Synthesis and microstructural study of stereoblock elastomeric polypropylenes from metallocene catalyst (2‐PhInd)2ZrCl2 activated with cocatalyst mixtures

Various elastomeric polypropylenes (PPs) are synthesized through homogeneous propylene polymerization with metallocene catalyst (2‐PhInd)₂ZrCl₂ in the presence of different cocatalyst mixtures: triethylaluminum (TEA)/methylaluminoxane (MAO) or triisobutylaluminum (TIBA)/MAO in the range of Al_AlR3/Al_MAO = 0.0–0.9. The cocatalyst formulation impacts the resultant polymer microstructure and the thermal and dynamic mechanical properties of the produced PPs. ¹³C NMR analysis of the polymers reveals essentially atactic PP, with mmmm = 7.9%, when Al_AlR3/Al_MAO = 0.0. The mmmm pentad content is maximized when Al_AlR3/Al_MAO = 0.8; for TIBA, mmmm = 23.5%; and for TEA, mmmm = 17.6%. Differential scanning calorimetry analysis and dynamic mechanical thermal analysis corroborate these findings. Specifically, T_m, ΔH_m, and T_g are essentially maximized under these conditions, and the minimum damping is observed for Al_AlR3/Al_MAO = 0.6–0.8. ¹H NMR analysis of the mixtures of catalyst and cocatalysts (without monomer) shows very minor differences for [Zr]:Al_AlR3 in the range of 1:1–1:5. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A simple and efficient large-scale synthesis of 3-hydroxyphthalans via oxa-Pictet-Spengler reaction catalyzed by nanosilica sulfuric acid

Nanosilica sulfuric acid is found to be a new, powerful and reusable heterogeneous catalyst for the rapid synthesis of 3-hydroxyphthalans via condensation of aromatic aldehydes and 3-hydroxybenzyl alcohols under conventional heating and microwave irradiation. Scale-up preparation of these heterocycles is also carried out.     

Curvilinear smoothed particle hydrodynamics

We suggest a new set of equations to employ smoothed particle hydrodynamics (SPH) in a curvilinear space, and we refer to it as curvSPH. In classical SPH, the horizontal and vertical resolution of discretization is supposed to be equal for fluid particles. However, curvSPH makes the horizontal and vertical resolutions independent from each other. This is performed by transformation of physical space into an appropriate computational space with a different scale in horizontal and vertical directions. Solving a problem using SPH in a curvilinear space also provides capability to model curved boundaries as straight lines. In classical SPH, special care is needed to reach a uniform mass distribution along curved boundaries; however, producing uniform mass distribution along a line using curvSPH is straight forward. Different simulations, including simulation of a flip bucket are performed to demonstrate the applicability of the proposed method. Good agreement of results with experimental data and classical SPH confirms the capabilities of curvSPH. Copyright © 2016 John Wiley & Sons, Ltd.     

Production and evaluation of a 67Ga-labeled anti-Ror1 monoclonal antibody in a mouse model of breast cancer

Journal of Radioanalytical and Nuclear Chemistry - Receptor tyrosine kinase Ror1 is widely expressed during embryogenesis but it is absent within most mature tissues. However, expression of Ror1...     

Monitoring of Methyldopa by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10－7—1.0×10－11 mol•L－1 (r＝0.9975) with a limit of detection and quantitation 0.004 nmol•L－1 and 0.03 nmol•L－1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered.     

Sm3+ Potentiometric Membrane Sensor as a Probe for Determination of Some Pharmaceutics

The increase use of ion sensors in the fields of environmental, agricultural, and medical analysis is stimulating analytical chemists to develop new sensors for fast, accurate, reproducible, and selective determination of various ions. In this study a new samarium membrane sensor was constructed and for the first time, it was applied as a probe in indirect determination of hyoscine, homatropine, and tramadol drugs in their pharmaceutical formulation. The proposed membrane sensor was constructed based on a membrane containing 2% sodium tetraphenyl borate (NaTPB) as an anionic additive, 63% dibutyl phthalate (DBP) as solvent mediator, 5% ionophore, and 30% poly(vinyl chloride) (PVC). The proposed Sm(III) electrode exhibits a Nernstian response of 19.35±0.2 mV per decade of samarium concentration, and has a lower detection limit of 1.0×10^?7 M. The linear range of the sensors was 1.0×10^?7–1.0×10^?1 M. It works well in the pH range of 3.0–8.0.     

Light-induced dehydrogenation of 3,4-dihydropyrimidin-2(1H)-ones

Abstract  

UV light irradiation of Biginelli 3,4-dihydropyrimidin-2(1H)-ones in chloroform in an argon atmosphere leads to dehydrogenation of these compounds to their corresponding pyrimidin-2(1H)-ones in excellent yields. Irradiation in the same solvent under an oxygen atmosphere generates, in addition, various hitherto unidentified products. A light-induced electron transfer from the substrate to the solvent is proposed as the initial event, supported by the detection of dichloromethane and hydrogen chloride in the photolysate.