Photocatalytic Activity of High Aspect Ratio TiO2 Nanorods

In this article, TiO₂ nanorods (aspect ratio >20) were prepared through a polyol process and doped with metal ions (Cu²⁺, Ni²⁺, Fe³⁺, and Cr³⁺). Compared with TiO₂ nanoparticles, the TiO₂ nanorods displayed relatively higher photocatalytic activity for the degradation of copper sulfophthalocyanine. Moreover, the photocatalytic activity was greatly enhanced when the metal ions were doped in the TiO₂ nanorods.     

Temperature Effect on the Phase Behavior of the Systems Water/Sucrose Laurate/Ethoxylated‐mono‐di‐glyceride/Oil

The phase behavior of the systems water/sucrose laurate/ethoxylated mono‐di‐glyceride/oil was investigated as function of temperature and the weight ratio of EMDG in the mixed surfactants. The oils were R (+)‐limonene, isopropylmyristate, and caprylic‐capric triglyceride. This study demonstrates that the phase inversion temperature (PIT) decreases and the efficiency of the mixed surfactants (γ¯) increase as the weight ratio of the EMDG in the mixed surfactants increases. R (+)‐limonene gave lower phase inversion temperatures and higher efficiencies compared to isopropylmyristate, and caprylic‐capric triglyceride. The solubilization capacity of the system water/sucrose laurate/oil increased upon the addition of ethoxylated mono‐di‐ glyceride which stabilize the surfactant layer and increase the interfacial area.     

Electrical Property of Tin Oxide Doped with Multi‐Walled Carbon Nanotubes

Tin oxide doped with multi‐walled carbon nanotubes (MWNTs) was prepared via a wet‐chemical process and characterized with x‐ray diffraction (XRD) and transmission electron microscope (TEM). Meanwhile, the conductivity of composites obtained was measured using Source Meter. The results show that carbon nanotubes have great effect on the electrical property of SnO₂ nanoparticles. Compared with undoped SnO₂ nanoparticles, the resistivity of SnO₂ nanoparticles doped with 0.3‰ wt MWNTs decreased by a factor of 37. This may be ascribed to the presence of π energy levers of MWNTs and their high aspect ratio. Moreover, the effect of annealing temperature on the electrical property of SnO₂ nanoparticles doped with MWNTs also was discussed.     

Synthesis of Some Oil Spill Dispersants Based on Sorbitol Esters and Their Capability to Disperse Crude Oil on Seawater to Alleviate Its Accumulation and Environmental Impact

In this respect mono‐, di‐, and tri‐ sorbitol oleate esters [SMO, SDO, and STO] were prepared and then ethoxylated using ethylene oxide to obtain six sorbitol esters at different ethylene oxide content (e.o=5, 12, 15, 20, 35, and 45). They were tested as oil spill dispersants individually and in blends. From the obtained data, it was found that the blends are more effective than the corresponding individual surfactants. The maximum dispersion capability for the prepared surfactants was obtained at HLB range from 9 to 11 for the both individual surfactants and blends. The increase of total carbon number in the surfactant alkyl group leads to increase dispersion capability of the dispersant. The wide range of ethylene oxide content was used, but the maximum dispersion efficiency was obtained at ethylene oxide=20 in E(20)STO. Meanwhile, the dispersion capability increases when the interfacial tension decreases.     

CFD Simulation of Rheological Model Effect on Cuttings Transport

Foam, as a non-Newtonian fluid, plays an important role in the underbalanced drilling technique in oil field development. The rheological properties of drilling fluids, such as foam, have a direct effect on flow characteristics and hydraulic performance. Two rheological models—the Herschel–Bulkley model and power law—were fitted to two foam systems in this study. Computational fluid dynamics (CFD) was used to simulate the effect of the rheological models on solid–liquid (cuttings transport) hydraulics in concentric and eccentric annulus during the foam drilling operation. The simulation results are compared to the experimental data from previous studies. The results of CFD using the power law model are in good agreement with experimental results in horizontal annulus with respect to the Herschel–Bulkley model with relative error less than 8%. Thus, for CFD cuttings transport for simulations in inclined and horizontal annulus, it is best to use the power law's rheological model parameters.     

