Synthesis, characterisation and solid state structures of α-diimine cobalt(II) complexes: Ethylene polymerisation tests

A series of cobalt(II) compounds of the type [CoX₂(α-diimine)] were synthesised by direct reaction of anhydrous CoCl₂ or CoI₂ and the corresponding α-diimine ligand, in CH₂Cl₂: [CoI₂(o,o′,p-Me₃C₆H₂-DAB)] (1), [CoI₂(o,o′-ⁱPr₂C₆H₃-DAB)] (2), (where Ar-DAB = 1,4-bis(aryl)-2,3-dimethyl-1,4-diaza-1,3-butadiene), and [CoCl₂(o,o′,p-Me₃C₆H₂-BIAN)] (3), [CoCl₂(o,o′-ⁱPr₂C₆H₃-BIAN)] (4), and [CoI₂(o,o′-ⁱPr₂C₆H₃-BIAN)] (5) (where Ar-BIAN = bis(aryl)acenaphthenequinonediimine). All compounds were characterised by elemental analyses, IR, mass spectrometry, and X-ray diffraction whenever possible. The crystal structures of compounds 2-4 showed, in all cases, distorted tetrahedral geometries about the Co, built by two halogen atoms and two nitrogen atoms of the α-diimine ligand. Compounds 3 and 4, as well as [CoCl₂(o,o′,p-Me₃C₆H₂-DAB)] (1a), and [CoCl₂(o,o′-ⁱPr₂C₆H₃-DAB)] (2a), were activated by methylaluminoxane (MAO) and tested as catalysts for ethylene polymerisation, showing low catalytic activities. Selected polyethylene (PE) samples were characterised by ¹H and ¹³C NMR and FT-IR spectroscopies, and by differential scanning calorimetry (DSC), revealing branching microstructures (2.5-5.5%).     

Determination of manganese in diesel,gasoline and naphtha by graphite furnace atomic absorption spectrometry using microemulsion medium for sample stabilization

The determination of Mn in diesel, gasoline and naphtha samples at µg L^− 1 level by graphite furnace atomic absorption spectrometry, after sample stabilization in a three-component medium (microemulsion) was investigated. Microemulsions were prepared by mixing appropriate volumes of sample, propan-1-ol and nitric acid aqueous solution, and a stable system was immediately and spontaneously formed. After multivariate optimization by central composite design the optimum microemulsion composition as well as the temperature program was defined. In this way, calibration using aqueous analytical solution was possible, since the same sensitivity was observed in the optimized microemulsion media and 0.2% v/v HNO₃. The use of modifier was not necessary. Recoveries at the 3 µg L^− 1 level using both inorganic and organic Mn standards spiked solutions ranged from 98 to 107% and the limits of detection were 0.6, 0.5 and 0.3 µg L^− 1 in the original diesel, gasoline and naphtha samples, respectively. The Mn characteristic mass 3.4 pg. Typical relative standard deviation (n = 5) of 8, 6 and 7% were found for the samples prepared as microemulsions at concentration levels of 1.3, 0.8, and 1.5 µg L^− 1, respectively. The total determination cycle lasted 4 min for diesel and 3 min for gasoline and naphtha, equivalent to a sample throughput of 7 h^− 1 for duplicate determinations in diesel and 10 h^− 1 for duplicate determinations in gasoline and naphtha. Accuracy was also assessed by using other method of analysis (ASTM D 3831-90). No statistically significant differences were found between the results obtained with the proposed method and the reference method in the analysis of real samples.     

Aggregation and micellization of sodium dodecyl sulfate in the presence of Ce(III) at different temperatures: a conductometric study

Aggregation properties of sodium dodecyl sulfate (SDS) in the presence of cerium(III) chloride, at various temperatures (298.15-323.15 K) have been measured by the electrical conductance technique. The experimental data on aqueous solutions as a function of SDS concentration show the presence of two inflexion points indicating the presence of two distinct interaction mechanisms: the first, occurring at SDS concentrations below the critical micelle concentration of the pure surfactant, which can be explained by the formation of aggregates between dodecyl sulfate (DS-) and Ce(III), while the second one, at SDS concentrations around the critical micelle concentration (cmc) of the pure surfactant which is due to the SDS micellization. The aggregation between DS- and Ce(III) was confirmed by static light scattering. The binding ratio of DS-/Ce(III) changes from 6 to 4, shows a slight dependence on the Ce(III) concentration and is independent of the temperature. The thermodynamic micellization parameters, Gibbs energy, enthalpy and entropy of micellization were calculated on the basis of the experimental data for the aggregation concentration, and the degree of counterion dissociation of the micelles. The SDS micellization is energetically favoured by increasing either the concentration of CeCl3 or the temperature. Such behaviour is clearly dominated by a decrease of the micellization (exothermic) enthalpy. The entropy of micellization approaches zero as the cerium(III) chloride concentration and temperature increase.     

