Separation technology of used polymers

The technology of separating plastics from the municipal waste stream for reuse is reviewed, with emphasis on the key role played by the bottle sorting step. Experience gained in the first year's operation of two large commercial recycling plants provides a better understanding of practical problems encountered, their relative importance, and technical advances needed for improved operation. It is concluded that purity of feedstock and processing rate are two critical independent variables requiring technical and business understanding and management. Hypothetical examples illustrate the interplay of these with dependent variables of yield and sorting cost.     

New 19F NMR methodology reveals structures of molecules in complex mixtures of fluorinated compounds

Although the number of natural fluorinated compounds is very small, fluorinated pharmaceuticals and agrochemicals are numerous. ¹⁹F NMR spectroscopy has a great potential for the structure elucidation of fluorinated organic molecules, starting with their production by chemical or chemoenzymatic reactions, through monitoring their structural integrity, to their biotic and abiotic transformation and ultimate degradation in the environment. Additionally, choosing to incorporate ¹⁹F into any organic molecule opens a convenient route to study reaction mechanisms and kinetics. Addressing limitations of the existing ¹⁹F NMR techniques, we have developed methodology that uses ¹⁹F as a powerful spectroscopic spy to study mixtures of fluorinated molecules. The proposed ¹⁹F-centred NMR analysis utilises the substantial resolution and sensitivity of ¹⁹F to obtain a large number of NMR parameters, which enable structure determination of fluorinated compounds without the need for their separation or the use of standards. Here we illustrate the ¹⁹F-centred structure determination process and demonstrate its power by successfully elucidating the structures of chloramination disinfectant by-products of a single mono-fluorinated phenolic compound, which would have been impossible otherwise. This novel NMR approach for the structure elucidation of molecules in complex mixtures represents a major contribution towards the analysis of chemical and biological processes involving fluorinated compounds.

¹⁹F-centred NMR structure determination protocol alleviates the need for compound separation. Disinfection byproducts of chloramination were unraveled by analyzing the reaction pathways of a single fluorinated molecule.     

Synthesis of Novel C/D Ring Modified Bile Acids

Bile acid receptors have been identified as important targets for the development of new therapeutics to treat various metabolic and inflammatory diseases. The synthesis of new bile acid analogues can help elucidate structure–activity relationships and define compounds that activate these receptors selectively. Towards this, access to large quantities of a chenodeoxycholic acid derivative bearing a C-12 methyl and a C-13 to C-14 double bond provided an interesting scaffold to investigate the chemical manipulation of the C/D ring junction in bile acids. The reactivity of this alkene substrate with various zinc carbenoid species showed that those generated using the Furukawa methodology achieved selective α-cyclopropanation, whereas those generated using the Shi methodology reacted in an unexpected manner giving rise to a rearranged skeleton whereby the C ring has undergone contraction to form a novel spiro–furan ring system. Further derivatization of the cyclopropanated steroid included O-7 oxidation and epimerization to afford new bile acid derivatives for biological evaluation.     

Organogelators based on the norbornane scaffold

Using the rigid norbornane scaffold, a series of low-molecular-weight organogelators has been synthesised and evaluated. Three separate compounds (16, 19 and 20) were identified as organogelators in three aromatic organic solvents (PhMe, anisole and o-xylene). The formation of fibrillar assemblies at nanometre level was confirmed using atomic force microscopy and transmission electron microscopy.     

