Contribution to the mechanism of liquid membrane oscillators involving cationic surfactant

It is shown that liquid membrane oscillators with cationic surfactants have more complex oscillation patterns than observed previously. The actual details of the oscillations depend strongly on the nature of the membrane material, disclosing even the presence of parallel molecular events. It appears that sampling topology also has a great influence on the observed oscillatory behavior. Variation of oscillation patterns with diffusion path length in the membrane demonstrated the decisive role played by the actual timing of molecular events. The new evidences produced complete usefully the actual views concerning the mechanism of oscillations.     

Can semi-empirical models describe HCl dissociation in water?

We discuss the failure of commonly used AM1 and PM3 semiempirical methods to correctly describe acid dissociation. We focus our analysis on HCl because of its physicochemical importance and its relevance in atmospheric chemistry. The structure of non-dissociated and dissociated HCl – (H₂O) _n clusters is accounted for. The very bad results obtained with PM3 (and also with AM1) are related to large errors in gas-phase proton affinity of water and gas-phase acidity of HCl. Indeed, estimation of pKa values shows that neither AM1 nor PM3 are able to predict HCl dissociation in liquid water since HCl is found to be a weaker acid than H₃O⁺. We have proposed in previous works a modified PM3 approach (PM3-MAIS) adapted to intermolecular calculations. It is derived from PM3 by reparameterization of the core–core functions using ab initio data. Since parameters for H–Cl and O–Cl core–core interactions were not yet available, we have carried out the corresponding optimization. Application of the PM3-MAIS method to HCl dissociation in HCl–(H₂O) _n clusters leads to a huge improvement over PM3 results. Though the method predicts a slightly overestimated HCl acidity in water environment, the overall agreement with ab initio calculations is very satisfying and justifies efforts to develop new semiempirical methods.     

Flow injection turbidimetric determination of thiamine in pharmaceutical formulations using silicotungstic acid as precipitant reagent

A simple flow injection system is proposed for the determination of thiamine in pharmaceutical formulations. The determination is based on the precipitation reaction of thiamine with silicotungstic acid in acidic medium to form a thiamine silicotungstate suspension that is measured at 420 nm. Adding 0.05% (w/v) poly(ethyleneglycol) in the carrier solution (0.5 mol l(-1) hydrochloric acid), an improvement in the sensitivity, repeatability and baseline stability of the flow injection system was obtained. The calibration graph was linear in the thiamine concentration range from 5.0x10(-5) to 3.0x10(-4) mol l(-1) with a detection limit of 1.0x10(-5) mol l(-1). The relative standard deviations for ten successive measurements of 1.0x10(-4) mol l(-1) and 2.5x10(-4) mol l(-1) thiamine were less than 1% and an analytical frequency of 90 h(-1) was obtained.     

C-I stretching vibrations in iodobenzenes

Comparison of the calculated and experimental IR and Raman spectra of a series of iodobenzenes showed that the C-I stretching vibrations for these compounds correspond to a very highly polarized Raman band at 150–270 cm^–1 (=0.1). The position of this band depends on the mass of the para substituent and relative position of the fluorine and iodine atoms in the molecule. The UV absorption spectral data indicate an interaction of the iodine atom and para substituents through the -system. Opposite substituent effects on the change in intensity of the B-band in the UV spectra of iodobenzenes and tetrafluoroiodobenzenes were noted.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2637–2639, November, 1991.     

Derivatives of condensed systems based on pyrimidine,pyrazine, and pyridine

Pyrimido[4,5-b]-1,4-thiazin-6-one and pyrimido[4,5-b]-1,5-thiazepin-6-one derivatives were obtained by reaction of 5-amino-6-chloropyrimidines with thioglycolic acid and 5-amino-6-mercaptopyrimidines with -bromopropionyl chloride. The IR spectra of the compounds are presented.See [1] for communication XXXV.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1332–1335, October, 1977.     

