A new procedure for bovine milk digestion in a focused microwave oven: gradual sample addition to pre-heated acid

Milk samples can be efficiently digested using a focused microwave oven, however the conventional procedure of addition of concentrated acids to the liquid sample leads to digestates with elevated acidity and residual carbon concentrations. In this work a focused microwave oven was applied for acid digestion of bovine milk samples using a conventional and an alternative procedure based on gradual sample addition to hot and concentrated acids. A two-level 2³ full factorial design experiment with eight runs was carried out to evaluate the optimum experimental conditions for reducing both the residual carbon and the final acidity of digestates. The three studied parameters were: temperature of the digestion medium for sample addition, addition of sulfuric acid before the sample or during the first step, and number of aliquots of the sample gradually added. The best conditions were attained by adding small aliquots of milk (ten-fold a volume of 0.5 ml added during 5.0 min) to a digestion mixture containing 3.0 ml nitric acid plus 1.0 ml sulfuric acid heated at 105 °C. It was demonstrated that the digestion efficiency of the alternative procedure was better than the conventional procedure, i.e. 98 and 80%, respectively. The alternative procedure was applied for determination of Ba, Ca, Cu, K, Mg, Na, P, and Zn in whole and non-fat bovine milk. The accuracy was proved using two certified reference materials (whole and non-fat milk powder).     

Cycloaddition reaction of 2-azadienes derived from beta-amino acids with electron-rich and electron-deficient alkenes and carbonyl compounds. Synthesis of pyridine and 1,3-oxazine derivatives

Functionalized keto-enamines 6 were obtained by nucleophilic addition of enol ethers to the imine moiety of 2-azadienes derived from dehydroaspartic esters 4. Reactions of 2-azadiene 4c containing three electron-withdrawing substituents (CO(2)R) with enol ethers 5 in the presence of lithium perchlorate led to the formation of tetrahydropyridine derivatives 7 in a regio- and stereoselective fashion. 2H-[1,3]-oxazines 10 and pyridine derivatives 12 and 13 were obtained by heterocycloaddition reactions of electron-poor azadienes 4d-g containing two electron-withdrawing substituents (4-O(2)N-C(6)H(4), CO(2)R) in positions 1 and 4 with carbonyl derivatives (ethyl glyoxalate 9a and diethyl ketomalonate 9b) and the electron-deficient olefin tetracyanoethylene 11.     

2,8'-disubstituted-1,1'-binaphthyls: a new pattern in chiral ligands

The title binaphthyls 19 and 26, which are the positional isomers of 2-methoxy-2'-(diphenylphosphino)-1,1'-binaphthyl (MOP, 19) and 2-amino-2'-hydroxy-1,1'-binaphthyl (NOBIN, 26), have been synthesized by Suzuki coupling as the key step (10 + 15-->18), followed by functional group transformations, involving C-P and C-N bond formation (18-->19 and 18-->23). Racemic intermediate 22 was resolved by co-crystallization with N-benzylcinchonidinium chloride and the absolute configuration determined by X-ray crystallography. These novel binaphthyls are configurationally stable and, as such, potentially usable as chiral ligands in asymmetric reactions. Michael addition of the glycine-derived enolate 40 to methyl acrylate, carried out in the presence of (R)-(-)-27 as the chiral phase-transfer catalyst, afforded L-glutamic acid (S)-(+)-43 of 92% ee (after hydrolysis of the primary product).     

Extraction of americium,lanthanides and some fission product elements by bidentate phosphonates

The extraction of Am, Eu, Ce(III), Zr(IV), and Sr from aqueous nitric acid— nitrate media by dibutyl N,N-diethylcarbamylphosphonate and dibutyl N,N-diethylcar-bamylmethylenephosphonate dissolved in carbon tetrachloride was studied. The trivalent actinide and lanthanide elements may be separated in certain aqueous phase acidity regions from Fe(III), Zr(IV), and Sr, whereas the separation of actinide elements from the lanthanide elements is poor. The extractant to metal ratio in the extracted complexes of Am, Eu, and Ce(III) is 3. The interferences in the extraction due to acidic impurities in the extracting agent are discussed.     

