and Gross is confirmed. The variation of the redox potential of the Fe(II/I) redox system with increasing dendritic size is negligible even in a solvent of high dielectric constant such as DMF. This trend is attributed to fact that the involved "redox" orbital is buried on the metal center, well protected by the shell of alkyl chains (electron-reservoir nature), unlike in ferrocene. The chemical irreversibility increases in THF as the dendrimer size increases, due to more facile ligand substitution with THF at the 19-electron level when the chain bulk increases.     

Molecular structure and benzene ring deformation of three ethynylbenzenes from gas-phase electron diffraction and quantum chemical calculations

The molecular structures of ethynylbenzene and s-triethynylbenzene have been accurately determined by gas-phase electron diffraction and ab initio/DFT MO calculations and are compared to that of p-diethynylbenzene from a previous study [Domenicano, A.; Arcadi, A.; Ramondo, F.; Campanelli, A. R.; Portalone, G.; Schultz, G.; Hargittai, I. J. Phys. Chem. 1996, 100, 14625]. Although the equilibrium structures of the three molecules have C2v, D3h, and D2h symmetry, respectively, the corresponding average structures in the gaseous phase are best described by nonplanar models of Cs, C3v, and C2v symmetry, respectively. The lowering of symmetry is due to the large-amplitude motions of the substituents out of the plane of the benzene ring. The use of nonplanar models in the electron diffraction analysis yields ring angles consistent with those from MO calculations. The molecular structure of ethynylbenzene reported from microwave spectroscopy studies is shown to be inaccurate in the ipso region of the benzene ring. The variations of the ring C-C bonds and C-C-C angles in p-diethynylbenzene and s-triethynylbenzene are well interpreted as arising from the superposition of independent effects from each substituent. In particular, experiments and calculations consistently show that the mean length of the ring C-C bonds increases by about 0.002 A per ethynyl group. MO calculations at different levels of theory indicate that though the length of the C[triple bond]C bond of the ethynyl group is unaffected by the pattern of substitution, the C(ipso)-C(ethynyl) bonds in p-diethynylbenzene are 0.001-0.002 A shorter than the corresponding bonds in ethynylbenzene and s-triethynylbenzene. This small effect is attributed to conjugation of the two substituents through the benzene ring. Comparison of experimental and MO results shows that the differences between the lengths of the C(ipso)-C(ethynyl) and C(ipso)-C(ortho) bonds in the three molecules, 0.023-0.027 A, are correctly computed at the MP2 and B3LYP levels of theory but are overestimated by a factor of 2 when calculated at the HF level.     

Volumetric Properties of Binary Mixtures of Isomeric Butanols and C8 Solvents at 298.15 K

Excess molar volumes, V _m ^E, over the whole composition range for binary mixtures of 1-butanol, 2-butanol, and 2-methyl-2-propanol + 1-octanol, or 2-octanol, or di-n-butyl ether, or n-hexylacetate were determined at 298.15 K from density measurements carried out with a vibrating-tube densimeter. Small V _m ^E values, both positive and negative, are displayed by mixtures containing 1- or 2-octanol, whereas positive and larger values are always found for mixtures containing dibutyl ether and hexylacetate. These results can be justified in terms of H-bonding interactions and/or steric hindrance due to the branched alkyl chains. Partial molar volumes at infinite dilution of the isomeric butanols in the C8 compounds were also calculated from the apparent molar volumes in dilute solution. The solute-solvent interactions and the effects of the local organisation of the solvent around the butanol molecules were discussed using the void and cavity volumes as different estimates of the intrinsic volume of the molecules. The volumetric behavior of butanols seems to be determined by the solute-solvent interactions rather than packaging effects.     

Static secondary ion mass spectrometry (S-SIMS) for the characterization of surface components in mineral particulates

The feasibility of static secondary ion mass spectrometry (S-SIMS) for the detection of molecule specific information from complex materials, such as natural clay and soil samples, has been investigated. Ion trap (IT), as well as triple quadrupole (TQ) instruments, have been used for mass analysis. Secondary ion images have been acquired using time-of-flight (TOF) S-SIMS. The generation of molecular adduct ions from thin and thick layers on the mineral substrates has been investigated using KBr as a simple model system. Results show that molecular adducts of KBr can be indeed detected from the spiked materials. However, the concentrations of the spiking solutions have to be significantly larger than expected from the surface area measured by gas adsorption techniques. In addition imaging analysis has evidenced that the detection of adduct ions in the mass spectra directly relates to the presence of local micro-crystallites.     

Optically pure trans-2,3-disubstituted N-sulfinyl aziridines. Regio- and stereoselective opening mediated by the sulfinyl group

A new entry to optically pure trans-2,3-disubstituted N-sulfinyl aziridines starting from 1,2-aminosulfides, involving formation of a sulfonium salt intermediate followed by intramolecular nucleophilic attack by the sulfinamide nitrogen atom, is reported. The regio- and stereoselective opening of the aziridine ring can be achieved by anchimeric assistance of the sulfinyl group.     

Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.     

One-bond 1J(15N,H) coupling constants at sp2-hybridized nitrogen of Schiff bases,enaminones and similar compounds: A theoretical study

¹J(¹⁵N,H) coupling constants for enaminones and NH-forms of intramolecularly hydrogen-bonded Schiff bases as model compounds for sp²-hybridized nitrogen atoms are evaluated using density functional theory (DFT) to find the optimal functionals and basis sets. Ammonia is used as a test molecule and its one-bond coupling constant is compared with experiment. A methylamine Schiff base of a truncated molecule of gossypol is used for checking the performance of selected B3LYP, O3LYP, PBE, BHandH, and APFD density functionals and standard, modified, and dedicated basis sets for coupling constants. Both in vacuum and in chloroform, modeled by the simple continuum model of solvent, the modified basis sets predict significantly better the ¹J(¹⁵N,H) value in ammonia and in the methylamine Schiff base of a truncated molecule of gossypol than the standard basis sets. This procure is then used on a broad set of intramolecularly hydrogen-bonded molecules, and a good correlation between calculated and experimental one-bond NH coupling constants is obtained. The ¹J(¹⁵N,H) couplings are slightly overestimated. The calculated data show for hydrogen-bonded NH interatomic distances that the calculated values depend on the NH bond lengths. The shorter the bond lengths, the larger the ¹J(¹⁵N,H). A useful correlation between ¹J(¹⁵N,H) and NH bond length is derived that enables realistic predictions of one-bond NH coupling constants. The calculations reproduce experimentally observed trends for the studied molecules.     

Fermentation Kinetics for Xylitol Production by a Pichia stipitis d-Xylulokinase Mutant Previously Grown in Spent Sulfite Liquor

Spent sulfite pulping liquor (SSL) contains lignin, which is present as lignosulfonate, and hemicelluloses that are present as hydrolyzed carbohydrates. To reduce the biological oxygen demand of SSL associated with dissolved sugars, we studied the capacity of Pichia stipitis FPL-YS30 (xyl3Δ) to convert these sugars into useful products. FPL-YS30 produces a negligible amount of ethanol while converting xylose into xylitol. This work describes the xylose fermentation kinetics of yeast strain P.stipitis FPL-YS30. Yeast was grown in rich medium supplemented with different carbon sources: glucose, xylose, or ammonia-base SSL. The SSL and glucose-acclimatized cells showed similar maximum specific growth rates (0.146 h⁻¹). The highest xylose consumption at the beginning of the fermentation process occurred using cells precultivated in xylose, which showed relatively high specific activity of glucose-6-phosphate dehydrogenase (EC 1.1.1.49). However, the maximum specific rates of xylose consumption (0.19 g_xylose/g_cel h) and xylitol production (0.059 g_xylitol/g_cel h) were obtained with cells acclimatized in glucose, in which the ratio between xylose reductase (EC 1.1.1.21) and xylitol dehydrogenase (EC 1.1.1.9) was kept at higher level (0.82). In this case, xylitol production (31.6 g/l) was 19 and 8% higher than in SSL and xylose-acclimatized cells, respectively. Maximum glycerol (6.26 g/l) and arabitol (0.206 g/l) production were obtained using SSL and xylose-acclimatized cells, respectively. The medium composition used for the yeast precultivation directly reflected their xylose fermentation performance. The SSL could be used as a carbon source for cell production. However, the inoculum condition to obtain a high cell concentration in SSL needs to be optimized. Prepared for 29th Symposium on Biotechnology for Fuels and Chemicals.     

Synthesis and direct interactions of silver colloidal nanoparticles with pollutant gases

Silver nanoparticles (NPs) were synthesized in organic solvents. Spontaneous reduction of silver salts takes place in N,N′-dimethyl formamide (DMF) and dimethyl sulfoxide (DMSO) at room temperature. The formed colloids are not stable without a stabilizing agent, hence rarely used, and inexpensive organic molecules (β-cyclodextrin and cholic acid) were used as surface modifiers in DMF. The stabilization was successful; the Ag NPs remained stable for more than 3 months. Additionally, Ag NPs were prepared using Ag-2-ethylhexanoate and Na-citrate as capping agent in DMSO. The resulting NPs are stable, of 4.4 nm average size, and at the same time reactive for catalytic purposes. The interaction of Ag NPs with pollutant atmospheric gases (NO and SO₂) was studied. UV–visible spectra show the oxidation of silver and the very efficient reduction of NO at room temperature. SO₂ molecules are adsorbed on the NPs surface, causing their aggregation and precipitation.