Stability of low levels of perchlorate in drinking water and natural water samples

Perchlorate ion (ClO₄⁻) is an environmental contaminant of growing concern due to its potential human health effects, impact on aquatic and land animals, and widespread occurrence throughout the United States. The determination of perchlorate cannot normally be carried out in the field. As such, water samples for perchlorate analysis are often shipped to a central laboratory, where they may be stored for a significant period before analysis. The stability of perchlorate ion in various types of commonly encountered water samples has not been generally examined—the effect of such storage is thus not known. In the present study, the long-term stability of perchlorate ion in deionized water, tap water, ground water, and surface water was examined. Sample sets containing approximately 1000, 100, 1.0, and 0.5 μg l⁻¹ perchlorate ion in deionized water and also in local tap water were formulated. These samples were analyzed by ion chromatography for perchlorate ion concentration against freshly prepared standards every 24 h for the first 7 days, biweekly for the next 4 weeks, and periodically after that for a total of 400 or 610 days for the two lowest concentrations and a total of 428 or 638 days for the high concentrations. Ground and surface water samples containing perchlorate were collected, held and analyzed for perchlorate concentration periodically over at least 360 days. All samples except for the surface water samples were found to be stable for the duration of the study, allowing for holding times of at least 300 days for ground water samples and at least 90 days for surface water samples.     

Investigation,by single photon ionisation (SPI)–time-of-flight mass spectrometry (TOFMS), of the effect of different cigarette-lighting devices on the chemical composition of the first cigarette puff

Soft single-photon ionisation (SPI)–time-of-flight mass spectrometry (TOFMS) has been used to investigate the effect of different cigarette-lighting devices on the chemical composition of the mainstream smoke from the first cigarette puff. Lighting devices examined were a Borgwaldt electric lighter, a propane/butane gas lighter, a match, a candle, and the burning zone of another cigarette. To eliminate the effects of the different masses of tobacco burnt by use of the different lighting methods a normalisation procedure was performed which enabled investigation of changes in the chemical patterns of the resulting smoke. When another cigarette was used as the lighting device, elevated levels of ammonia and other nitrogen-containing substances were observed. These are high in the sidestream smoke of the cigarette used for lighting and would be drawn into the mainstream smoke of the cigarette being lit. In contrast, smoke from the cigarette lit by the electric lighter contained slightly higher normalised amounts of isoprene. Lighting the cigarette by use of a candle resulted in larger amounts of substances, e.g. benzene, which most probably originated from thermal decomposition of wax. The composition of the first puff of smoke obtained by use of the three lighting methods with open flames (gas lighter, match, and candle) was usually similar whereas the composition of the smoke produced by use of the electric lighter and the cigarette as the lighter were more unique. The chemical patterns generated by the different lighting devices could, however, be separated by principal-component analyses. Two additional test series were also studied. In the first the cigarette was lit with an electric lighter, then extinguished, the ash was cut off, and the cigarette was re-lit. In the second the cigarette was heated in an oven to 80 °C for 5 min before being lit. These treatments did not result in changes in the chemical composition compared with cigarettes lit in the ordinary way. Figure Time-of-flight mass spectrometry (TOFMS) has been used to investigate the effect of different cigarette-lighting devices on the chemical composition of the mainstream smoke from the first cigarette puff     

Structural studies of the phase, aggregation and surface behaviour of 1-alkyl-3-methylimidazolium halide + water mixtures

The surface, phase and aggregation behaviour of mixtures of 1-alkyl-3-methylimidazolium halide, [C(n)mim]X, where n is the alkyl chain length, with water has been explored using a variety of methods. Critical micelle concentrations (cmc) and micelle structures have been determined for aqueous [C(n)mim]Br solutions for n=2, 4, 6, 8, and 10. Small-angle neutron scattering (SANS) measurements reveal that for the n=8 and 10 systems, at concentrations just above the cmc, small near-spherical aggregates exist, which, after initial growth, possess core radii (aggregation numbers) at intermediate concentrations of 10.5+/-0.5 Angstrom (22+/-2) and 13.2+/-0.5 Angstrom (40+/-3), respectively, for n=8 and n=10. Towards higher concentrations, the aggregates appear to grow, with the aggregates in the [C(10)mim]Br system becoming increasingly elongated (prolate) with increasing concentration. No evident aggregates are formed in the systems with n=2 and 4. In the n=6 system, it appears that oblate aggregates with radius approximately 9 Angstrom form at the cmc and that the radius increases with increasing concentration. For longer alkyl chain lengths, at high concentrations lyotropic mesophases form in some systems. The mesophase region for the [C(8)mim]Cl system has been explored across the composition range using X-ray diffraction and (2)H NMR spectroscopy. Both techniques suggest that a major hexagonal phase with lattice parameter of 29.5+/-0.5 Angstrom coexists with a minor lamellar phase (23.5+/-0.3 Angstrom) or possibly a second hexagonal phase (27.1+/-0.4 Angstrom). The area per adsorbed molecule at the surface of [C(8)mim]Br solutions has been measured as a function of concentration using neutron reflectometry. A minimum in the area per molecule behaviour is coincident with a minimum identified in the surface tension isotherm occurring close to the cmc. The data suggest depletion of [C(8)mim]Br from the surface region occurs at concentrations immediately above the cmc.     