Facile Conversion of Epoxides to Thiiranes with Ammonium Thiocyanate Catalyzed with Oxalic Acid

Epoxids are efficiently converted to the corresponding thiiranes by ammonium thiocyanate (NH 4 SCN) in the presence of catalytic amounts of oxalic acid with excellent isolated yields under mild and nonaqueous reaction conditions. This conversion performed under both conventional heating and microwave conditions. Distinct rate enhancement is observed under microwave irradiation.     

Ab Initio Study of Structures,Metallotropic 1,2-Shifts and Prototropic 1,2-Shifts of Cyclopentadienyl(trimethyl)silane, -germane and -stannane

Molecular structures, metallotropic and prototropic shifts of cyclopentadienyl(trimethyl)silane ( 1 ), cyclopentadienyl(trimethyl)germane ( 2 ), and cyclopentadienyl(trimethyl)stannane ( 3 ) were investigated using ab initio molecular orbital and the Becke, Lee, Yang, and Parr density functional (B3LYP) methods. The results show that the most stable structure of compounds 1-3 has the (CH 3 ) 3 M fragment in the allylic position. The energy barrier of metallotropic shifts in compound 1 is higher than in 2 , and in compound 2 higher than in 3 , in good agreement with experimental data. The cyclopentadienyl rings in compounds 1-3 are found to be planar but this result contradicts the reported experimental data.     

Efficient Chemoselective Mild Deprotection of S,Sand S,O-Acetals and Ketals with Electrophilic Halogens

A novel and simple method for the chemoselective deprotection of S,S- and S,O-acetals and ketals in the presence of their O,O-analogs with electrophilic halogens to their corresponding carbonyl compounds is described using N-bromosuccinimide, N-chlorosuccinimide, 2,4,4,6-tetrabromo-2,5-cyclohexen-1-one, trichlorocyanuric acid, or molecular bromine in aqueous acetonitrile. The use of these reagents in the presence of hydrated silica gel provide efficient, novel, and mild procedures for the deprotection of cyclic and acyclic O,O-, S,S-, and S,O-acetals and ketals in excellent yields in short reaction times.     

Applying magnetic soft mold imprint technology with ultraviolet light‐emitting‐diode array on the fabrication of microlens arrays

This study proposed a novel technology, which uses exposed technology with ultraviolet light‐emitting‐diode (UV‐LED) arrays and the polydimethylsiloxane (PDMS) magnetic flexible soft mold imprint technology, to develop exposed equipments with UV‐LED arrays. This study used magnetic soft mold imprint technology to replicate the structure of microlens, providing a more effective alternative for imprint technology and application. The measurement results showed that PDMS with magnetic iron powder can precisely cast mold to replicate the structures of microlens. Electromagnetic plates were used to control even imprinting with magnetic force, in order to fill the mold of micro‐structure of the photo‐resist. Magnetic iron powder was added to PDMS to produce composite material, which can effectively avoid the transformation of pure PDMS during soft mold imprinting, and increase mechanical strength. Magnetic PDMS soft mold is easy to make, and the casting time is short, so that costs can be effectively reduced. Also with advantages of less free energy on its surface, and unlikely to adhere to the photo‐resist during imprinting, it can be combined with electromagnetic plates evenly to control the magnetic soft mold. This imprinting technology is a big advantage to the production process of micro‐structures during imprinting. Copyright © 2009 John Wiley & Sons, Ltd.     

Photoconductivity of C60‐doping benzocarbazole‐substituted polysiloxanes on an operating wavelength of 633 nm

A novel polysiloxane having benzo[a]carbazole, benzo[a,i]carbazole, and benzo[a,g]carbazole pendant groups has been synthesized and characterized. We studied the electric‐field‐induced xerographic properties, the photogeneration efficiency, and the photoconductivity of C₆₀‐doping polymeric composites at a wavelength of 633 nm. C₆₀‐doping with benzo[a,g]carbazole‐substituted polysiloxane shows a photogeneration efficiency of 56.55 × 10^?5 and a photoconductivity of 52.2 pS/cm at E = 100 V/µm, which was found to be higher than that of the other benzocarbazole‐substituted polysiloxane composites. Copyright © 2009 John Wiley & Sons, Ltd.