Removal of iron (III) oxide particles from a quartz plate by liquid flow

The detachment of submicron particles of iron (III) oxide from a quartz plate in aqueous solutions was investigated by using a well-defined flow of electro-osmosis in comparison with the ordinary flow of water without electrokinetic effect. A rectangular quartz cell was used for removal experiments. Zeta potentials of the particles and the plate were determined by electrophoresis and electro-osmosis, respectively. When the iron (III) oxide particles adhering to the quartz plate were removed by the electro-osmotic flow or the ordinary (Poiseuille) flow, the removal efficiency increased with increasing hydrodynamic force. The removal efficiency by electro-osmotic flow was almost the same as that by ordinary flow under the condition of the same magnitude of applied hydrodynamic force. The values of volume flow rate for the removal efficiency of 0.5 for the electro-osmotic flow was extremely small compared with that for the ordinary flow, showing the effectiveness of particle removal by electrokinetic effect of electro-osmosis. The kinetic analysis of the particle removal process showed that it was characterized by two different rate constants, the rate constant of the rapid process and that of the slow process. The rate constant of slow process increased with increasing electro-osmotic velocity. This shows that the electro-osmotic flow acts as a mechanical force to overcome the energy barrier in the removal process. The rate constant increased with increasing surfactant concentration and this trend became more noticeable as electro-osmotic velocity increased. It is concluded from this result that the effect of surfactant on particle removal is enhanced by the mechanical force in removal processes.     

Experimental determination of energy barrier to particle detachment

The estimation of energy barrier to detachment of particles from a substrate was carried out. Detachment processes of 4 m polyethylene particles from a quartz wall under the gravitational force in aqueous solutions were investigated by a direct observation technique. The magnitude of energy barriers was experimentally determined by the temperature dependence of the rate constant of detachment and was compared with that estimated theoretically from the superposition of electrostatic and London—van der Waals energies calculated using the experimental electrokinetic potentials and Hamaker constants, respectivley. Both were in fairly good agreement.     

Mechanism of thermal decomposition of peroxide radicals formed in polytetrafluoroethylene by γ-ray irradiation

Thermal decomposition of polymer peroxide radicals formed in γ-irradiated polytetrafluoroethylene, ～CF₂CF(OO·)CF₂～ (radical I) and ～CF₂CF₂(OO～) (radical II), was studied by mass spectral analysis of the gas evolved in comparison with their photolysis with ultraviolet light. In the thermal decomposition of radicals I and II, CO₂ was the most abundant component, with smaller amount of CO, CF₂O, and gases present. In the photolysis, CO instead of CO₂ was the most abundant in the case of radical I, while in the case of radical II, CO₂ was again the main product. When a labeled polymer peroxide radical, ～CF₂CF(¹⁸O-¹⁸O·)CF₂～, was treated with heat or ultraviolet light, C¹⁸O¹⁶O was detected as a main component. In the treatment with ultraviolet light, a large amount of C¹⁸O comparable to that of C¹⁸O¹⁶O was also obtained. The mechanism of main-chain scission of radicals I and II is discussed.     

Synthesis of 1‐acyl‐2‐oxo‐3‐pyrrolidinecarbonitriles by the reaction of 2‐acylamino‐4,5‐dihydro‐3‐furancarbonitriles with sodium iodide

The reaction of 2‐acylamino‐4,5‐dihydro‐3‐furancarbonitriles 1 with sodium iodide in N,N‐dimethyl‐formamide gave the corresponding 1‐acyl‐2‐oxo‐3‐pyrrolidinecarbonitriles 2 in good yields. Successive treatment of 1 with titanium(IV) chloride and potassium carbonate resulted in the formation of N‐acyl‐1‐cyanocyclopropanecarboxamides 4 . The same compounds 2 were also obtained by treatment of 4 with sodium iodide. The starting compounds 1 were synthesized by the reaction of 2‐amino‐4,5‐dihydro‐3‐furan‐carbonitrile with acyl chlorides in pyridine.     

Thermal decomposition temperatures of metal sulfates

The thermal decomposition of sixteen metal sulfates was studied by thermogravimetry at heating rates of 2 and 5°C min^?1 in flowing air and high-purity nitrogen. Their decomposition behaviors, especially the initial decomposition temperatures, were examined with relation to the thermodynamic functions for decomposition. Of the factors possibly influencing the decomposition temperature, the equilibrium SO₃ pressures over the sulfates were evaluated: the equilibrium pressures at the initial temperatures for sulfates of metals, of which the oxidation state was unchanged during decomposition, were nearly equal to 1×10^?4 atm at 2°C min^?1 in flowing nitrogen.     

