Optical and Electrical Properties of Polymerizing Plasmas and Their Correlation with DLC Film Properties

Diamond-like carbon (DLC) films were grown from radiofrequency plasmas of acetylene-argon mixtures, at different excitation powers, P. The effects of this parameter on the plasma potential, electron density, electron temperature, and plasma activity were investigated using a Langmuir probe. The mean electron temperature increased from about 0.5 to about 7.0 eV while the mean electron density decreased from about 1.2 × 10⁹ to about 0.2 × 10⁹ cm^–3 as P was increased from 25 to 150 W. Both the plasma potential and the plasma activity were found to increase with increasing P. Through actinometric optical emission spectrometry, the relative concentrations of CH, [CH], and H, [H], in the discharge were mapped as a function of the applied power. A rise in [H] and a fall in [CH] with increasing P were observed and are discussed in relation to the plasma characteristics and the subimplantation model. The optical properties of the films were calculated from ultraviolet-visible spectroscopic data; the surface resistivity was measured by the two-point probe method. The optical gap, E _G, and the surface resistivity, _s, fall with increasing P. E _G and _s are in the ranges of about 2.0–1.3 eV and 10¹⁴–10¹⁶ /, respectively. The plasma power also influences the film self-bias, V _b, via a linear dependence, and the effect of V _b on ion bombardment during growth is addressed together with variation in the relative densities of sp² and sp³ bonds in the films as determined by Raman spectroscopy.     

Chromium‐Mediated Dearomatization: Application to the Synthesis of Racemic 15‐Acetoxytubipofuran and Asymmetric Synthesis of Both Enantiomers

An efficient dearomatization process of [Cr(arene)(CO)₃] complexes initiated by a nucleophilic acetaldehyde equivalent is detailed. It generates in a one‐pot reaction three C? C bonds and two stereogenic centers. This process allowed a rapid assembly of a cis‐decalin ring system incorporating a homoannular diene unit in just two steps starting from aromatic precursors (Scheme 2). The method was applied to the total synthesis of the eudesmane‐type marine furanosesquiterpene (±)‐15‐acetoxytubipofuran ( 2 ). Two routes were successfully used to synthesize the γ‐lactone precursor of the furan ring. The key step in the first approach was a Pd‐catalyzed allylic substitution (Scheme 3), while in the second approach, an Eschenmoser–Claisen rearrangement was highly successful (Scheme 4). The Pd‐catalyzed allylic substitution could be directed to give either the (normal) product with overall retention as major diastereoisomer or the unusual product with inversion of configuration (see Table). For the synthesis of the (?)‐enantiomer (R,R)‐ 2 of 15‐acetoxytubipofuran, an enantioselective dearomatization in the presence of a chiral diether ligand was implemented (Scheme 7), while the (+)‐enantiomer (S,S)‐ 2 was obtained via a diastereoselective dearomatization of an arene‐bound chiral imine auxiliary (Scheme 8). Chiroptical data suggest that a revision of the previously assigned absolute configuration of the natural product is required.     

Solid State NMR and TG/MS Study on the Transformation of Methyl Groups During Pyrolysis of Preceramic Precursors to SiOC Glasses

The sol-gel method was used to prepare two different starting gels containing SiCH₃-groups for the preparation of SiOC ceramics. To understand the role of Si—H bonds in the incorporation of carbon into the SiOC network, gels prepared from a 1:2 mixture of triethoxysilane and methyldiethoxysilane (T^HD^H2) and solely methyltriethoxysilane (T^Me) were investigated. Thermogravimetric analysis coupled with mass spectroscopy (TG-MS) in inert atmosphere was performed to attain an insight into the decomposition reactions involved during gel-glass transformation. Samples calcined at different temperatures up to 1000°C were characterized by ²⁹Si and ¹³C magic angle spinning nuclear magnetic resonance (MAS-NMR) spectroscopy. The presence of SiH groups in the starting gel allows an efficient conversion of Si—CH₃ groups into CSi₄ sites at lower temperatures. As a result, despite a much lower amount of carbon in the starting T^HD^H2 gel (C/Si = 0.33) compared to the T^Me gel (C/Si = 1), the amount of carbon inserted into the SiOC network of both glasses is equivalent, but the T^Me sample contains the 10 fold amount of free carbon.     

