Combination of solid-phase extraction-hollow fiber for ultra-preconcentration of some triazole pesticides followed by gas chromatography-flame ionization detection

In this study, an extraction and preconcentration technique using solid-phase extraction (SPE) along with hollow fiber (HF) has been developed as an ultra-preconcentration technique for some triazole pesticides in aqueous samples. Triazole pesticides were employed as model compounds to assess the method and were monitored by gas chromatography-flame ionization detection (GC-FID). Initially, an aqueous solution of target analytes was passed through an RP-8 SPE cartridge and then the adsorbed analytes were eluted with μL amounts of toluene. The collected elute was slowly introduced into an HF that had one end blocked. This allowed precipitation inside the lumen and pores of the HF. Finally, the obtained HF was mounted on a home-made solid-phase microextraction syringe and entered into the GC injection port for thermal desorption-GC analysis. The effect of various experimental parameters including injection port temperature, desorption time, state of HF, washing solvent, elution solvent and its volume, sample volume, etc. were investigated for finding the optimum conditions. The calibration graphs were linear in the ranges of 2-1000 ng/mL (penconazole and hexaconazole), 5-1000 ng/mL (tebuconazole), 15-1000 ng/mL (triticonazole) and the detection limits (LODs) ranged from 0.6 to 4.5 ng/mL. The enhancement factors were in the range of 870-950. The relative standard deviations (RSD%) for five repeated experiments (C=250 ng/mL of each pesticide) varied from 4.5 to 8.7%. The relative recoveries obtained for analytes in grape juice samples, spiked with different levels of each pesticide, were in the range of 87-119%.     

Use of organofunctionalized nanoporous silica gel to improve the lifetime of carbon paste electrode for determination of copper(II) ions

A new functionalized nanoporous silica gel with dipyridyl group (DPNSG) was synthesized. Then, the potentiometric response of the copper(II) ion was investigated at a carbon paste electrode chemically modified with this newly designed functionalized nanoporous silica gel. The electrodes with DPNSG proportions of 15.0% (w/w) demonstrated very stable potentials. Calibration plots with Nernstian slopes for Cu²⁺ were observed, 28.4 (±1.0) mV decade⁻¹, over a wide linear concentration range (1.0 × 10⁻⁷ to 1.0 × 10⁻² M). The electrode exhibited a detection limit of 8.0 × 10⁻⁸ M. Moreover, the selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode presented a response time of ∼50 s, high performance, high sensitivity in a wide range of cation activities and good long-term stability (more than 9 months). The method was satisfactory and was used to determine the copper ion concentration in waste waters, contaminated by this metal.     

An unexpected, novel, three-component reaction between isoquinoline, an isocyanide and strong CH-acids in water

An unexpected three-component condensation reaction between an isocyanide, isoquinoline and a strong CH-acid efficiently provides 1,2-dihydroisoquinoline derivatives in a one-pot reaction in water at 70 °C without using any catalyst.     

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

Chemical and thermal stability of alkanethiol and sulfur passivated InP(100)

InP(100) surfaces treated with Na2Sx9H20 and CnH(2n+1)SH are examined by contact angle measurement, X-ray photoelectron spectroscopy, and atomic force microscopy to determine the chemical and thermal behavior of these passivated surfaces. The surfaces coated by octadecanethiol (n = 18) self-assembled monolayers (SAMs) are found to be more stable toward oxidation than the S-passivated surface. The chemical stability of octadecanethiol SAMs in various environments is examined. The thiol monolayer is found to be stable in 0.1 M HCl but degrades in 0.1 M NaOH, boiling chloroform, and water. The behavior of these surfaces at elevated temperatures under a vacuum is also investigated. The octadecanethiol-coated InP(100) is stable up to 473 K, above which the films begin to degrade. Unlike other substrates on which the entire molecule including the sulfur headgroup desorbs together, on InP, the sulfur headgroup remains on the surface even after annealing to 673 K. These observations suggest that the desorption occurs by S-C bond cleavage as well as In-S bond cleavage. The sulfur of S-passivated InP is found to be more thermally stable than that of the octadecanethiol monolayer, perhaps due to their different bonding geometries and hence energies.     

Voltammetric sensor for nitrite determination based on its electrocatalytic reduction at the surface of p-duroquinone modified carbon paste electrode

A p-duroquinone (tetramethyl-p-benzoquinone) modified carbon paste electrode (DMCPE) was employed to study the electrocatalytic reduction of nitrite in aqueous solutions using cyclic voltammetry (CV), double potential-step chronoamperometry, and differential pulse voltammetry (DPV). It has found that under an optimum condition (pH 1.00), the reduction of nitrite at the surface of DMCPE occurs at a potential of about 660 mV less negative than that of an unmodified carbon paste electrode (CPE). The catalytic rate constant, k′_h, based on Andrieux and Saveant theoretical model was calculated as for scan rate 10 mV s^-1. Also, the apparent diffusion coefficient, D _app, was found as 2.5 × 10^–10 and 3.61 × 10^–5 cm² s^-1 for p-duroquinone in carbon paste matrix and nitrite in aqueous buffered solution, respectively. The values for αn_α were estimated to be −0.65 and −0.19 for the reduction of nitrite at the surface of DMCPE and CPE, respectively. The electrocatalytic reduction peak currents showed a linear dependence on the nitrite concentration, and a linear analytical curve was obtained in the ranges of 5.0 × 10^–5 M to 8.0 × 10^–3 M and 6.0 × 10^–6 M to 8.0 × 10^–4 M of nitrite concentration with CV and DPV methods, respectively. The detection limits (2σ) were determined as 2.5 × 10^–5 M and 4.3 × 10^–6 M by CV and DPV methods. This method was also applied as a simple, selective and precise method for determination of nitrite in real samples (the weak liquor from the wood and paper factory of Mazandaran province in Iran) by using a standard addition method.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Luciferin‐Regenerating Enzyme Mediates Firefly Luciferase Activation Through Direct Effects of D‐Cysteine on Luciferase Structure and Activity

Luciferin‐regenerating enzyme (LRE) contributes to in vitro recycling of D‐luciferin. In this study, reinvestigation of the luciferase‐based LRE assay is reported. Here, using quick change site‐directed mutagenesis seven T‐LRE (Lampyris turkestanicusLRE) mutants were constructed and the most functional mutant of T‐LRE (T⁶⁹R) was selected for this research and the effects of D‐ and L‐cysteine on T⁶⁹R T‐LRE‐luciferase‐coupled assay are examined. Our results demonstrate that bioluminescent signal of T⁶⁹R T‐LRE‐luciferase‐coupled assay increases and then reach equilibrium state in the presence of 5 mm D‐cysteine. In addition, results reveal that 5 mm D‐ and L‐cysteine in the absence of T⁶⁹R T‐LRE cause a significant increase in bioluminescence intensity of luciferase over a long time as well as decrease in decay rate. Based on activity measurements, far‐UV CD analysis, ANS fluorescence and DLS (Dynamic light scattering) results, D‐cysteine increases the activity of luciferase due to weak redox potential, antiaggregatory effects, induction of changes in conformational structure and kinetics properties. In conclusion, in spite of previous reports on the effect of LRE on luciferase bioluminescent intensity, the majority of increase in luciferase light output and time‐course originate from the direct effects of D‐cysteine on structure and activity of firefly luciferase.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.