CH4 reforming with CO2 for syngas production over La2O3 promoted Ni catalysts supported on mesoporous nanostructured γ-A12O3

Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2 adsorption-desorption, TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2.g-1 and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and Oxide to drv reformin feed increased the methane conversion and led to carbon free ooeration in combined orocesses.     

Morphology of polyaniline nanofibers synthesized under different conditions

Polyaniline nanofibers are readily synthesized by bulk polymerization; ammonium per sulphate (APS) is used as oxidizing agent and hydrochloric acid as dopant without any hard or soft templates. A detailed study was conducted on the effect of a variety of synthetic conditions on the size and morphology of the polyaniline nanostructure. These conditions include the concentration of dopant, and the APS-to-aniline and acid-to-aniline molar ratios. The morphology of the nanofibers was confirmed by SEM and TEM. XRD and FT-IR and UV–visible spectroscopy were used for structural characterization of nanofibers. The results showed that not only the microstructure of the polyaniline product, but also other characteristics, for example conductivity, crystallinity, and, more importantly, the efficiency of the process are strongly affected by the synthetic conditions.     

Green synthesis of benzimidazoloquinazolines and 1,4-dihydropyridines using magnetic cyanoguanidine-modified chitosan as an efficient heterogeneous nanocatalyst under various conditions

Monatshefte für Chemie - Chemical Monthly - In the present study, we demonstrated the synthesis of magnetic cyanoguanidine-modified chitosan (MCGC) as an efficient and green retrievable...     

Fabrication of Electrochemical Sensor Based on CeO2−SnO2 Nanocomposite Loaded on Pd Support for Determination of Nitrite at Trace Levels

Here, an electrochemical sensor based on CeO₂‐SnO₂/Pd was prepared and used for highly selective and sensitive determination of nitrite in some real samples. This nanocomposite was characterized by various methods like X‐ray photoelectron spectroscopy, X‐ray diffraction, energy dispersive spectroscopy, Fourier‐transform infrared spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry. The results showed excellent catalytic property of the nanocomposite as a an electrocatalyst for nitrite oxidation. In the following, the experimental parameters affecting the analytical signal for nitrite were optimized. Under the optimal conditions, the limit of detection and sensitivity of the sensor were calculated as 0.10 μM and 652.95 μA.mM^?1.cm^?2, respectively. Also, the response of the sensor was linear in the range of 0.36 to 2200 μM of nitrite. Finally, some of the inherent features of the sensor such as repeatability, reproducibility and stability were examined after evaluation of the sensor selectivity in the presence of several interfering species.     

Heat transfer enhancement in a counter-flow sinusoidal parallel-plate heat exchanger partially filled with porous media using metal foam in the channels’ divergent sections

Journal of Thermal Analysis and Calorimetry - This is a numerical study of heat transfer and flow in a counter-flow sinusoidal parallel-plate heat exchanger using metal foam in the channels’...     

Computational modeling of porous medium inside a channel with homogeneous nanofluid

Journal of Thermal Analysis and Calorimetry - In the present study, the flow field and heat transfer have been simulated numerically inside a channel. The channel is under the constant heat flux....     

Kinetic Isotope Effect as a Tool To Investigate the Oxygen Reduction Reaction on Pt-based Electrocatalysts – Part II: Effect of Platinum Dispersion

We investigated the oxygen reduction reaction (ORR) mechanism on Pt nanoparticles (NPs) dispersed on several carbon blacks with various physicochemical properties (i. e. specific surface ranging from 80 to 900 m² g⁻¹, different graphitization degree, etc.). Using the kinetic isotope effect (KIE) along with various electrochemical characterizations, we determined that the rate determining step (RDS) of the ORR is a proton-independent step when the density of Pt NPs on the surface of the carbon support is high. Upon decrease of the density of Pt NPs on the surface, the RDS of the ORR starts involving a proton, as denoted by an increase of the KIE >1. This underlined the critical role played by the carbon support in the oxygen reduction reaction electrocatalysis by Pt supported on high surface area carbon.     

Energy level splitting of a 2D hydrogen atom with Rashba coupling in non-commutative space

We explore the non-commutative (NC) effects on the energy spectrum of a two-dimensional hydrogen atom. We consider a confined particle in a central potential and study the modified energy states of the hydrogen atom in both coordinates and momenta of non-commutativity spaces. By considering the Rashba interaction, we observe that the degeneracy of states can also be removed due to the spin of the particle in the presence of NC space. We obtain the upper bounds for both coordinates and momenta versions of NC parameters by the splitting of the energy levels in the hydrogen atom with Rashba coupling. Finally, we find a connection between the NC parameters and Lorentz violation parameters with the Rashba interaction.     

An Efficient Four‐component Synthesis of Spiro[indoline‐pyrazolo[4′,3′:5,6]pyrido[2,3‐d]pyrimidine]triones

A four‐component reaction in the presence of Alum [KAl(SO₄)₂·12H₂O] as an inexpensive and reusable catalyst using the ionic liquid as an effective green reaction media is reported.