New cationic group 4 metal alkyl complexes

Cationic group 4 metal alkyl complexes containing tetradentate Schiff base ligands, (acen) Zr(R)⁺ and (F6-acen) Zr(R)⁺, are prepared by protonolysis of suitable neutral dialkyl precursors. These complexes display electrophilic behavior and are moderately active ethylene polymerization catalysts in the presence of 1 molar equivalent of AlR₃.     

Defined carrageenan derivatives as angiogenesis inhibitors

Three carrageenans derived from red algae and three partially modified carrageenans were tested for their ability to inhibit the formation of new blood capillaries on the chorionallantois membrane of the hen egg. It could be clearly demonstrated that they were better angiogenesis inhibitors than the standard compound suramin.     

Optimization of STEM-HAADF Electron Tomography Reconstructions by Parameter Selection in Compressed Sensing Total Variation Minimization-Based Algorithms

A novel procedure to optimize the 3D morphological characterization of nanomaterials by means of high angle annular dark field scanning-transmission electron tomography is reported and is successfully applied to the analysis of a metal- and halogen-free ordered mesoporous carbon material. The new method is based on a selection of the two parameters (μ and β) which are key in the reconstruction of tomographic series by means of total variation minimization (TVM). The parameter-selected TVM reconstructions obtained using this approach clearly reveal the porous structure of the carbon-based material as consisting of a network of parallel, straight channels of ≈6 nm diameter ordered in a honeycomb-type arrangement. Such an unusual structure cannot be retrieved from a TVM 3D reconstruction using default reconstruction values. Moreover, segmentation and further quantification of the optimized 3D tomographic reconstruction provide values for different textural parameters, such as pore size distribution and specific pore volume that match very closely with those determined by macroscopic physisorption techniques. The approach developed can be extended to other reconstruction models in which the final result is influenced by parameter choice.     

New Interfaces and Approaches to Machine Learning When Classifying Gestures within Music

Interactive music uses wearable sensors (i.e., gestural interfaces—GIs) and biometric datasets to reinvent traditional human–computer interaction and enhance music composition. In recent years, machine learning (ML) has been important for the artform. This is because ML helps process complex biometric datasets from GIs when predicting musical actions (termed performance gestures). ML allows musicians to create novel interactions with digital media. Wekinator is a popular ML software amongst artists, allowing users to train models through demonstration. It is built on the Waikato Environment for Knowledge Analysis (WEKA) framework, which is used to build supervised predictive models. Previous research has used biometric data from GIs to train specific ML models. However, previous research does not inform optimum ML model choice, within music, or compare model performance. Wekinator offers several ML models. Thus, we used Wekinator and the Myo armband GI and study three performance gestures for piano practice to solve this problem. Using these, we trained all models in Wekinator and investigated their accuracy, how gesture representation affects model accuracy and if optimisation can arise. Results show that neural networks are the strongest continuous classifiers, mapping behaviour differs amongst continuous models, optimisation can occur and gesture representation disparately affects model mapping behaviour; impacting music practice.     

Geometry Optimization of Thermoelectric Modules: Deviation of Optimum Power Output and Conversion Efficiency

Besides the material research in the field of thermoelectrics, the way from a material to a functional thermoelectric (TE) module comes alongside additional challenges. Thus, comprehension and optimization of the properties and the design of a TE module are important tasks. In this work, different geometry optimization strategies to reach maximum power output or maximum conversion efficiency are applied and the resulting performances of various modules and respective materials are analyzed. A Bi₂Te₃-based module, a half-Heusler-based module, and an oxide-based module are characterized via FEM simulations. By this, a deviation of optimum power output and optimum conversion efficiency in dependence of the diversity of thermoelectric materials is found. Additionally, for all modules, the respective fluxes of entropy and charge as well as the corresponding fluxes of thermal and electrical energy within the thermolegs are shown. The full understanding and enhancement of the performance of a TE module may be further improved.     

Highly charged ions in a new era of high resolution X-ray astrophysics

X-ray astronomy and ground-based atomic physics have a long history of fruitful collaboration: Sound understanding of the underlying atomic physics is the key to reliable interpretation of the spectra from celestial sources; conversely, astronomical spectra have been used to benchmark and advance atomic physics. This interplay is about to become even more important as we enter a new era of high-resolution X-ray astrophysics with large effective collection area. Although high-resolution observations with the gratings on the Chandra and XMM-Newton observatories continue to drive new science, upcoming planned and proposed missions will open up new discovery space in the near future that is currently challenging to access: high-resolution spectroscopy on extended sources, in the Fe K band, and on short time scales. This review summarizes open questions in these areas and the design parameters for the Hitomi, XRISM, Athena, and Arcus observatories. The expected high quality of spectra taken with these observatories puts new constraints on the accuracy of atomic reference data required to take full advantage of the diagnostic potential of these spectra.     