Direct, two-step synthetic pathway to novel dibenzo[a,c]phenanthridines

Novel dibenzo[a,c]phenanthridines are prepared regioselectively by the application of a straightforward synthetic pathway, starting from new 3,4-diaryl- and 3,4-dihydro-3,4-diarylisoquinolines prepared via Ritter-type heterocyclization and the more classical two-step reductive amination/Bischler-Napieralski cyclization of triarylethanones, respectively. A comparative study of nonphenolic oxidative coupling methodologies provides a highly efficient procedure, based on the hypervalent iodine reagent phenyliodine(III) bis(trifluoroacetate) (PIFA), to accomplish the final coupling step.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

Study of ab initio molecular data for inelastic and reactive collisions involving the H3+ quasimolecule

The lowest two ab initio potential energy surfaces (PES), and the corresponding nonadiabatic couplings between them, have been obtained for the H3+ system; the molecular data are compared to those calculated with the diatomic in molecules (DIM) method. The form of the couplings is discussed in terms of the topology of the molecular structure of the triatomic. The method of Baer is employed to generate "diabatic" states and the residual nonadiabatic couplings are calculated. The ab initio results for these are markedly different from the corresponding DIM data, and show the need to consider the third PES.     

Use of highly efficient Draper-Lin small composite designs in the formal optimisation of both operational and chemical crucial variables affecting a FIA-chemiluminescence detection system

A new formal strategy in the multidimensional optimisation of the experimental variables affecting the chemiluminescence (CL) detection in flow injection analysis (FIA) is proposed here. The strategy implies several steps, being the most significant: selection of the variables to be studied and their experimental domain; use of a screening design to detect significant variables and interactions into the experimental region; study of the main effect of variables and second-order interactions; and finally application of a Draper-Lin small composite design (orthogonal) to obtain the optimum values of the significant variables. The methodology is applied to the determination of methylamine by FIA based on the use of the peroxyoxalate CL (PO-CL) reaction. Considering the high number of experiments required due to the different chemical and instrumental variables to be taken account and their adequate compatibility to obtain maximum sensitivity, the methodology offers a rigorous study of the main effects and interactions, achieving a reduction of experimental work.     

Comprehensive study of the methyl effect on the solvolysis rates of bridgehead derivatives

The effect of a bridgehead methyl group on the hydride ion affinity in the gas phase of bicyclo[1.1.1]pent-1-yl (1+), 1-norbornyl (3+), cubyl (5+), 1-adamantyl (7+), bicyclo[2.2.2]oct-1-yl (9+),and bicyclo[3.1.1]hept-1-yl (11+) cations has been studied using density functional theory and ab initio methods. It is concluded that the methyl group always increases the stability of the substituted cations. The effect of the solvent on the stability of methyl-substituted cations in relation to the unsubstituted cations has been studied using the polarizable continuum model of the self-consistent reaction field theory. In the case of rearranging cations, the nucleophilic assistance of the solvent is determined by means of the interaction energy of the corresponding water complexes. It is concluded that the solvent causes the relative stabilization of the parent cations. As a consequence, most of the methyl-substituted bridgehead derivatives show a lower solvolysis rate than the corresponding unsubstituted compounds. A nonqualitative explanation of the methyl effect on the relative stability of bridgehead cations in both gas phase and solution is given for the first time. The ratios of solvolysis products in the case of rearranging bridgehead cations have also been computed from the relative stability of the intermediate water complexes.     

Conformation of glycomimetics in the free and protein-bound state: structural and binding features of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man

The conformational properties of the C-glycosyl analogue of the core trisaccharide alpha-D-Man-(1 --> 3)-[alpha-D-Man-(1 --> 6)]-D-Man in solution have been carefully analyzed by a combination of NMR spectroscopy and time-averaged restrained molecular dynamics. It has been found that both the alpha-1,3- and the alpha-1,6-glycosidic linkages show a major conformational averaging. Unusual Phi ca. 60 degrees orientations for both Phi torsion angles are found. Moreover, a major conformational distinction between the natural compound and the glycomimetic affects to the behavior of the omega(16) torsion angle around the alpha-1 --> 6-linkage. Despite this increased flexibility, the C-glycosyl analogue is recognized by three mannose binding lectins, as shown by NMR (line broadening, TR-NOE, and STD) and surface plasmon resonance (SPR) methods. Moreover, a process of conformational selection takes place, so that these lectins probably bind the glycomimetic similarly to the way they recognize the natural analogue. Depending upon the architecture and extension of the binding site of the lectin, loss or gain of binding affinity with respect to the natural analogue is found.