PSEUDOHALOGEN CHEMISTRY. PART IV. HETEROLYTIC ADDITION OF THIOCYANOGEN TO ALKENES

Abstract

Thiocyanogen reacts slowly with alkenes, in the presence of a radical inhibitor in benzene or acetic acid in the dark at 25°, to yield α,β-dithiocyanates, α-isothiocyanates-β-thiocyanates and, in acetic acid, α-acetoxy-β-thiocyanates in varying proportions. The additions to alkyl alkenes are trans-stereospecific, and, in the case of the α-isothiocyanato-β-thiocyanates, non-regiospecific. The additions to aryl alkenes are trans-stereoselective and regiospecific, yielding the Markownikov-orientated α-isothiocyanato-β-thiocyanates. A heterolytic mechanism involving a two-step, kinetically controlled addition, with the formation of a cyano-sulfonium ion intermediate, e.g., 35, in the case of alkyl alkenes and an open carbonium ion, e.g., 36, in the case of aryl alkenes, is suggested. The diothiocyanate: isothiocyanato-thiocyanate ratios are discussed in terms of kinetic and steric control of reaction.     

SOME HETEROCYCLIC PHOSPHOROCHLORIDATES AND THE FORMATION OF OTHER HETEROCYCLIC ORGANOPHOSPHORUS COMPOUNDS

Abstract

Pyrrolidine, morpholine, and β-hydroxyethylmorpholine have been phosphorylated with phosphorus oxychloride, phenylphosphorodichloridate, p-chlorophenylphosphorodichloridate and thiophosphoryl chloride. The resultant phosphorodichloridates have been condensed with a wied range of nucleophilic reagents, e.g. amines, hydrazines, phenols and isobutanol. Piperazine with phosphorus oxychloride (2 mols) gave the N(1) N(4)-diphosphorotetrachloridate, which was characterized as the tetracyclohexylamidate. β-Hydroxyethylpiperazine was similarly phosphorylated to the N,O-diphosphorotetrachloridate which was characterized as the tetraphenylhydrazidate.

Condensation of pyrrolidine (2 mols) with phosphorus oxychloride (1 mol) afforded N,N′-dipyrrolidinophosphorochloridate which was reacted with phenylhydrazide and sodium azide. The phosphoroazide with triphenylphosphine afforded the corresponding triphenylphosphinimine. N-Phenyl N′-pyrrolidinophosphorochloridate with aqueous pyridine gave the corresponding pyrophosphoramide and the stability of the pyrophosphoramide towards hydrolysis was examined. 1,2-Cyclohexanediol was phosphorylated with phenylphosphorodichloridate and thiophosphorylchloride. Trans-4-t-Butylcyclohexyl N,N′-diphenylhydrazinophosphorothioate by reaction with formaldehyde gave a tetra-azaphosphorine P-sulfide. Trans-4-t-Butylcyclohexyl N-phenyl N′-phenylphosphorodiamidic hydrazide reacted with 1,4-dibromobut-2-ene to give a 1,2-diazahex-4-ene.     

Using Metal Complex Ion-Molecule Reactions in a Miniature Rectilinear Ion Trap Mass Spectrometer to Detect Chemical Warfare Agents

The gas-phase reactions of a series of coordinatively unsaturated [Ni(L)_n]^y+ complexes, where L is a nitrogen-containing ligand, with chemical warfare agent (CWA) simulants in a miniature rectilinear ion trap mass spectrometer were investigated as part of a new approach to detect CWAs. Results show that upon entering the vacuum system via a poly(dimethylsiloxane) (PDMS) membrane introduction, low concentrations of several CWA simulants, including dipropyl sulfide (simulant for mustard gas), acetonitrile (simulant for the nerve agent tabun), and diethyl phosphite (simulant for nerve agents sarin, soman, tabun, and VX), can react with metal complex ions generated by electrospray ionization (ESI), thereby providing a sensitive means of detecting these compounds. The [Ni(L)_n]²⁺ complexes are found to be particularly reactive with the simulants of mustard gas and tabun, allowing their detection at low parts-per-billion (ppb) levels. These detection limits are well below reported exposure limits for these CWAs, which indicates the applicability of this new approach, and are about two orders of magnitude lower than electron ionization detection limits on the same mass spectrometer. The use of coordinatively unsaturated metal complexes as reagent ions offers the possibility of further tuning the ion-molecule chemistry so that desired compounds can be detected selectively or at even lower concentrations.

Synthesis of a Calix[4]crown‐6 Cone Conformer‐Based Oligomer and its Metal Cation Extraction Abilities

A new calixcrown‐6 oligomer 5 was synthesized by reacting a 1,3‐distal di‐amino derivative of cone p‐tert‐butylcalix[4]crown‐6 with malonyl dichloride. Extraction studies with precursor monomers 2 and 3 and oligomer 5 showed differences in their metal cation extraction behavior and selectivity. Precursors monomers 2 and 3 were selective for Hg²⁺; whereas, oligomer 5 showed high affinity towards both alkali (Li⁺, Na⁺, K⁺, and Cs⁺) and heavy metal cations (Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺).     