Investigation,by single photon ionisation (SPI)–time-of-flight mass spectrometry (TOFMS), of the effect of different cigarette-lighting devices on the chemical composition of the first cigarette puff

Soft single-photon ionisation (SPI)–time-of-flight mass spectrometry (TOFMS) has been used to investigate the effect of different cigarette-lighting devices on the chemical composition of the mainstream smoke from the first cigarette puff. Lighting devices examined were a Borgwaldt electric lighter, a propane/butane gas lighter, a match, a candle, and the burning zone of another cigarette. To eliminate the effects of the different masses of tobacco burnt by use of the different lighting methods a normalisation procedure was performed which enabled investigation of changes in the chemical patterns of the resulting smoke. When another cigarette was used as the lighting device, elevated levels of ammonia and other nitrogen-containing substances were observed. These are high in the sidestream smoke of the cigarette used for lighting and would be drawn into the mainstream smoke of the cigarette being lit. In contrast, smoke from the cigarette lit by the electric lighter contained slightly higher normalised amounts of isoprene. Lighting the cigarette by use of a candle resulted in larger amounts of substances, e.g. benzene, which most probably originated from thermal decomposition of wax. The composition of the first puff of smoke obtained by use of the three lighting methods with open flames (gas lighter, match, and candle) was usually similar whereas the composition of the smoke produced by use of the electric lighter and the cigarette as the lighter were more unique. The chemical patterns generated by the different lighting devices could, however, be separated by principal-component analyses. Two additional test series were also studied. In the first the cigarette was lit with an electric lighter, then extinguished, the ash was cut off, and the cigarette was re-lit. In the second the cigarette was heated in an oven to 80 °C for 5 min before being lit. These treatments did not result in changes in the chemical composition compared with cigarettes lit in the ordinary way. Figure Time-of-flight mass spectrometry (TOFMS) has been used to investigate the effect of different cigarette-lighting devices on the chemical composition of the mainstream smoke from the first cigarette puff     

Structural studies of the phase, aggregation and surface behaviour of 1-alkyl-3-methylimidazolium halide + water mixtures

The surface, phase and aggregation behaviour of mixtures of 1-alkyl-3-methylimidazolium halide, [C(n)mim]X, where n is the alkyl chain length, with water has been explored using a variety of methods. Critical micelle concentrations (cmc) and micelle structures have been determined for aqueous [C(n)mim]Br solutions for n=2, 4, 6, 8, and 10. Small-angle neutron scattering (SANS) measurements reveal that for the n=8 and 10 systems, at concentrations just above the cmc, small near-spherical aggregates exist, which, after initial growth, possess core radii (aggregation numbers) at intermediate concentrations of 10.5+/-0.5 Angstrom (22+/-2) and 13.2+/-0.5 Angstrom (40+/-3), respectively, for n=8 and n=10. Towards higher concentrations, the aggregates appear to grow, with the aggregates in the [C(10)mim]Br system becoming increasingly elongated (prolate) with increasing concentration. No evident aggregates are formed in the systems with n=2 and 4. In the n=6 system, it appears that oblate aggregates with radius approximately 9 Angstrom form at the cmc and that the radius increases with increasing concentration. For longer alkyl chain lengths, at high concentrations lyotropic mesophases form in some systems. The mesophase region for the [C(8)mim]Cl system has been explored across the composition range using X-ray diffraction and (2)H NMR spectroscopy. Both techniques suggest that a major hexagonal phase with lattice parameter of 29.5+/-0.5 Angstrom coexists with a minor lamellar phase (23.5+/-0.3 Angstrom) or possibly a second hexagonal phase (27.1+/-0.4 Angstrom). The area per adsorbed molecule at the surface of [C(8)mim]Br solutions has been measured as a function of concentration using neutron reflectometry. A minimum in the area per molecule behaviour is coincident with a minimum identified in the surface tension isotherm occurring close to the cmc. The data suggest depletion of [C(8)mim]Br from the surface region occurs at concentrations immediately above the cmc.     

Sol-gel polycondensation of methyltrimethoxysilane in ethanol studied by <Superscript>29</Superscript>Si NMR spectroscopy using a two-step acid/base procedure

Sol-gel polymerization of methyltrimethoxysilane (MTMS) in ethanol using a two-step acid/base catalyzed procedure (B2) is followed by ²⁹Si NMR spectroscopy. Analysis of the structural evolution of the B2 system shows that esterification of monomeric and end silicon species is rate-limited while that of linear and cyclic species is able to reach pseudoequilibrium in the second basic step. Condensation reactivity is reduced with increasing network connectivity, however, to a much less degree under B2 conditions than MTMS polymerization under acidic conditions. Steric effects as well as many other factors are attributed to this trend. The concentration of cyclic and polycyclic species of the B2 system is nearly 3 times lower compared to the acid-catalyzed system. The empirical degree of condensation at the gel point is determined to be 0.88. The effects of cyclization and phase separation on MTMS gelation are discussed for both B2 and acid-catalyzed systems. Based on these results it is believed that MTMS-based gels form for B2 and not acid-catalyzed conditions due to reduced cyclization, rapid hydrolysis and condensation, effective use of functional groups, and effective contribution of branched and polycyclic species as crosslinking points to connect polymeric chains in the B2 system.     

Enhancing the Hydrogen Evolution Reaction Activity of Platinum Electrodes in Alkaline Media Using Nickel–Iron Clusters

Herein, we demonstrate an easy way to improve the hydrogen evolution reaction (HER) activity of Pt electrodes in alkaline media by introducing Ni–Fe clusters. As a result, the overpotential needed to achieve a current density of 10 mA cm^?2 in H₂‐saturated 0.1 m KOH is reduced for the model single‐crystal electrodes down to about 70 mV. To our knowledge, these modified electrodes outperform any other reported electrocatalysts tested under similar conditions. Moreover, the influence of 1) Ni to Fe ratio, 2) cluster coverage, and 3) the nature of the alkali‐metal cations present in the electrolyte on the HER activity has been investigated. The observed catalytic performance likely originates from both the improved water dissociation at the Ni–Fe clusters and the subsequent optimal hydrogen adsorption and recombination at Pt atoms present at the Ni–Fe/Pt boundary.