Titania supported copper catalysts for methanol synthesis from carbon dioxide

The effect of co-catalyst (ZnO or ZrO₂) has been tested for hydrogenation of CO₂ on CuO/TiO₂ and CuO/Al₂O₃. CuO−ZnO/TiO₂ catalyst showed the highest activity for methanol synthesis. Kinetic parameters were also determined.     

Kinetics of adsorption and desorption of sodium alkyl sulfates to and from nylon particles

The desorption rate of surfactant ions from nylon particles was investigated at the concentrations below the critical micelle concentration by applying the stopped-flow method. A mixing cell of stopped-flow spectrophotometer was modified with platinum electrodes for electric conductivity detection. The change in electric conductivity with time in the desorption process was monitored by a memory-recorder system. The surfactants used were sodium decyl, sodium dodecyl, sodium tetradecyl, and sodium hexadecyl sulfates. The desorption rate was independent of the surfactant concentration and the rate constants were obtained by applying the first-order reaction scheme. The adsorption rate constants were estimated from the experimental desorption rate constants and equilibrium constants assuming the second-order kinetics. The desorption rate constants were determined to be 1–6 sec^–1 and the adsorption rate constants to be 2–8×10⁴ mol^–1 dm³ sec^–1; the former decreased and the latter increased with increasing number of carbon atoms in alkyl chain of the surfactants.     

Control of chemical reaction involving dissolved oxygen using magnetic field gradient

This study investigated the control of dissolved oxygen concentration using magnetic forces from gradient magnetic fields near a Nd–Fe–B permanent magnet. Maximum values of magnetic flux density and the product of the magnetic flux density and its gradient were 0.63 T and 44 T²/m, respectively. The magnet was placed under a Petri dish filled with 15 ml of 10% ammonia water. The Petri dish had a copper sheet in the center. Absorbance of tetraamminecopper(II) complex produced by the reaction in oxygen was measured using a spectrophotometer to observe oxygen concentration. Results showed that the magnetic field quantitatively enhanced tetraamminecopper(II) complex production. Moreover, remarkable enhancement of the copper complex production occurred in the magnetic field at less than 2 mm depth. The calculated magnetic force increase near the magnet surface supports this result. These results show that greater enhancement of the reaction rate occurs when the stronger magnetic force acts on oxygen molecules.     

Measurements of the desorption rate of sodium dodecyl sulfate from nylon particles by the stopped-flow method

The desorption kinetics of sodium dodecyl sulfate (SDS) from nylon particles was investigated by applying the stopped-flow technique. A stopped-flow spectrophotometer commercially available was modified in order to study the desorption kinetics of ionic surfactants from solid surfaces in aqueous solutions. The modification provided a mixing cell with platinum electrodes for electric conductivity detection. Nylon particle suspensions containing various concentrations of SDS were rapidly diluted with distilled water by using the modified mixing apparatus. The changes in specific electric conductivity with time were monitored by a memory-recorder system. It was found that the rate constant in the early stage of desorption could be accurately determined by the modified stopped-flow method.     

The detachment of nylon particles from quartz plate by electro-osmotic flow

The direct application of electrokinetic phenomena to detergency was investigated. Experiments were carried out to remove particles from substrate by electro-osmosis. A model system which consisted of spherical nylon particles of 5m in mean diameter, a quartz plate, and wash liquid were used in analyzing the kinetic process of particle removal from substrate. When an electric field was applied to the system, electro-osmotic flow took place, and hence the particles were removed from the quartz surface. The -potentials of nylon particles and quartz plate were measured by electrophoresis. The rate constants of removal,, were obtained from the changes with time in the ratio of particle residue by applying the first-order reaction scheme. The value of increased with increasing electric field and with increasing concentration of surfactant. The total force of interaction between particle and plate was calculated on the basis of heterocoagulation theory of colloid stability.It was found from results thus obtained that the hydrodynamic force due to the electro-osmotic flow worked effectively as a mechanical force on the removal process and the adhesion force of particle to substrate reduced by adding surfactant.