Acetylation of Alcohols Catalyzed by Dodeca-tungsto(molybdo)phosphoric acid

Summary. Acetylation of primary, secondary, and tertiary alcohols was carried out in some refluxing alkyl acetates and in two carboxylic acids with the participation of catalytic amounts of H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₁₄P₅W₃₀O₁₁₀ with good yields and high stereo(regio)specificity under mild reaction condition. H₃PW₁₂O₄₀ and H₃PMo₁₂O₄₀ have also shown excellent reactivity in the formylation of 1-butanol with ethyl formate at room temperature and in short reaction times. Heteropolyacid catalysts could be separated after a simple work up and reused for several times.     

Antioxidant Study and Assignments of NMR Spectral Data for 3′,4′,7-Trihydroxyflavanone 3′,7-Di-O-β-D-glucopyranoside (Butrin) and Its Hydrolyzed Product

The NMR spectral data including high resolution ¹H, ¹³C and 2D NMR for butrin, 3,4,7-trihydroxyflavanone 3,7-di-O--D-glucopyranoside, isolated from flowers of Butea monosperma, are reported here for the first time. Butrin was hydrolyzed using b-glucosidase to butin in high yield. They were subjected to free radical scavenging test using 2,2-diphenyl-1-picrylhydrazyl (DPPH) spectrophotometric assay. At a dose of 4 × 10^-8 mol of tested compounds, the percentage of reduced DPPH for butin was 14.5% while no reduction was observed for butrin (0%).     

Thulium(III) Ions Monitoring by a Novel Thulium(III) Microelectrode Based on a S‐N Schiff Base

This study presents for the first time development of a highly selective and sensitive thulium(III) micro‐sensor. Theoretical calculations were conducted on a S‐N Schiff base [thiophene‐2‐carbaldehyde‐(7‐methyl‐1,3‐benzothiazol‐2‐yl) hydrazone] (TCMH) in order to obtain a clue about the tendency of TCMH to Tm(III) and some other metal ions. Then, TCMH was used as a membrane‐active component to prepare a Tm(III)‐selective polymeric membrane microelectrode. In line with the resulting data, the electrode exhibits a Nernstian response toward Tm(III) ions for a very wide concentration range (1.0×10^?11–4.0×10^?6 M) with a detection limit of 1.0×10^?11 (ca. 1.5 ppt) and a very fast response time in the whole concentration range (<5 s). In addition, the results showed that the certain microelectrode could be applied in the pH range of 4.0–11.0 with a usage of more than one month without any considerable potential divergence.     

Highly Sensitive and Selective Determination of Manganese in Tea Leaves by a Catalytic Kinetic Spectrophotometric Method

The catalytic effect of manganese(II) on the oxidation of barium diphenylamine sulfonate (BDAS) with potassium bromate in sulfuric acid was studied. Progress of the reaction was monitored, spectrophotometrically, by measuring absorbance changes at 547.5 nm. A highly sensitive, selective and simple method was accordingly developed for the determination of trace amounts of Mn(II), with no need for a separation or pre‐concentration step. Effects of reaction time, concentration of reagents, temperature and ionic strength on the reaction rate were studied. In the optimized conditions, manganese could be determined in a range of 1 to 60 ng mL^?1 with a detection limit of 0.2 ng mL^?1. The proposed method was successfully applied to the determination of manganese in tea leaves.     

Novel Nitrite Membrane Sensor Based on Cobalt(II) Salophen for Selective Monitoring of Nitrite Ions in Biological Samples

A novel PVC-based membrane sensor based on the Co(II)-salophen complex (CSC) is described. The electrode revealed a Nernstian response over a wide nitrite ion concentration range (1.0×10^–6–1.0×10^–1M). The detection limit of the sensor is 8.0×10^–7M. The best performance was obtained with a membrane composition of 33% PVC, 61% ortho-nitrophenyloctyl ether, 3% cobalt(II)-salophen, and 3% hexadecyltrimethylammonium bromide. The potentiometric response of the sensor is independent of the pH of solution in the pH range 4.5–11.9. The electrode exhibits a very fast response time and good selectivity over a variety of common inorganic and organic anions, including fluoride, bromide, iodide, sulfite, nitrate, thiocyanate, thriiodide and perchlorate. The selectivity behavior of the proposed sensor shows substantial improvements compared to the previously reported electrodes for nitrite ion. The membrane sensor can be used for at least 2 months without any divergence in potential. The electrode was successfully applied to the monitoring of nitrite ion in water, sausage, flour, wheat, cheese and milk.     

