Beitrag zur Kenntnis des Systems Vanadin—Chrom—Stickstoff

The System V–Cr–N has been investigated at 1100 and 1400 °C and at nitrogen pressures between 1 and 1000 atmospheres by X-ray techniques. VN and CrN on the one hand and V₂N and Cr₂N on the other are forming complete series of solid solutions. The phase field of the mononitride solid solution is dependent on nitrogen pressure and temperature conditions.

---

---

Auszug aus der Diplomarbeit des Herrn Dipl.-Ing. Dr.W. Schebesta.     

Synthese neuer N-Vinylpyrrole

Syntheses of New N-Vinylpyrroles The reactions of pyrrolyl potassium ( 1 ) with (ethoxymethylene)malonic acid derivatives 2a–e yielded the carbanions 3a–e , which could be hydrolyzed to 4a–e , but with the exception of 4b they were not isolated, because a transformation to the N-vinylpyrroles 5a , c–e by elimination of ethanol took place; 1 reacted with 2b at 80°C to give 4b and 6 . Hydrolysis of 4b with KOH yielded 4g , which eliminated 1 mol of ethanol to form 5f , decarboxylation of which led to N-vinylpyrrole 7 . By cyclization of 5e under various conditions the pyrrolizines 8a , b are obtained, the hydrolysis of which did not give ketone 9 but only amino alcohol 10 . Some other cyclizations of 11a–c and 13 yielded the 3H-pyrrolizine derivatives 12a–c and 14 , respectively.     

Theoretical depolymerization kinetics. IV. Effect of a volatile fraction on the degradation of an initial “most probable” polymer

The effect of volatilization of molecules larger than monomer has been introduced into the solution of the Simha, Wall, and Blatz kinetic equations for the degradation of a high polymer with an initial “most probable” distribution. Equations describing the rate of sample weight and average molecular weight change result. They differ from the previous “most probable” equations primarily in the presence of an additive term representing the random splitting near the chain ends due to bond scission or transfer attack. Equations are also obtained for the rate of formation of each volatile species and hence the product distribution. The effect of volatilization of larger fragments is discussed in detail for the special case of random scission initiation. The product distribution is discussed for two special cases.     

The electrostatic field of B-DNA

The electrostatic field associated with one complete turn of B-DNA is presented. Two base sequences poly (dG) · poly (dC) and poly (dA) · poly (dT) are studied and the effects of sodium counterions bound to the nucleic acid are investigated. The contrasts between the electrostatic potential and the electrostatic field of the macromolecules are discussed and the possible applications of the field are considered.     

Synthesis of fused polycyclic aromatics by palladium-catalyzed annulation of arynes using 2-halobiaryls

The Pd-catalyzed annulation of arynes by 2-halobiaryls and related vinylic halides provides a very efficient, high yielding synthesis of polycyclic aromatic and heteroaromatic hydrocarbons. This process appears to involve the catalytic, stepwise coupling of two very reactive substrates, an aryne and an organopalladium species, to generate excellent yields of cross-coupled products.     

Elastic properties of crosslinked poly(vinyl alcohol) gels: Network topology

Current network theory exhibits inconsistencies which show up particularly clearly in deformation of networks prepared by crosslinking a polymer in solution. A check of theory can be obtained if one knows precisely the number of crosslinks in the network and if a range of deformations is applied to the network. In an effort to explore this problem we have examined the relation of shear modulus to crosslink density, primary molecular weight, and polymer concentration for a series of poly(vinyl alcohol) gels at low to intermediate concentrations. Aqueous poly(vinyl alcohol) solutions were crosslinked to form infinite networks using terephthalaldehyde. We find a large discrepancy with these poly(vinyl alcohol) gels between measured shear modulus and that calculated from classical elasticity theory assuming quantitative reaction of crosslinking. The ratio of measured to calculated modulus is independent of crosslink density for a given primary molecular weight and concentration. It shows linear dependence on polymer concentration prior to crosslinking and extrapolates to a critical concentration which is consistent with the effective sizes of the polymer molecules.     

