ITSTUDIES ON THE EFFECT OF UREA ON THE COMPATIBILITY OF PMMA/PVC MIXTURES IN DMF BY A DILUTE- SOLUTION VISCOMETRY METHOD

The interaction between poly(methymethacrylate) (PMMA) and poly(vinyl chloride) (PVC) has been studied indilute urea solutions of dimethylformamide (DMF) at 28℃ using a dilute solution viscometry method. The results show thatthe polymer mixtures are compatible in DMF solution in the absence of urea. The influence of urea addition on the degree ofcompatibility of the polymer mixtures has been studied in terms of the compatibility parameters (△b_m and △[η]_m). It wasfound that the compatibility of the polymer mixtures is decreased with increasing urea addition, passing through a minimumat 0.5 M urea.     

Fine characterization of the ethylene and ethane sorption in poly(amide 12-block-tetramethylenoxide) copolymer/AgBF4 membranes

Ethylene/ethane sorption characteristics were determined for dry Pebax™ (poly(amide 12-block-tetramethylenoxide) copolymer)/AgBF₄ membranes by using an electronic microbalance. The membranes containing 0.7 and 22 wt.% AgBF₄ showed a dual-mode sorption isotherm. The ethane isotherms for all the membranes were of the Henry-type, which is the normal sorption for gases in rubbery polymers. The abnormal presence of Langmuir sorption sites only for ethylene in the rubbery copolymer, never reported sofar, is attributed to the silver-based specific complexation sites. The silver salt which dissolved in limited amounts in the rubbery copolymer had a much smaller Langmuir sorption capacity than the salt that crystallized in the copolymer. The sorption kinetics indicate that the crystallized salt did adsorb slowly ethylene according to a zeroth-order kinetics, but not ethane. The gas uptake kinetics resulting from a step of the pressure surrounding the copolymer exhibited one stage for ethane but two stages for ethylene. For the latter, there was first a fast Fickian sorption stage, then a drift of the zeroth-order sorption of ethylene on salt crystals, which contributes for a large part to the total uptake. The zeroth-order sorption suggests that the sorbed ethylene amount in the second-stage is independent of the crystal-surface coverage. The value of the Fickian diffusion coefficient calculated by fitting the kinetics with a solution of the second Fick’s law was 5 × 10⁻¹² m²/s for both ethylene (the first stage) and ethane, and is typical for small organic compounds in a rubbery material.     

Analysis of 2beta-carbomethoxy-3beta-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane in rat plasma. II. Pharmacokinetic profile in male and female Sprague-Dawley rats evaluated by capillary electrophoresis

This paper describes a pharmacokinetic study performed in Sprague-Dawley rats after i.v. administration of a single 6-mg/kg dose of 2beta-carbomethoxy-3beta-(4-fluorophenyl)-N-(3-iodo-E-allyl)nortropane (Altropane). Plasma samples were collected from the retro-orbital sinus at times up to 3 h after drug administration, extracted by solid-phase extraction, and the drug levels determined by capillary electrophoresis (CE). Pharmacokinetic parameters were determined by a standard noncompartmental model using WinNonlin version 1.5. The maximum plasma concentrations, clearances of the drug, and areas under the curve for male and female rats were 5.74 and 7.26 microg/ml, 135.7 and 98.5 ml/kg x min, and 44.23 and 60.92 microg x min/ml, respectively. The drug was cleared very rapidly from the systemic circulation, with a terminal t(1/2) of 7 to 10 min and a mean residence time of about 11 min for both sexes. The volume of distribution was approximately 1 l/kg. No metabolites were detected when the samples were analyzed individually. However, after samples were pooled and concentrated, traces of two unknown peaks that may represent metabolites were detected in concentrates from the last two timepoints. Part I of this work [J. Chromatogr. A, 895 (2000) 87] describes validation of CE methods for the analysis of aqueous and plasma samples of Altropane, including its solid-phase extraction from rat plasma.     

The de novo design of median molecules within a property range of interest

Summary In this paper an application is presented of the median molecule workflow to the de novo design of novel molecular entities with a property profile of interest. Median molecules are structures that are optimised to be similar to a set of existing molecules of interest as an approach for lead exploration and hopping. An overview of this workflow is provided together with an example of an instance using the similarity to camphor and menthol as objectives. The methodology of the experiments is defined and the workflow is applied to designing novel molecules for two physical property datasets: mean molecular polarisability and aqueous solubility. This paper concludes with a discussion of the characteristics of this method.     

