Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior

The isothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) (PBT) in binary blends with poly(ε-caprolactone) (PCL) was investigated as a function of PCL molecular mass by differential scanning calorimetry and optical microscopy. The components are miscible in the melt when oligomeric PCL (M_w = 1250) is blended with PBT, whereas only partial miscibility was found in mixtures with higher molecular mass (M_w = 10,000 and 50,000). The equilibrium melting point of PBT in the homopolymer and in blends with PCL was determined through a non-linear extrapolation of the T_m = f(T_c) curve. The PBT spherulitic growth rate and bulk crystallization rate were found to increase with respect to plain PBT in blends with PCL1250 and PCL10000, whereas addition of PCL50000 causes a reduction of PBT solidification rate. The crystallization induction times were determined by differential scanning calorimetry for all the mixtures through a blank subtraction procedure that allows precise estimation of the crystallization kinetics of fast crystallizing polymers. The results have been discussed on the basis of the Hoffman-Lauritzen crystallization theory and considerations on both the transport of chains towards the crystalline growth front and the energy barrier for the formation of critical nuclei in miscible and partially miscible PBT/PCL mixtures are widely debated.     

Charge-state and charge-continuum models in electrophoresis and isoelectric focusing of genetic variants

A model which combines the charge-state and charge-continuum models is considered in terms of the pH at which the electrophoretic analysis is made. "Unit" charge changes are obtained when the mutated charged group is at least 2 pH units apart from the pI of the protein. "Fractional" charge changes are found when the differences between the pK of the mutated charged group and the pI of the protein becomes progressively smaller, or when the pK of the ionizable group lies on the "wrong" side of the protein pI. It is possible to measure the pK of a modified group in a protein when the delta pI per protonic unit in a given family of proteins (e.g., haemoglobin mutants) is less than unity.     

Probing protein unfolding through monitoring cysteine alkylation by matrix-assisted laser desorption/ionisation mass spectrometry

Matrix-assisted laser desorption/ionisation mass spectrometry was used to monitor interaction between three proteins and two basic Immobiline chemicals (pK 10.3 and pK >12) commonly used in immobilised pH gradients (IPG). For two of the investigated proteins, the observed alkylation channels of the cysteine residues exhibited unmistakable response to their gradual denaturation following treatment with different concentrations (0-8 M) of two commonly used denaturants, urea and guanidine hydrochloride. Our assessment for protein unfolding is based on the number and relative intensity of the alkylation channels, yet the present mass spectrometry data are in good agreement with data based on optical rotatory dispersion, in which another approach was used to assess protein unfolding. Whether the present simple, fast and specific mass spectrometry method can be developed as a probe for monitoring folding/unfolding of cysteine-containing proteins can only be demonstrated by generating similar data for a larger number of proteins.     

Quantitation of protein binding to the capillary wall in acidic, isoelectric buffers and means for minimizing the phenomenon

Notwithstanding the use of acidic, amphoteric, isoelectric buffers with isoelectric points (pI) in the pH 2-3 range, adsorption of proteins to the naked silica wall can be non-negligible. Two such buffers have been tested: iminodiacetic acid (IDA; pI 2.23, apparent pH 3.2 in 7 M urea) and aspartic acid (pI 2.77, apparent pH 3.7 in 7 M urea). Three potential quenchers of such interactions have been tested: hydroxyethylcellulose (HEC; number average molecular mass, Mr 27,000), TEPA (tetraethylenepentamine) and a novel, quatemarized piperazine [N(methyl-N-omega-iodobutyl)-N'-methylpiperazine] (Q-Pip), either alone or in binary and ternary mixtures. Human alpha- and beta-globin chains have been used as test proteins in capillary electrophoresis separations. It has been found that mixtures of these compounds are the worst possible remedy. E.g., a ternary mixture comprising 0.5% HEC, 0.5 mM TEPA and 1 mM Q-Pip still leaves behind 4.5% adsorbed protein onto the silica surface in runs in IDA buffer and 7 M urea (pH 3.2). Conversely, 0.5 mM TEPA or 1 mM Q-Pip, when used alone, minimize adsorption down to only 1.8% and 0.5%, respectively. When the same globin chain separations are performed in Asp and 7 M urea (pH 3.7), the situation is much worse: 44% protein is adsorbed in a ternary mixture of 0.5% HEC, 1 mM Q-Pip and 0.5 mM TEPA. However, when used alone, 0.5 mM TEPA and 1 mM Q-Pip reduce globin adsorption to levels of 8% and 5%, respectively. TEPA and Q-Pip are found to be in all cases the best quenchers of protein interaction to naked fused-silica; in addition they exhibit the unique property of smoothing the base-line and giving reproducible runs. The best method for desorbing bound protein was found to be an electrophoretic step consisting in driving sodium dodecylsulphate micelles from the cathodic reservoir.     