Rates of Sulfonation of Bead Copolymers of Styrene Cross - Linked with Mixtures of m- and p-Divinylbenzene

Abstract

The rate of sulfonation of bead copolymers of styrene cross-linked with 8 mole % divinylbenzene (mixed isomers) is remarkably sensitive to the isomeric (para/meta) composition of the mixture of divinylbenzenes. The rate is enhanced by a factor of 4 for compositions containing 20–40% para isomer.     

Fine Tuning of Heme Reactivity: Hydrogen-Bonding and Dipole Interactions Affecting Ligand Binding to Hemoproteins

Heme reactivity in hemoproteins is governed by the microenvironment near the ligand binding site. In order to quantify polarity effects on heme ligand binding, the kinetics of O₂ and CO binding have been measured for a series of synthetic heme models equipped with a range of groups of varying dipole moments positioned near the heme coordination site. For hemes with polar aprotic groups, both O₂ on (k′) and off rates (k) are found to be dependent on the dipole moment. For model systems containing protic groups, the O₂ off rate is substantially reduced due to hydrogen bonding with the coordinated O₂. The hydrogen-bonding stabilization is estimated to be 0.7 and 1.6 kcal/mol for an alcohol and a secondary amide, respectively. CO binding displays little correlation with a polarity effect; instead it seems to depend upon the size and position of the polar group.     

Metal ion complexation in acetonitrile by cone,di-ionised calix[4]arene-1,2-crown ethers with two pendant dansyl fluorophores

Four cone calix[4]arene-1,2-crown ethers each with two ionisable side arms containing dansyl groups are synthesised. The crown ether ring on the lower rim is varied from crown-4 to crown-5 with hydrogen or tert-butyl groups on the para position of the upper rim. Di(tetramethylammonium) salts of the di-ionised ligands are utilised for spectrofluorimetric titration experiments in MeCN. The influence of alkali metal, alkaline earth metal and selected transition and heavy metal (Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) cations on the spectroscopic properties of the two dansyl groups linked to the lower rim of the conformationally locked, di-ionised calix[4]arene-1,2-crown ether frameworks is investigated by emission spectrophotometry. All of the metal cations induce red shifts in the emission spectra of the di-ionised ligands. The metal cations produce enhancement or quenching of the fluorescence emissions. Changes in the fluorescence emission as a function of the metal cation identity, the lower rim crown ether ring size and the absence or presence of upper rim tert-butyl groups are investigated.     

Metal ion separations with proton-ionizable crown ethers and their polymers

Abstract

Lipophilic crown ethers with pendent proton-ionizable groups are novel complexing agents for use in metal ion separations by solvent extraction. For a series of structurally related, lipophilic dibenzocrown ether carboxylic acids, the efficiency and selectivity of competitive alkali metal cation extraction for aqueous solution into chloroform is found to be strongly influenced by the crown ether ring size and the lipophilic group attachment site. Reaction of dibenzocrown ether carboxylic acids with formaldehyde in formic acid produces condensation polymers which possess both ion-exchange and cyclic polyether binding sites for metal ion complexation. These resins exhibit excellent exchange kinetics for competitive alkali metal cation sorption from aqueous solution and subsequent stripping and may be used in concentrator columns for the recovery of these metal ions from very dilute aqueous solution. Cation selectivity in the sorption and stripping steps is controlled by the structure of the crown ether monomer unit.     

Collision cell pressure effect on CID spectra pattern using triple quadrupole instruments: a RRKM modeling

Control of the ion internal energy in mass spectrometry is needed to establish a workable mass spectral library. The purpose of this study is to understand and to compare the pressure effects on the collision‐induced dissociation (CID) spectrum pattern recorded using triple quadrupole instruments. The monoprotonated Leucine enkephalin [YGGFL, H⁺] was used as a thermometer molecule to calibrate the electrospray ionization (ESI) and the CID internal energies deposited on the molecular species and the time scale of ion decompositions. The survival yield and the ratio of a₄/b₄ fragment ions were mainly monitored. The energy uptake for the ESI source geometry used in our study has no impact on the CID spectrum fingerprint. The collision cell pressure for the [YGGFL, H⁺] has a major influence on the SY curves slope and on the experimental time scale. To demonstrate the pressure effect on internal energy distribution, three models (threshold, thermal and collisional) based on RRKM theory were built using the Masskinetics software. As a result, the limit of each model is discussed, and the investigation demonstrates that the thermal model, using truncated Maxwell‐Boltzmann internal energy distribution, is well‐suited for simulating the experimental data at high pressure widely used in the analytical conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Bipolar Electrochemistry

A bipolar electrode (BPE) is an electrically conductive material that promotes electrochemical reactions at its extremities (poles) even in the absence of a direct ohmic contact. More specifically, when sufficient voltage is applied to an electrolyte solution in which a BPE is immersed, the potential difference between the BPE and the solution drives oxidation and reduction reactions. Because no direct electrical connection is required to activate redox reactions, large arrays of electrodes can be controlled with just a single DC power supply or even a battery. The wireless aspect of BPEs also makes it possible to electrosynthesize and screen novel materials for a wide variety of applications. Finally, bipolar electrochemistry enables mobile electrodes, dubbed microswimmers, that are able to move freely in solution.