Koordinationschemie von Dinitroresorcin mit Kupfer-, Kobalt-, Nickel-, Eisen- und Zinksalzen

The reactions of the bidentate dinitrosoresorcinol (DNR) with copper, cobalt, nickel, iron and zinc salts were investigated. This ligand was found to react with these metal salts in aqueous media where hydrogen ion was confirmed to be liberated except in case of iron. The solid complexes were prepared in alcoholic media. Chemical analyses, magnetic and spectral data were compatible to determine the structure of these complexes and their mode of chelation.

---

---

Mit 2 Abbildungen     

The iron phosphate K3Fe5(PO4)6

The crystal structure of tripotassium pentairon hexaphosphate has been determined by single‐crystal X‐ray diffraction. The structure contains one Fe atom on a center of symmetry, one K, two Fe and two P atoms on twofold axes, and one Fe, two P and one K atom in general positions. The K₃Fe₅(PO₄)₆ structure consists of a complex three‐dimensional framework of corner‐sharing between iron polyhedra, and corner‐ and edge‐sharing between PO₄ tetrahedra and iron polyhedra (FeO₅ and FeO₆). This linkage between iron and phosphorus forms intersecting channels containing the K atoms.     

Synthesis and H-NMR complexation studies of alkalimetal bithioxanthylidene crown ether complexes

Two synthetic routes to a novel class of sterically overcrowded alkenes, bithioxanthylidene crown ethers 1, are described. The ¹H spin-lattice relaxation times (T₁) of the crown ethers as well as those of the corresponding complexes with Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ in CDCl₃ were measured and the results were interpreted in terms of complexation affinities.     

Synthesis and characterisation of a series of alkylmagnesium amide and related oxygen-contaminated "alkoxy" compounds

Synthesised either by an unusual tert-butyl metathesis between tert-butyllithium and a n,s-butylmagnesium amide or by reaction of an alkyl Grignard reagent and a sodium amide, five tert-butylmagnesium amides, Bu(t)MgDBA (5)(DBA=dibenzylamide), Bu(t)MgDA (6)(DA=diisopropylamide), Bu(t)MgHMDS (7)(HMDS=1,1,1,3,3,3-hexamethyldisilazide), Bu(t)MgTMP (8)(TMP=2,2,6,6-tetramethylpiperidide) and Bu(t)MgNCy2 (9)(cy=cyclohexyl) have been isolated as crystalline solids. All five amides have been characterised by X-ray crystallography and solution NMR spectroscopic studies. The former studies reveal a common dimeric molecular structure with amido bridges in a planar (MgN)2 ring and terminal Bu(t) ligands on the Mg atoms. Also described is the dodecameric primary amide [Bu(n)MgN(H)Dipp]12 (10a) and its monomeric solvate Bu(n)MgN(H)Dipp.TMEDA (10b)(Dipp=2,6-diisopropylphenyl; TMEDA=N,N,N',N'-tetramethylethylenediamine). The crystal structures of the oxo-insertion products Bu(t)MgOBu(t).THF (11), Bu(t)Mg(mu-OBu(t))(mu-TMP)MgTMP (12) and Mg(OBu(n))HMDS.solv [solv=THF (13a) or Et2O (13b)], made fortuitously during the course of this work, are also presented.     

Nonlinear electrokinetics and "superfast" electrophoresis

Nonlinear and nonequilibrium electrophoresis of spherical particles of radius a is shown to be possible when the solid surface allows field or current penetration. At low particle Peclet numbers, transient capacitative charging occurs until the surface polarization completely screens the external field. For a DC applied field [see text], the resulting electrokinetic velocity reaches Dukhin's maximum value of [formula: see text], where [see text] and mu are the liquid permittivity and viscosity. At high Peclet numbers, electroosmotic convection of the electroneutral bulk stops the transient charging before complete field-line exclusion. For an ion-selective and conducting spherical granule, the polarization is then determined by the steady-state Ohmic current driven by the penetrated external field. The high-Peclet electrokinetic velocity is lower, diffusivity-dependent and scales as [see text].     

Structure and magnetism of a new pyrazolate bridged iron(II) spin crossover complex displaying a single HS-HS to LS-LS transition

The dinuclear iron(II) complex [(pypzH)(NCSe)Fe([micro sign]-pypz)(2)Fe(NCSe)(pypzH)].2H(2)O displays a single, sharp spin crossover transition between the [HS-HS] and [LS-LS] states and is structurally characterised above and below the T(1/2)= 225 K value