Charge heterogeneity of recombinant pro-urokinase and urinary urokinase, as revealed by isoelectric focusing in immobilized pH gradients

When analysing homogeneous preparations of recombinant pro-urokinase and urinary urokinase by isoelectric focusing (IEF) in immobilized pH gradients, an extreme charge heterogeneity was detected (at least ten major and ten minor bands in the pH range 7–10). This extensive polydispersity was not caused by different degrees of glycosylation, or by IEF artefacts, such as binding to carrier ampholytes or carbamylation by urea. A great part of this heterogeneity could be traced back to the existence of a multitude of protein molecules containing Cys residues at different oxidation levels (-SH, -S-S-, even cysteic acid). Owing to the very large number of Cys residues in pro-urokinase (24 out of a total of 411 amino acids) and to the relatively high pI of its native forms (pI 9.5–9.8; the native form is believed to contain all Cys residues as -S-S- bridges), the presence of SH or cysteic acid residues would increase the negative surface charge, as even SH groups would be extensively ionized. In pro-urokinase, part of the heterogeneity was also due to spontaneous degradation to urokinase and possibly also to cleavage into lower-molecular-mass fragments. When all these causes of heterogeneity were removed, the pI spectrum was reduced to only four, about equally intense, bands. The cause of this residual heterogeneity is unknown.     

Investigating the reaction of a novel silica capillary coating compound with proteins/peptides by matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry

Quaternized piperazine ((N-methyl-N-omega-iodobutyl-N'-methyl)piperazine; QPzl) is a novel compound described as an ideal coating material for the silica capillaries that are commonly used for capillary zone electrophoresis. In the course of such analysis, contact between such coatings and biomolecules may result in certain modifications of the latter. To gain specific information on such potential modifications, solutions at pH 10.0 containing both QPzl and standard proteins/peptides were incubated for various periods and examined by matrix-assisted laser desorption/ionisation mass spectrometry. The reduction of the S-S bridges, denaturation in 8 M urea, the isoelectric point of the protein and the duration of the incubation had a profound influence on the investigated reaction. Analysis in reflectron mode and post source decay identified Cys as the likely site of interaction. The implications of the present measurements for proteome analysis using capillary and gel electrophoresis are discussed.     

Latex Fractionation by Sedimentation and Colloidal Crystallization: The Case of Poly(styrene-co-acrylamide)

Poly(styrene-co-acrylamide) (PS-AAM) latex was prepared, fractionated by sedimentation under gravity, and characterized by PCS, infrared spectra, secondary and backscattered electron imaging in the scanning electron microscope, and electron spectroscopy imaging in an analytical transmission electron microscope. Three latex fractions were obtained. The lower fraction was opalescent and its particles were the more uniform, concerning size, chemical composition, and topochemical features. This lower fraction was still further fractionated by zonal centrifugation in a density gradient, yielding two fractions with similar macrocrystal-forming abilities but different sizes and chemical compositions. These results confirm those previously obtained for the PS-HEMA latex. Copyright 2000 Academic Press.     

Monitoring folding transitions of synthetic,branched-chain polypeptides by capillary zone electrophoresis

The coil/helix transition of a synthetic, branched-chain polymeric polypeptide (poly (Lys(Glu(1)-DL-Ala(3))EAK), 50-Lys residues long in the backbone, as a function of increasing molarities of methanol in solution, is here studied by both, circular dichroism (CD) and capillary zone electrophoresis. CD spectra showed that, at 75% v/v methanol, the transition from random coil to fully helical structure was obtained, in a pH 1.1 HCI solution in the presence of 20 mM NaCI. CZE studies, run in parallel, exhibited the classical unfolding to folding sigmoidal transition, with mid-point at 60% v/v methanol concentration, plateauing at ca. 80% v/v organic solvent. Surprisingly, though, such unfolding to folding transition was accompanied by an expansion, rather than a contraction, of the resulting ordered polypeptide. As the charge of the polypeptide (a pure polycation at a pH of 2.1 in CZE) was kept rigorously constant, a plot of the radius of the polymer along the sigmoidal transition clearly showed that the radius of gyration of the helical, structured polypeptide was in fact larger than that of the random coil. Such results were confirmed by molecular dynamics simulations, which indicated that the dimensions of such polypeptide, in alpha-helix configuration, were 8.5 nm (in length) and 3.2 nm (in diameter), whereas those of the corresponding random coil were 7.2 nm (in length) and 5.1 nm (length of shorter axis). It would thus appear that the randomized structure assumes the shape of a more compact object, roughly resembling a "rugby ball".     

Copper(II) in organic synthesis. IV Reaction of the copper(II) acetate complex of isatin-3-arylhydrazones with dimethyl acety-lenedicarboxylate.

The copper(II) acetate complex of isatin-3-phenylhy-drazone (2a) reacted with dimethyl acetylenedicarboxylate (DMAD) by two competitive pathways: a Cu⁺⁺ oxidation of the ligand and a [2+2] cycloaddition. The former reaction gave 3-car- benindolin-2-one (13) which reacted with DMAD in a l,3-dipolar cycloaddition, to give 3a. This was synthesized by an independent route. The phenyl radical, generated in the same process, was trapped by three DMAD and gave $\text{4a}$. The [2+2] cycloaddition gave a spiro adduct 10 which, by electrocyclic ring opening and intramolecular cyclization, allowed isolation of a pyridazino [3,4-b] indole (|5a). The reaction was performed on $\text{p}$-chlorophe-nylhydrazone 1b and the structure of 5b was demonstrated by X-ray analysis. A rationalization of the reactivity was attempted in terms of MO interactions of the reactants.