Local order around rare earth ions during the devitrification of oxyfluoride glasses

Erbium L(3)-edge extended x-ray absorption fine structure (EXAFS) measurements were performed on rare earth doped fluorosilicate and fluoroborate glasses and glass ceramics. The well known nucleating effects of erbium ions for the crystallization of cubic lead fluoride (based on x-ray diffraction measurements) and the fact that the rare earth ions are present in the crystalline phase (as indicated by Er(3+) emission spectra) seem in contradiction with the present EXAFS analysis, which indicates a lack of medium range structural ordering around the Er(3+) ions and suggests that the lead fluoride crystallization does not occur in the nearest neighbor distance of the rare earth ion. Molecular dynamics simulations of the devitrification process of a lead fluoride glass doped with Er(3+) ions were performed, and results indicate that Er(3+) ions lower the devitrification temperature of PbF(2), in good agreement with the experimental results. The genuine role of Er(3+) ions in the devitrification process of PbF(2) has been investigated. Although Er(3+) ions could indeed act as seeds for crystallization, as experiments suggest, molecular dynamics simulation results corroborate the experimental EXAFS observation that the devitrification does not occur at its nearest neighbor distance.     

Influence of fused deposition modeling parameters on the mechanical properties of ABS parts

This work aims to determine the influence of fused deposition modeling (FDM) printing parameters on the mechanical properties of parts fabricated on an Ultimaker2 printer with acrylonitrile butadiene styrene (ABS). The effect of several parameters such as interlayer cooling time (ILCT), nozzle diameter, infill density, raster angle and layer thickness on the ultimate tensile strength, yield strength, and elastic modulus of produced parts was evaluated. Two independent studies were conducted: a first study dedicated to the ILCT and a second study where the influence of other parameters was evaluated through a design of experiments (DoE) approach. Both studies were carried out through the execution of standard tensile tests. The statistical analysis of tensile tests results was processed with the ANOVA methodology. The obtained results indicate that a reduced ILCT improves the tensile strength of parts. It is shown that nozzle diameter and infill density are the parameters that most influence the mechanical properties of ABS, with the upper range selected values improving the studied mechanical properties. The raster angle configuration of (?45^o/45^o) benefits UTS and yield strength of ABS samples. Interactions of nozzle diameter on layer thickness were detected. It was observed that smaller layer thickness promotes a higher elastic modulus and UTS; however, for thinner layers (0.06‐0.10 mm), no significant differences were found on strength of samples due to potential high distortion levels.     

电感耦合等离子体-发射光谱法（ICP-AES）快速测定饮用水中8种微量元素

用电感耦合等离子体-发射光谱法（ICP-AES）同时快速测定饮用水中微量的铜、铅、锌、铁、锰、镉、铬、砷,具有快速、简便、灵敏度高等优点,精密度为1．2％～8．2％（RSD,n=5）．回收率为90％～110％．     

Simultaneous on-line pre-concentration and determination of trace metals in environmental samples by flow injection combined with inductively coupled plasma mass spectrometry using silica gel modified with niobium(V) oxide

This work presents the development of an on-line pre-concentration system for simultaneous determination of Cd, Cu, Ni, V, Zn, Co and Pb in aqueous environmental samples and detection by inductively coupled plasma mass spectrometry. The system is based on cationic retention of the analytes onto a mini-column filled with silica gel modified with niobium(V) oxide. The effects of chemicals and flow variables have been investigated. The optimized operating conditions, selected as a compromise between sensitivity and analytical frequency were: sample pH 7.0, sample flow rate of 6.0mL min(-1), eluent flow rate of 2.0mL min(-1), and eluent (HNO(3)) concentration of 2.5mol L(-1). The relative standard deviation (n=7), enrichment factor and linear working range were 0.8-4.5%, 23.3-37.2 and 0.05-25.0microg L(-1), respectively. Limits of detection were between 0.01 and 0.03microg L(-1). The accuracy of the proposed method was checked with certified materials (NASS-4, NASS-5, CASS-4 and SRM 1643e). Values obtained were in accordance with those reported for the certified materials. Recovery was found to be in the range of 90-110% for a suit of water samples with variable matrices (seawater, tap water and ground water) collected in Florianopolis, Brazil.     

Temperature Effects on the Fracture Dynamics and Elastic Properties of Popgraphene Membranes

Popgraphene (PopG) is a new 2D planar carbon allotrope which is composed of 5–8–5 carbon rings. PopG is intrinsically metallic and possesses excellent thermal and mechanical stability. In this work, we report a detailed study of the thermal effects on the mechanical properties of PopG membranes using fully-atomistic reactive (ReaxFF) molecular dynamics simulations. Our results showed that PopG presents very distinct fracture mechanisms depending on the temperature and direction of the applied stretching. The main fracture dynamics trends are temperature independent and exhibit an abrupt rupture followed by fast crack propagation. The reason for this anisotropy is due to the fact that y-direction stretching leads to a deformation in the shape of the rings that cause the breaking of bonds in the pentagon-octagon and pentagon-pentagon ring connections, which is not observed for the x-direction. PopG is less stiff than graphene membranes, but the Young's modulus value is only 15 % smaller.     

Experimental Evidence of CO2 Photoreduction Activity of SnO2 Nanoparticles

Tin dioxide (SnO₂) has intrinsic characteristics that do not favor its photocatalytic activity. However, we evidenced that surface modification can positively influence its performance for CO₂ photoreduction in the gas phase. The hydroxylation of the SnO₂ surface played a role in the CO₂ affinity decreasing its reduction potential. The results showed that a certain selectivity for methane (CH₄), carbon monoxide (CO), and ethylene (C₂H₄) is related to different SnO₂ hydrothermal annealing. The best performance was seen for SnO₂ annealed at 150 °C, with a production of 20.4 μmol g⁻¹ for CH₄ and 16.45 μmol g⁻¹ for CO, while for SnO₂ at 200 °C the system produced more C₂H₄, probably due to a decrease of surface −OH groups.