Sol-gel polycondensation of methyltrimethoxysilane in ethanol studied by <Superscript>29</Superscript>Si NMR spectroscopy using a two-step acid/base procedure

Sol-gel polymerization of methyltrimethoxysilane (MTMS) in ethanol using a two-step acid/base catalyzed procedure (B2) is followed by ²⁹Si NMR spectroscopy. Analysis of the structural evolution of the B2 system shows that esterification of monomeric and end silicon species is rate-limited while that of linear and cyclic species is able to reach pseudoequilibrium in the second basic step. Condensation reactivity is reduced with increasing network connectivity, however, to a much less degree under B2 conditions than MTMS polymerization under acidic conditions. Steric effects as well as many other factors are attributed to this trend. The concentration of cyclic and polycyclic species of the B2 system is nearly 3 times lower compared to the acid-catalyzed system. The empirical degree of condensation at the gel point is determined to be 0.88. The effects of cyclization and phase separation on MTMS gelation are discussed for both B2 and acid-catalyzed systems. Based on these results it is believed that MTMS-based gels form for B2 and not acid-catalyzed conditions due to reduced cyclization, rapid hydrolysis and condensation, effective use of functional groups, and effective contribution of branched and polycyclic species as crosslinking points to connect polymeric chains in the B2 system.     

Comparison of different methods to measure contact angles of soil colloids

We compared five different methods, static sessile drop, dynamic sessile drop, Wilhelmy plate, thin-layer wicking, and column wicking, to determine the contact angle of colloids typical for soils and sediments. The colloids (smectite, kaolinite, illite, goethite, hematite) were chosen to represent 1:1 and 2:1 layered aluminosilicate clays and sesquioxides, and were either obtained in pure form or synthesized in our laboratory. Colloids were deposited as thin films on glass slides, and then used for contact angle measurements using three different test liquids (water, formamide, diiodomethane). The colloidal films could be categorized into three types: (1) films without pores and with polar-liquid interactions (smectite), (2) films with pores and with polar-liquid interactions (kaolinite, illite, goethite), and (3) films without pores and no polar-liquid interactions (hematite). The static and dynamic sessile drop methods yielded the most consistent contact angles. For porous films, the contact angles decreased with time, and we consider the initial contact angle to be the most accurate. The differences in contact angles among the different methods were large and varied considerably: the most consistent contact angles were obtained for kaolinite with water, and illite with diiodomethane (contact angles were within 3 degrees); but mostly the differences ranged from 10 degrees to 40 degrees among the different methods. The thin-layer and column wicking methods were the least consistent methods.     

Large Zero‐Field Splittings of the Ground Spin State Arising from Antisymmetric Exchange Effects in Heterometallic Triangles

[Ru₂Mn(O)(O₂CtBu)₆(py)₃] has an S=⁵/₂ ground state with a very large zero‐field splitting (ZFS) of D=2.9 cm^?1, as characterized by EPR spectroscopy at 4–330 GHz. This is far too large to be due to the Mn^II ion (D <0.2 cm^?1), as shown from the {Fe₂Mn} analogue, but can be modeled by antisymmetric exchange effects.