Rigid optically-active D2 and D3 macrocycles

The synthesis and characterization of novel optically-active macrocycles, obtained by esterification reaction from a binaphthyl-containing diol and phthalic or terephthalic acids, and possessing overall D2 or D3 symmetry, is described.     

New taxane derivatives: synthesis of baccatin[14,1-d]furan-2-one nucleus and its condensation with the norstatine side chain

New taxanes 15 and 18, containing the unsaturated and saturated baccatin[14,1-d]furan-2-one nucleus, respectively, were prepared starting from the readily available 13-oxo-7-Tes-baccatin III (3). Sequential formation of the enolate of 3 and reaction with ethyl glyoxylate gave the 13-oxo-7-Tes-baccatin[14,1-d]-3,4-dehydrofuran-2-one 4. The reduction of 4 can result in the formation of a mixture of compounds corresponding to 13-hydroxy alcohol 5 and 13-enol derivative 6. Both 5 and 6 were transformed into 13-oxo-7-Tes-baccatin[14,1-d]furan-2-one 8 by treatment with a base. Further reduction of 8 gave 13-hydroxy compound 9. Esterification of 6 and 9 with N,O-protected norstatine 12, followed by deprotection, gave the new promising anticancer taxanes 15 and 18, respectively.     

Synthesis of [Ir3Rh(CO)12] and Fluxional Behaviour of Some of Its Substituted Derivatives

The redox condensation of [Ir(CO)₄]^–, [Ir(cod)(THF)₂]⁺, and [Rh(cod)(THF)₂]⁺ (cod = cycloocta-1,5-diene) followed by saturation with CO (1 atm) in THF afforded the first synthetic route to pure [Ir₃Rh(CO)₁₂] ( 1 ). Substitution of CO by monodentate ligands gave [Ir₃Rh(CO)₈(μ₂-CO)₃L] (L = Br^–, 2 ; I^–, 3 ; bicyclo[2.2.1]hept-2-ene, 4 ; PPh₃, 5 ). Clusters 2 – 5 have C_s symmetry with the ligand L bound to the basal Rh-atom in axial position. They are fluxional in solution at the NMR time scale due to two CO scrambling processes: the merry-go-round of basal CO's and changes of basal face. An additional process takes place in 5 above room temperature: the intramolecular migration of PPh₃ from the Rh- to a basal Ir-atom. Substitution of CO by polydentate ligands gave [Ir₃Rh(CO)_7–x(μ₂-CO)₃(η⁴-L)x] (L = bicyclo[2.2.1]hepta-2,5-diene (= norbornadiene; nbd), x = 1, 6 ; L = nbd, x = 2, 13 ; L = cod, x = 1, 7 ; L = cod x = 2, 15 ), [Ir₃Rh(CO)₇(μ₂-CO)₃(η²-diars)] (diars = 1,2-phenylenebis-(dimethylarsine); 8 ), [Ir₃Rh(CO)₇(μ₂-CO)₃(η⁴-L)] (L = methylenebis(diphenylphosphine), bonded to 2 basal Ir-atom ( 9a ) or one Ir- and one Rh-atom ( 9b )), [Ir₃Rh(CO)₆(μ₂-CO)₃(η⁴-nbd)PPh₃] ( 12 ), and [Ir₃Rh(CO)₆(μ₂-CO)₃(μ₃-L)] (L = 1,3,5-trithiane, 10 ; L = CH(PPh₂)₃, 11 ). Complexes 6 – 8 , 9a , 10 , and 11 have C_s symmetry, the others C₁ symmetry. They are fluxional in solution due to CO scrambling processes involving 1, 3, or 4 metal centres as deduced from 2D-EXSY spectra. Comparison of the activation energies of these processes with those of the isostructural Ir₄ and Ir₂Rh₂ compounds showed that substitution of Ir by Rh in the basal face of an Ir₄ compound slows the processes involving 3 or 4 metal centres (merry-go-round and change of basal face), but increases the rate of carbonyl rotation about an Ir-atom.     

Contrasting behavior in azide pyrolyses: an investigation of the thermal decompositions of methyl azidoformate, ethyl azidoformate and 2-azido-N, N-dimethylacetamide by ultraviolet photoelectron spectroscopy and matrix isolation infrared spectroscopy