Flavonoids ofArtemisia transiliensis

Conclusions FromArtemisia transiliensis we have isolated a new glycoside and have called it transilin. On the basis of spectral and chemical investigations the structure of 3-O-methylquercetin 7--D-glucopyranoside has been proposed for it.Khimiya Prirodnykh Soedinenii, Vol. 5, No. 4, pp. 236–239, 1969     

Zwitterionic ion chromatography with carboxybetaine surfactant-coated particle packed and monolithic type columns

Both particle packed (25 cm x 0.46 cm I.D. SUPELCOSIL 5 microm C18) and monolithic type (10 cm x 0.46 cm I.D. Merck Chromolith Performance C18) reversed-phase substrates were dynamically coated with a carboxybetaine type zwitterionic surfactant ((dodecyldimethyl-amino) acetic acid) and investigated as stationary phases for use in zwitterionic ion chromatography (ZIC). Investigations into eluent concentration and pH were carried out using KCl eluents containing 0.2 mM of the carboxybetaine surfactant to stabilise the column coatings. It was found that eluent concentration decreased anion retention whilst simultaneously increasing peak efficiencies, which may be due to the dissociation of intra- and inter-molecular salts of the carboxybetaine surfactant under higher ionic strength conditions. The Effect of eluent pH was an increase in anion retention with decreased eluent pH due to the increased protonation of the weak acid terminal group of the carboxybetaine, causing both a relative increase in the positive charge of the stationary phase and less repulsion of the anions by the dissociated weak acid group. The carboxybetaine-coated monolithic phase was applied to rapid anion separations using elevated flow rates and flow rate gradients.     

Tetraphenylphosphonium Diiodobromide: Crystal and Molecular Structure

Complex formation in systems containing 3-carboxypropyltriphenylphosphonium or tetraphenylphosphonium bromide, molecular iodine, and chloroform solution was compared. The maximum number of iodine molecules coordinated by bromides in the solution was established by spectrophotometric method using a function of average iodine number and the stability constants of the complexes were determined. The diiodobromide [(C₆H₅)₄P]BrI₂ was studied by X-ray diffraction analysis. The ab initio calculations were performed for [Y(R)₄]I₃ (Y = N, P, As; R = CH₃, C₆H₅). The obtained experimental data and the correlations with the results of quantum-chemical calculations revealed that the tetraphenylphosphonium cation binds diiodobromide anions through the terminal halogen atoms with equal probability.     

Photometrische Bestimmung von kleinen Mengen Chlorid in Selen, Tellur, Gallium und Wismut

Zusammenfassung Die Probe wird mit Salpetersäure in Gegenwart von Silbernitrat gelöst. Das entstandene Silberchlorid trennt man durch Zentrifugieren ab und zersetzt es anschließend mit Chromschwefelsäure in einer Bestimmungsapparatur. Dabei entstehende flüchtige Chlorverbindungen werden in einer schwefelsauren Kaliumpermanganatlösung zu Chlor oxydiert, das mit o-Tolidin ein gelbes Oxydationsprodukt bildet. Die Extinktion dieser Gelbfärbung wird photometrisch gemessen und die entsprechenden Chloridmengen an Eichgeraden ermittelt. 1–100 g Chlorid können bestimmt werden. Die Standardabweichung beträgt für den Bereich 1–10 ppm maximal ±0,6 ppm Cl und bei der Bestimmung von etwa 200 ppm maximal ± 2,8 ppm Cl.

---

Photometric determination of small amounts of chloride in selenium, tellurium, gallium and bismuth

The sample is dissolved in nitric acid in presence of silver nitrate. The silver chloride is separated by centrifuge and decomposed in a glass equipment by chromosulphuric acid. Resulting volatile compounds of chlorine are oxidized by potassium permanganate in sulphuric acid solution to chlorine, which forms with o-tolidine a yellow oxidation product. The absorbance of this coloration is measured by photometry and corresponding amounts of chloride are found out by calibration curves. 1 to 100 g of chloride can be determined in the range of 1 to 10 ppm Cl with a standard deviation of ±0.6 ppm Cl and at approximately 200 ppm Cl with ± 2.8 ppm Cl.

---

---

Wir danken Herrn Dr. G. Iwantscheff, Forschungslaboratorien der Siemens AG, für wertvolle Anregungen und Herrn Dr. v. Sturm, Forschungslaboratorien der Siemens AG, für die Überlassung von polarographisch ermittelten Chlorgehalten in Selenproben.     

Dual phosphorescence from 5-methylbicyclo[4.3.01,5]non-1-en3-one

Phosphorescence has been simultaneously observed from both a ³π, π* and a ³n,π* level of 5-methylbicyclo-[4.3.0^1,5non-1-en-3-one. The emission from the higher energy ³n,π* state, which is in thermal equilibrium with the ³π,π* state, is quenched by lowering the temperature and also quenched by increasing the solvent polarity so as to raise the energy of the ³n,π* state relative to the ³π,π* state.