Determination of the thermodynamic excess functionsG E,H E,andS E of the liquid ternary system AgCl—LiCl—KCl by means of EMF-measurements

By means of EMF-measurements using the formation cell $$graphite/Ag/AgCl(l,x_{AgCl} ) - LiCl(l,x_{LiCl} ) - KCl x_{KCl} /(Cl_2 )graphite$$ the partial molar excessGibbs energies,G _AgCl ^E , of silver chloride in the ternary system AgCl?LiCl?KCl were determined over the whole concentration range at five temperatures between 973 K and 1,123 K. The experimentally determinedG _AgCl ^E -values were fitted using theRedlich-Kister equation. From theRedlich-Kister parameters and their temperature dependence, obtained by the fitting procedure, the integral and partial molar excessGibbs energies, heats of mixing, and excess entropies were calculated. The fitting process permits also the calculation of the thermodynamic excess function of the binary system lithium chloride—potassium chloride.     

Ligand exchange reactions with η6-arene-η5-cyclopentadienyliron cations under thermal or photochemical conditions

Reactions of various η⁶-arene-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations with trimethyl, triethyl or triphenyl phosphite under either thermal or photochemical conditions all resulted in the replacement of the arene ligand with three phosphite ligands to give η⁵-tris(trimethyl, triethyl or triphenyl phosphite)-η⁵-cyclopentadienyliron or substituted cyclopentadienyliron cations. The yields of the phosphite complexes were higher from photolysis than from the analogous thermolysis. Photolysis of the η⁶-chlorobenzene-η⁵-cyclopentadienyliron cation (IX) carried out in the presence of a more basic or more electron-rich aromatic ligand resulted in the exchange of the chlorobenzene of IX with the more basic arene, thus providing synthetic routes to cyclopentadienyliron complexes that may be difficult to prepare by other means. New complexes synthesized in this way are the η⁶-2-phenylethyl tosylate-η⁵-cyclopentadienyliron cation and the CpFe⁺ complexes of thiophene, 2-methylthiophene, 3-methylthiophene and 2,5-dimethylthiophene.     

New methodologies for the preparation of porphodimethenes and their conversion to trans-porphyrins with functionalized naphthyl spacers

The MacDonald [2 + 2]-type condensation of readily available 5-aryl-substituted dipyrromethanes with acenaphthenequinone leads to the trans-syn- and anti-porphodimethenes, which in turn can be converted to the alpha,alpha- and alpha,beta-porphyrin atropisomers, respectively. Treatment of the metalated or unmetalated porphodimethenes with KOH or NaOMe in THF followed by protonation with HCl results in a ring opening of the acenaphthenone and formation of the trans-8-carboxynaphthylporphyrins or their esters (NaOMe) after oxidation. Alternatively, the porphyrin formation can be accomplished by reaction of the porphodimethenes with acids in the presence of water or methanol. Reaction with NaBH(4) in a THF--methanol mixture yields the corresponding dialcohols in nearly quantitative yields. Sixteen different building blocks were prepared in order to evaluate the generality of this new synthetic approach, with Ar = 2,4,6-Me(3)C(6)H(2); 2,6-Cl(2)C(6)H(3); 2,6-F(2)C(6)H(3); 3,4-tBu(2)C(6)H(3); 3,4,5-(MeO)(3)C(6)H(2); 4-BrC(6)H(4); 4-MeC(6)H(4); and 4-MeOOCC(6)H(4) at the meso positions. The synthesized porphodimethenes and porphyrins have been fully characterized, and the X-ray structure analyses of three representative derivatives are presented.     

Heats of solution of gaseous hydrocarbons in water at 25°C

The heats of solution at 25°C for a number of hydrocarbon gases are reported as measured by a calorimetric method. There is excellent agreement between the standard enthalpy changes of solution measured calorimetrically and those derived from high precision temperature dependent solubility measurements. However the calorimetrically determined standard enthalpies of solution of a number of gases are greatly improved over values obtained from low precision temperature dependent solubility measurements. A method is presented to readily estimate the standard errors in the standard enthalpy change for any process derived from the temperature dependence of the equilibrium constant for the process. Comparison of the standard enthalpies and entropies of solution of hydrocarbon gases in water shows that the standard free energies of solution for all hydrocarbon gases investigated are dominated by unfavorable entropy contributions. A strong linear correlation between the standard entropy of solution and the number of hydrogens in the hydrocarbon molecule is found. This correlation suggests that the hydrocarbon hydrophobic effect is regulated by the number of allowable configurations of a water molecule in contact with each C–H group.