A comparison between different optimization criteria for tuned mass dampers design

Tuned mass sampers (TMDs) are widely used strategies for vibration control in many engineering applications, so that many TMD optimization criteria have been proposed till now. However, they normally consider only TMD stiffness and damping as design variables and assume that the tuned mass is a pre-selected value. In this work a more complete approach is proposed and then also TMD mass ratio is optimized. A standard single degree of freedom system is investigated to evaluate TMD protection efficiency in case of excitation at the support. More precisely, this model is used to develop two different optimizations criteria which minimize the main system displacement or the inertial acceleration. Different environmental conditions described by various characterizations of the input, here modelled by a stationary filtered stochastic process, are considered. Results show that all solutions obtained considering also the mass of the TMD as design variable are more efficient if compared with those obtained without it. However, in many cases these solutions are inappropriate because the optimal TMD mass is greater than real admissible values in practical technical applications for civil and mechanical engineering. Anyway, one can deduce that there are some interesting indications for applications in some actual contexts. In fact, the results show that there are some ranges of environmental parameters ranges where results attained by the displacement criterion are compatible with real applications requiring some percent of main system mass. Finally, the present research gives promising indications for complete TMD optimization application in emerging technical contexts, as micromechanical devices and nano resonant beams.     

Extensive browsing by a conventional grazer? Stable carbon isotope analysis reveals extraordinary dietary flexibility among Sanga cattle of North Central Namibia

Intraspecies dietary flexibility, such as variable consumption of graze vs. browse in herbivores, has received scant attention on a spatial scale despite growing evidence of substantial variability within and among populations, especially in bovids. Here, we report on extraordinary differences in cattle diet among two communal pasture areas across seasons in northern Namibia: King Nehale (KN, open grassland) and Okongo (OK, dense woodland). Percentage C₃ browse and C₄ grass consumption was determined from δ¹³C values of dung samples, using a Bayesian stable-isotope mixing model (SIAR – stable isotope analysis in R). During the wet and early dry season, KN cattle consumed 11 and 19% browse, respectively, and the OK cattle consumed 84% browse. At the end of the dry season, the browse intake of KN cattle increased to 33% while that of OK cattle decreased to 55%. Vegetation structure influenced the graze/browse consumption strongly in both areas. A better understanding of this extraordinary dietary flexibility is imperative as anthropogenically driven habitat change is projected to lead to the extinction of perceived grazing specialists.     

Automatic segmentation of cerebral white matter hyperintensities using only 3D FLAIR images

Magnetic Resonance (MR) white matter hyperintensities have been shown to predict an increased risk of developing cognitive decline. However, their actual role in the conversion to dementia is still not fully understood. Automatic segmentation methods can help in the screening and monitoring of Mild Cognitive Impairment patients who take part in large population-based studies. Most existing segmentation approaches use multimodal MR images. However, multiple acquisitions represent a limitation in terms of both patient comfort and computational complexity of the algorithms. In this work, we propose an automatic lesion segmentation method that uses only three-dimensional fluid-attenuation inversion recovery (FLAIR) images. We use a modified context-sensitive Gaussian mixture model to determine voxel class probabilities, followed by correction of FLAIR artifacts. We evaluate the method against the manual segmentation performed by an experienced neuroradiologist and compare the results with other unimodal segmentation approaches. Finally, we apply our method to the segmentation of multiple sclerosis lesions by using a publicly available benchmark dataset. Results show a similar performance to other state-of-the-art multimodal methods, as well as to the human rater.     

Mathematics in chemistry: indeterminate forms and their meaning

The mathematical language and its tools are complementary to the formalism in chemistry, in particular at an advanced level. It is thus crucial, for its understanding, that students acquire a solid knowledge in Calculus and that they know how to apply it. The frequent occurrence of indeterminate forms in multiple areas, particularly in Physical Chemistry, justifies the need to properly understand the limiting process in such cases. This article emphasizes the importance of the L’Hôpital's rule as a practical tool, although often neglected, to obtain the more common indeterminate limits, through the use of some specific examples as the radioactive decay, spectrophotometric error, Planck's radiation law, second-order kinetics, or consecutive reactions.     

