Production of antitumoral retamycin during fed-batch fermentations of Streptomyces olindensis

Fed-batch runs were performed in order to correlate the production of retamycin, an anthracycline antibiotic produced by Streptomyces olindensis in submerged cultures, with the specific growth rate. Maximum retamycin production was achieved with an exponential feed rate, controlling the specific growth rate at a low value (0.03 h-1, about 10% of the maximum specific growth rate). Control of the specific growth rate at higher values (0.10 and 0.17 h-1) caused a decrease in antibiotic production. Morphology, assessed by image analysis, was shown to be highly relevant in this process. Cell growth mainly in the form of clumps (90% clumps and 10% free filaments) led to better results than growth as clumps (75%) and free filaments (25%).     

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

A new method for obtaining adsorption isotherms on colloidal suspensions via electrokinetic sonic amplitude measurement

The standard methods for obtaining adsorption isotherms on colloidal suspensions are usually very time consuming and involve a large number of steps and assumptions that increase the experimental errors. In this work, an alternative method is proposed to evaluate the adsorption behavior of electrosteric-stabilized systems based on electrokinetic sonic amplitude signal measurements. The new method, entitled "zeta-sorption", is noticeably less time-consuming when compared to conventional procedures but showed great precision and reliability confirmed by comparison with data obtained from conventional routes on alumina-polyacrylate and alumina-citric acid aqueous suspensions. The experimental conditions that restrict the applicability of the new method were identified and justified by discussing the possible ion exchanges.     

UV index experimental values during the years 2000 and 2001 from the Spanish broadband UV-B radiometric network

An analysis is made of experimental ultraviolet erythemal solar radiation data measured during the years 2000 and 2001 by the Spanish UV-B radiation evaluation and prediction network. This network consists of 16 Robertson-Berger type pyranometers for evaluating solar erythemal radiation and five Brewer spectroradiometers for evaluating the stratospheric ozone. On the basis of these data the Ultraviolet Index (UVI) was evaluated for the measuring stations that are located either in coastal regions or in the more densely populated regions inland on the Iberian Peninsula. It has been checked that in most cases the maximum irradiance values corresponded to solar noon, although there were exceptions that could be explained by cloudiness. The maximum experimental values of the UVI were around 9 during the summer, though frequently passing this value at the inland measurement stations. The annual accumulated dose of irradiation on a horizontal plane has also been studied, as well as the evolution through the year in units of energy, standard erythemal doses and minimum erythemal doses, according to different phototypes.     

Approximate transferability in alkanenitriles

The atomic and bond properties of a series of alkanenitriles were calculated in order to analyze the transferability of the CN, methyl, and methylene groups. The calculations were carried out using the atoms in molecules (AIM) theory on RHF/6‐31++G**// RHF/6‐31G** wave functions obtained for compounds CN–R (R ranging from H to C₁₁H₂₃). Linear correlations between L(Ω) and N(Ω) were used to establish N(CH₂) and N(CH₃) nearly transferable values. Average values and maximum differences to the mean value of several properties were used for classifying the CN group. It shows a transferable behavior along the CN–R series for R>Et. The methyl group presents specific properties when R<Pr. The methylene groups can be classified considering both their position with respect to the end of the chain and the position with respect to the CN group. The atomic energy displays a dependence on the molecular size. Although this behavior does not allow to consider this property as transferable, both the ab initio total electronic molecular energies and the experimental heats of formation can be fitted, by linear regression analysis, as a function of the number of methylene groups. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Ligand-protein docking using a quantum stochastic tunneling optimization method

A novel hybrid optimization method called quantum stochastic tunneling has been recently introduced. Here, we report its implementation within a new docking program called EasyDock and a validation with the CCDC/Astex data set of ligand-protein complexes using the PLP score to represent the ligand-protein potential energy surface and ScreenScore to score the ligand-protein binding energies. When taking the top energy-ranked ligand binding mode pose, we were able to predict the correct crystallographic ligand binding mode in up to 75% of the cases. By using this novel optimization method run times for typical docking simulations are significantly shortened.     

Topological study of intramolecular hydrogen bonding in beta-hydroxyethylperoxy radical and beta-hydroxyethoxy radical along its dissociation pathway

The presence of intramolecular hydrogen bond (IHB) in beta-hydroxyethylperoxy and beta-hydroxyethoxy radicals was investigated using the QTAIM topological study on UB3LYP/6-311++G(2d,2p) charge densities. Only one of the two conformers of beta-hydroxyethylperoxy radical which were previously considered to present IHB displays a bond critical point (BCP) associated to an IHB. Furthermore, the atomic energies and electron populations indicate no evidence of IHB in the second conformer. Nevertheless, very small differences in molecular energies were obtained using several one-step and multi-step methods (G3, G3B3) between both conformers. No BCP is found between the hydroxyl hydrogen and the oxygen in the most stable conformer or in the transition state for the dissociation path of beta-hydroxyethoxy radical. However, a BCP is formed in the last steps of this path, thereby yielding H-bonded products.     

Efficient chiral discrimination by 77Se NMR

[reaction: see text] Several (77)Se NMR experiments were performed by titrating a sample of selenides with the chiral shift reagent methylbenzylamine (MBA), followed by acquisition of (77)Se NMR spectra. Eventually, we observed the appearance of two anisochronous resonances, with a relatively large separation, from 37 to 56 Hz, corresponding to the formation of the diastereomeric complexes. This methodology avoids derivatization processes, and the studied compound can be easily recovered from the NMR tube.     

Successive substitution titration of calcium and magnesium with EGTA using thallium oxide electrode for indication

Summary It is demonstrated that magnesium can be titrated with EGTA in the presence of CaEDTA complex. On the basis of this substitution reaction, calcium and magnesium are successively titrated with EGTA, if an appropriate amount of CaEDTA is added after having reached the end point for calcium. Both end points are indicated amperometrically using a thallium oxide anode. The method has been tested for analysis of tap and mineral water. Larger amounts of manganese(II) render the calcium result too high. Moreover, the indication of both end points is affected by the electrode position of an inactive MnO₂-layer onto the Tl₂O₃-layer. Reducing agents destroy the Tl₂O₃-layer. These interferences can be overcome by addition of an appropriate amount of manganate(VII) to the sample.

---

Sukzessive Substitutionstitration von Calcium und Magnesium mit ÄGTA, indiziert mit der Thalliumoxidelektrode

Zusammenfassung Magnesium kann mit ÄGTA in Gegenwart des CaÄDTA-Komplexes titriert werden. Auf der Grundlage dieser Substitutionstitration können Calcium und Magnesium nacheinander mit ÄGTA titriert werden, wenn nach dem Endpunkt für Calcium eine ausreichende Menge CaÄDTA zugesetzt wird. Beide Endpunkte werden amperometrisch mit Hilfe einer Thalliumoxidelektrode angezeigt. Die Methode wurde an Leitungswasser und Mineralwasser geprüft. Größere Mengen Mangan(II) bewirken zu hohe Calciumwerte. Darüber hinaus wird die Indikation beider Endpunkte dadurch beeinträchtigt, daß sich eine inaktive MnO₂-Schicht auf der Tl₂O₃-Schicht elektrolytisch abscheidet. Reduzierende Stoffe zerstören die Tl₂O₃-Schicht. Diese Störungen können durch Zugabe von Permanganat vermieden werden.