Potential energy surface and rovibrational states of the ground Ar-HI complex

A potential energy surface for the ground electronic state of the Ar-HI van der Waals complex is calculated at the coupled-cluster with single and double excitations and a noniterative perturbation treatment of triple excitations [CCSD(T)] level of theory. Calculations are performed using for the iodine atom a correlation consistent triple-zeta valence basis set in conjunction with large-core Stuttgart-Dresden-Bonn relativistic pseudopotential, whereas specific augmented correlation consistent basis sets are employed for the H and Ar atoms supplemented with an additional set of bond functions. In agreement with previous studies, the equilibrium structure is found to be linear Ar-I-H, with a well depth of 205.38 cm(-1). Another two secondary minima are also predicted at a linear and bent Ar-H-I configurations with well depths of 153.57 and 151.57 cm(-1), respectively. The parametrized CCSD(T) potential is used to calculate rovibrational bound states of Ar-HI/Ar-DI complexes, and the vibrationally averaged structures of the different isomers are determined. Spectroscopic constants are also computed from the CCSD(T) surface and their comparison with available experimental data demonstrates the quality of the present surface in the corresponding configuration regions.     

New organocatalysts derived from tartaric and glyceric acids for direct aldol reactions

The synthesis of several new pyrrolidine based asymmetric organocatalysts derived from tartaric, glyceric acids and a pyrrolidine moiety is described with a study of their application in the development of an enantioselective aldol protocol. The influence of different proton donor groups, such as a primary hydroxyl or a carboxylic acid group, or their absence, on the efficiency of the organocatalyst was studied. The configuration of the tartrate derived catalysts and the presence of the rigid butane-2,3-diacetal were found to have a strong influence on the stereoselective outcome of the aldol reaction.     

A simple method to prepare high surface area activated carbon from carboxyl methyl cellulose by low temperature physical activation

Activated carbon with high surface area was prepared from sodium salt of carboxyl methyl cellulose by physical activation at 400 °C followed by treatment in boiling water. The carbon was characterized by XRD, SEM, EPR, TG, IR, surface areas and porosity measurements. The carbon showed alkaline reaction in aqueous solution. It showed high surface area and pore volume in comparison to two commercially available carbons.     

The impact of time on the heat resistance of self-compacting high-performance concrete incorporated with recycled martials

The influence of time on the mechanical behavior of concrete after exposure to elevated temperatures has been studied. Twenty-one self-compacting high-performance concrete mixtures with different incorporation amounts of coarse recycled concrete aggregate (RCA) and three unprocessed waste powder materials have been tested at age of 270 days for residual compressive and flexural strength after exposure to fire. The results have been compared to the results for the same concrete, which have been studied at age of 90 days. A new parameter has been introduced for comparing the responses of concrete to elevated temperatures at different ages; this parameter was the “heat resistance” which expresses the total area under the curve of the relative residual strength (compressive or flexural) after exposing to six temperature degrees (20, 150, 300, 500, 600, and 800 °C). The results showed that the age of concrete has an influence on the response of concrete to elevated temperatures. The heat resistance of compressive strength enhanced with age but the concrete behaved with a tendency different to that at the age of 90 days. The heat resistance of flexural strength has not been affected or slightly decreased but not with more than 10% to that at the age of 90 days. The used waste powder materials were unprocessed waste fly ash, waste cellular concrete powder and waste perlite powder; they proved that using any of them up to 15% as a replacement for cement with 0% or 25% of RCA enhanced the concrete resistance for the fire with time. The main two reasons for changing of residual strength with the time were the changing of water content and the proceeding of hydration of the binder. In general, long ages testing properties of concrete simulate the real behavior of concrete structures accurately.