Electrocatalytic Oxidation and Voltammetric Determination of Hydrazine on the Tetrabromo‐p‐Benzoquinone Modified Carbon Paste Electrode

The electrochemical properties of hydrazine studied at the surface of a carbon paste electrode spiked with p‐bromanil (tetrabromo‐p‐benzoquinone) using cyclic voltammetry (CV), double potential‐step chronoamperometry and differential pulse voltammetry (DPV) in aqueous media. The results show this quinone derivative modified carbon paste electrode, can catalyze the hydrazine oxidation in an aqueous buffered solution. It has been found that under the optimum conditions (pH 10.00), the oxidation of hydrazine at the surface of this carbon paste modified electrode occurs at a potential of about 550 mV less positive than that of a bar carbon paste electrode. The electrocatalytic oxidation peak current of hydrazine showed a linear dependent on the hydrazine concentrations and linear analytical curves were obtained in the ranges of 6.00×10^?5 M–8.00×10^?3 M and 7.00×10^?6 M–8.00×10^?4 M of hydrazine concentration with CV and differential pulse voltammetry (DPV) methods, respectively. The detection limits (3σ) were determined as 3.6×10^?5 M and 5.2×10^?6 M by CV and DPV methods. This method was also used for the determination of hydrazine in the real sample (waste water of the Mazandaran wood and paper factory) by standard addition method.     

L‐Cysteine Voltammetry at a Carbon Paste Electrode Bulk‐Modified with Ferrocenedicarboxylic Acid

The electrochemical behavior of L ‐cysteine studied at the surface of ferrocenedicarboxylic acid modified carbon paste electrode (FDCMCPE) in aqueous media using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry. It has been found that under optimum condition (pH 8.00) in cyclic voltammetry, the oxidation of L ‐cysteine occurs at a potential about 200 mV less positive than that of an unmodified carbon paste electrode. The kinetic parameters such as electron transfer coefficient, α, and catalytic reaction rate constant, k_h were also determined using electrochemical approaches. The electrocatalytic oxidation peak current of L ‐cysteine showed a linear dependent on the L ‐cysteine concentration and linear analytical curves were obtained in the ranges of 3.0×10^?5 M–2.2×10^?3 M and 1.5×10^?5 M–3.2×10^?3 M of L ‐cysteine concentration with cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods respectively. The detection limits (3σ) were determined as 2.6×10^?5 M and 1.4×10^?6 M by CV and DPV methods.     

Optical Sensing of Cesium Using 1,3-Alternate Calix[4]-mono- and Di(anthrylmethyl)aza-crown-6

We have synthesized two derivatives of alkylanthracene covalently bonded to 1,3-alternate calix[4]aza-crown-6 at the nitrogen position to study the effect of alkali metal ion complexation on the emission properties of anthracene fluorophore. The mono- and dianthryl-substituted probes are weakly fluorescent because their emission is partially quenched by photoinduced electron transfer (PET) from the nitrogen lone pair to the excited singlet state of anthracene. Upon complexation of alkali metal ions (e.g. K⁺, Cs⁺) by the crown moiety, the nitrogen lone pair can no longer participate in the PET process causing an enhancement in the emission of anthracene fluorophore (fluorescent turn on). The maximum fluorescence enhancement observed upon complexation of cesium ions by mono- and dianthryl-substituted calix[4]aza-crown-6 relative to the uncomplexed form was 8.5- and 11.6-fold, respectively.     

Determination of Absolute Configuration of Decipinone,a Diterpenoid Ester with a Myrsinane‐Type Carbon Skeleton,by NMR Spectroscopy

The absolute configuration of decipinone ( 2 ), a myrsinane‐type diterpene ester previously isolated from Euphorbia decipiens, has been determined by NMR study of its axially chiral derivatives (aR)‐ and (aS)‐N‐hydroxy‐2′‐methoxy‐1,1′‐binaphthalene‐2‐carboximidoyl chloride ((aR)‐MBCC ( 3a ) and (aS)‐MBCC ( 3b )). The absolute configurations at C(7) and C(13) of 2 determined were (R) and (S), respectively. Therefore, considering the relative configuration of 2 , the absolute configuration determined was (2S,3S,4R,5R,6R,7R,11S,12R,13S,15R).