Development of Chitosan-Based Surfaces to Prevent Single- and Dual-Species Biofilms of Staphylococcus aureus and Pseudomonas aeruginosa

Implantable medical devices (IMDs) are susceptible to microbial adhesion and biofilm formation, which lead to several clinical complications, including the occurrence of implant-associated infections. Polylactic acid (PLA) and its composites are currently used for the construction of IMDs. In addition, chitosan (CS) is a natural polymer that has been widely used in the medical field due to its antimicrobial and antibiofilm properties, which can be dependent on molecular weight (Mw). The present study aims to evaluate the performance of CS-based surfaces of different Mw to inhibit bacterial biofilm formation. For this purpose, CS-based surfaces were produced by dip-coating and the presence of CS and its derivatives onto PLA films, as well surface homogeneity were confirmed by contact angle measurements, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The antimicrobial activity of the functionalized surfaces was evaluated against single- and dual-species biofilms of Staphylococcus aureus and Pseudomonas aeruginosa. Chitosan-based surfaces were able to inhibit the development of single- and dual-species biofilms by reducing the number of total, viable, culturable, and viable but nonculturable cells up to 79%, 90%, 81%, and 96%, respectively, being their activity dependent on chitosan Mw. The effect of CS-based surfaces on the inhibition of biofilm formation was corroborated by biofilm structure analysis using confocal laser scanning microscopy (CLSM), which revealed a decrease in the biovolume and thickness of the biofilm formed on CS-based surfaces compared to PLA. Overall, these results support the potential of low Mw CS for coating polymeric devices such as IMDs where the two bacteria tested are common colonizers and reduce their biofilm formation.     

CDS volatility: the key signal of credit quality

This paper investigates the role of CDS volatility in providing information concerning the credit quality of a company. In Castellano and D’Ecclesia (J. Financ. Decis. Mak. 2:27, 2011) a first analysis of how CDS quotes respond to rating announcements is provided and it showed that market participants do not rely much on Rating Agencies, especially during periods characterized by very high volatility, i.e. during a financial crisis. Here, a more accurate analysis of the CDS’s ability to provide timely information on the creditworthiness of reference entities is performed, estimating the volatility of CDS quotes by using Exponential GARCH(1,1) models. The event study methodology is applied to a sample of CDS quotes for US and European markets, over the period 2004–2009. Results provide an accurate understanding of market behavior in the presence of news released by Rating Agencies. Overall, market participants seem to provide timely reactions around the event date and we show that the key element of signaling is represented by the changing volatility in CDS quotes, before and after the rating event.     

Interfacing Formate Dehydrogenase with Metal Oxides for the Reversible Electrocatalysis and Solar‐Driven Reduction of Carbon Dioxide

The integration of enzymes with synthetic materials allows efficient electrocatalysis and production of solar fuels. Here, we couple formate dehydrogenase ( FDH ) from Desulfovibrio vulgaris Hildenborough (DvH) to metal oxides for catalytic CO₂ reduction and report an in‐depth study of the resulting enzyme–material interface. Protein film voltammetry (PFV) demonstrates the stable binding of FDH on metal‐oxide electrodes and reveals the reversible and selective reduction of CO₂ to formate. Quartz crystal microbalance (QCM) and attenuated total reflection infrared (ATR‐IR) spectroscopy confirm a high binding affinity for FDH to the TiO₂ surface. Adsorption of FDH on dye‐sensitized TiO₂ allows for visible‐light‐driven CO₂ reduction to formate in the absence of a soluble redox mediator with a turnover frequency (TOF) of 11±1 s^?1. The strong coupling of the enzyme to the semiconductor gives rise to a new benchmark in the selective photoreduction of aqueous CO₂ to formate.     

Quantum effects on the stability of the He5I2 van der Waals conformers

We present 15-dimensional quantum multiconfiguration time-dependent Hartree calculations of the vibrational levels of the He₅I₂ van der Waals (vdW) complex employing an ab initio-based potential energy surface (PES). The energies and spatial features of such bound structures are analyzed, providing predictions on the structures and relative stabilities of its three lowest isomers. We found that the most stable isomer corresponds to all five He atoms encircling the I₂ molecule, indicating that in this case the anharmonic quantum effects do not stabilize the isomers involving a He atom in a linear configuration as reported previously for the smaller He_NI₂ systems. Such finding provides information on the overall structuring of the finite-size-solvent systems, highlighting the intriguing interplay between weak intermolecular interactions and quantum effects. © 2019 Wiley Periodicals, Inc.     

Photoelectrochemical platform for sensing propyl gallate in edible oil samples based on CdTe quantum dots and poly(D-glucosamine)

Journal of Solid State Electrochemistry - This paper reports the development of a photoelectrochemical platform based on indium tin oxide (ITO) electrode modified with carboxyl-functionalized...     

Accurate determination of elastic parameters for multicomponent membranes

Heterogeneities in the cell membrane due to coexisting lipid phases have been conjectured to play a major functional role in cell signaling and membrane trafficking. Thereby the material properties of multiphase systems, such as the line tension and the bending moduli, are crucially involved in the kinetics and the asymptotic behavior of phase separation. In this Letter we present a combined analytical and experimental approach to determine the properties of phase-separated vesicle systems. First we develop an analytical model for the vesicle shape of weakly budded biphasic vesicles. Subsequently experimental data on vesicle shape and membrane fluctuations are taken and compared to the model. The parameters obtained set limits for the size and stability of nanodomains in the plasma membrane of living cells.