The thermal decompositions of methyl azidoformate (N3COOMe), ethyl azidoformate (N3COOEt) and 2-azido-N,N-dimethylacetamide (N3CH2CONMe2) have been studied by matrix isolation infrared spectroscopy and real-time ultraviolet photoelectron spectroscopy. N2 appears as an initial pyrolysis product in all systems, and the principal interest lies in the fate of the accompanying organic fragment. For methyl azidoformate, four accompanying products were observed: HNCO, H2CO, CH2NH and CO2, and these are believed to arise as a result of two competing decomposition routes of a four-membered cyclic intermediate. Ethyl azidoformate pyrolysis yields four corresponding products: HNCO, MeCHO, MeCHNH and CO2, together with the five-membered-ring compound 2-oxazolidone. In contrast, the initial pyrolysis of 2-azido-N,N-dimethyl acetamide, yields the novel imine intermediate Me2NCOCH=NH, which subsequently decomposes into dimethyl formamide (HCONMe2), CO, Me2NH and HCN. This intermediate was detected by matrix isolation IR spectroscopy, and its identity confirmed both by a molecular orbital calculation of its IR spectrum, and by the temperature dependence and distribution of products in the PES and IR studies. Mechanisms are proposed for the formation and decomposition of all the products observed in these three systems, based on the experimental evidence and the results of supporting molecular orbital calculations.     

Isotope dilution determination of polycyclic aromatic hydrocarbons in olive pomace oil by gas chromatography-mass spectrometry

A gas chromatographic (GC) method with mass spectrometry detection (MS) for the determination of eight polycyclic aromatic hydrocarbons (PAHs) in olive pomace oil has been developed. The oil was diluted with n-pentane and extracted by liquid-liquid partition with dimethyl sulphoxide (DMSO). After water addition and back-extraction with cyclohexane, a thin-layer chromatography on silica gel was performed as a further purification step. The PAHs spot was scraped off from the plate and the final extract was concentrated and analysed by GC-MS in full scan mode. The eight PAHs under investigation were determined in the presence of the corresponding labelled compounds added as internal standards to the sample at the beginning of the analytical process. The identified PAHs were then quantified by the isotope dilution methodology assuring the compensation of the concentration of each analyte for any variation in the sample preparation. The method precision was satisfactory with relative standard deviation (R.S.D.) values in the range 3.6-12.7% for all PAHs. The average recovery rates ranged from 69.0 to 97.5%. Accuracy was also calculated for benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene by analysing a certified reference material (CRM 458, coconut oil) with adequate results. All response curves exhibited a linear fit from 0.1 to 10 microg ml(-1) and the determination coefficients R2 were better than 0.9942. The limits of detection (0.1-0.4 microg kg(-1)) were acceptable when compared with the maximum permitted limit of 2 microg kg(-1) for each of the eight considered PAHs and 5 microg kg(-1) for the sum of the eight PAHs established by the Italian legislation. Measurement uncertainty was finally calculated identifying and quantifying the uncertainty components of the analytical process. The relative expanded uncertainties (Uc), expressed as percent values were in the range 8.5-11.4% thus appropriate for residues quantification in the range of concentrations considered in the present study.     

Functionalization of montmorillonite by acrylamide polymers containing side-chain ammonium cations

Stable polyacrylamide (polyAA)–montmorillonite adducts were prepared by two distinct processes: (1) free radical copolymerization of AA with alkaline clay previously treated with 2-(N-methyl-N,N-diethyl ammonium iodide)ethylacrylate (QD1) and (2) direct interactions of alkaline montmorillonite with various preformed copolymers of AA with QD1. The structure of the adducts as determined by Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and X-ray diffraction was shown to consist of AA macromolecules inserted between lamellar layers whose spacing was larger than in the polymer-free clay. The polymer was strongly attached to the inorganic surfaces, probably due to cooperative formation of electrostatic bonding. The thermal stability of the organic polymers in the resulting complexes was substantially enhanced while the mobility of macromolecules decreased.     

Haplotype studies support slippage as the mechanism of germline mutations in short tandem repeats

Germline mutations of human short tandem repeat (STR) loci are expansions or contractions of repeat arrays which are not well understood in terms of the mechanism(s) underlying such mutations. Although polymerase slippage is generally accepted as a mechanism capable to explain most features of such mutations, it is still possible that unequal crossing over plays some role in those events, as most studies in humans could not exclude unequal crossing over (UCO). Crossing over can be studied by analyzing haplotypes using flanking markers. To check for UCO in mutations, we have analyzed 150 paternity cases for which more than the usual trio (mother, child, and father) were available for testing by analyzing 16 STR loci. In a total of 4900 parent-child allele transfers four mutations were observed at different loci (D8S1179, D18S51, D21S11, and SE33/ACTBP2). To identify the mutated allele and to check for UCO, we typed at least four informative loci flanking the mutated locus and used the pedigree data to establish haplotypes. By doing so we were able to exclude UCO in each case. Moreover, we were able to identify the mutations as one-repeat contractions/expansions. Our data thus support slippage as the mechanism of germline mutations in STRs.     

Oxidation of A 4-Benzoyl-2-Azetidinone by Potassium Peroxomonosulfate

KHSO₅ oxidizes the ketone I to the corresponding benzoate II in satisfactory yield, under very mild conditions. No oxidation of the alcoholic group was detected.