Microwave-assisted rapid and efficient deprotection and direct esterification and silylation of MOM and EOM ethers catalyzed by [Hmim][HSO4] as a Br?nsted acidic ionic liquid

Abstract  

1-Methylimidazolium hydrogensulfate, [Hmim][HSO₄], a Br?nsted acidic room temperature ionic liquid, is used as a catalyst and reaction medium for facile and eco-friendly deprotection of methoxymethyl (MOM) and ethoxymethyl (EOM) ethers to their corresponding alcohols under thermal conditions (Δ) and microwave irradiation (MW). Furthermore, one-pot interconversion to the respective acetates and trimethylsilyl (TMS) ethers was also achieved.     

Mid-infrared spectroscopy for detection of Huanglongbing (greening) in citrus leaves

In recent years, Huanglongbing (HLB) also known as citrus greening has greatly affected citrus orchards in Florida. This disease has caused significant economic and production losses costing about $750/acre for HLB management. Early and accurate detection of HLB is a critical management step to control the spread of this disease. This work focuses on the application of mid-infrared spectroscopy for the detection of HLB in citrus leaves. Leaf samples of healthy, nutrient-deficient, and HLB-infected trees were processed in two ways (process-1 and process-2) and analyzed using a rugged, portable mid-infrared spectrometer. Spectral absorbance data from the range of 5.15-10.72 μm (1942-933 cm⁻¹) were preprocessed (baseline correction, negative offset correction, and removal of water absorbance band) and used for data analysis. The first and second derivatives were calculated using the Savitzky-Golay method. The preprocessed raw dataset, first derivatives dataset, and second derivatives dataset were first analyzed by principal component analysis. Then, the selected principal component scores were classified using two classification algorithms, quadratic discriminant analysis (QDA) and k-nearest neighbor (kNN). When the spectral data from leaf samples processed using process-1 were used for data analysis, the kNN-based algorithm yielded higher classification accuracies (especially nutrient-deficient leaf class) than that of the other spectral data (process-2). The performance of the kNN-based algorithm (higher than 95%) was better than the QDA-based algorithm. Moreover, among different types of datasets, preprocessed raw dataset resulted in higher classification accuracies than first and second derivatives datasets. The spectral peak in the region of 9.0-10.5 μm (952-1112 cm⁻¹) was found to be distinctly different between the healthy and HLB-infected leaf samples. This carbohydrate peak could be attributed to the starch accumulation in the HLB-infected citrus leaves. Thus, this study demonstrates the applicability of mid-infrared spectroscopy for HLB detection in citrus.     

Automated Conductometry Measurements of Simple Electrolytes and Micellar Solutions Using a Voltage Divider Technique

A new automated technique was developed for online monitoring of the conductance of a conductive type of cell. Shining metal electrodes were used for the conductometry measurements and the frequency of the input signal was swept from a few hertz to 1 MHz. A theoretical model was developed based on the voltage dividing technique. The model was in good agreement with the experimental results. Conductances of simple electrolytes such as HCl and micellar solutions were compared. Solutions of HCl with concentrations as low as 45 μmol⋅L⁻¹ were investigated. Critical micellar concentrations of two types of micelles, SDS and CPC, were also measured. It was shown that this voltage divider circuit can be used for automated online conductometric titrations.     

Effect of the polymeric coating over Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> particles used for magnetic separation

In this work, the synthesis of magnetite nanoparticles by two variant chemical coprecipitation methods that involve reflux and aging conditions was investigated. The influence of the synthesis conditions on particle size, morphology, magnetic properties and protein adsorption were studied. The synthesized magnetite nanoparticles showed a spherical shape with an average particle size directly influenced by the synthesis technique. Particles of average size 27 nm and 200 nm were obtained. When the coprecipitation method was used without reflux and aging, the smallest particles were obtained. Magnetite nanoparticles obtained from both methods exhibited a superparamagnetic behavior and their saturation magnetization was particle size dependent. Values of 67 and 78 emu g⁻¹ were obtained for the 27 nm and 200 nm magnetite particles, respectively. The nanoparticles were coated with silica, aminosilane, and silica-aminosilane shell. The influence of the coating on protein absorption was studied using Bovine Serum Albumin (BSA) protein.      

Chitosan-mediated in situ biomolecule assembly in completely packaged microfluidic devices

We report facile in situ biomolecule assembly at readily addressable sites in microfluidic channels after complete fabrication and packaging of the microfluidic device. Aminopolysaccharide chitosan's pH responsive and chemically reactive properties allow electric signal-guided biomolecule assembly onto conductive inorganic surfaces from the aqueous environment, preserving the activity of the biomolecules. A transparent and nonpermanently packaged device allows consistently leak-free sealing, simple in situ and ex situ examination of the assembly procedures, fluidic input/outputs for transport of aqueous solutions, and electrical ports to guide the assembly onto the patterned gold electrode sites within the channel. Both in situ fluorescence and ex situ profilometer results confirm chitosan-mediated in situ biomolecule assembly, demonstrating a simple approach to direct the assembly of biological components into a completely fabricated device. We believe that this strategy holds significant potential as a simple and generic biomolecule assembly approach for future applications in complex biomolecular or biosensing analyses as well as in sophisticated microfluidic networks as anticipated for future lab-on-a-chip devices.     

The effect of corona discharge on free convection heat transfer from a horizontal cylinder

Free convection heat transfer from an isothermal horizontal cylinder in the presence of DC positive corona discharge with a blade edge emitter electrode has been studied experimentally and numerically. A Mach–Zehnder interferometer was used to determine the local Nusselt numbers. The effect of corona discharge on heat transfer from the cylinder was investigated at Rayleigh numbers in the range between 1500 and 5000. To find the details of the flow patterns and to further verify the experimental results, numerical simulations were also performed. It was found that the numerical results are in good agreement with experimental data. By increasing the applied voltage up to 15.5 kV, the corona discharge generates a recirculation zone around the blade and below the lower stagnation point of the cylinder. The effect of the recirculation zone becomes stronger near the breakdown voltage (17 kV) and it is responsible for a local decrease in the cooling of the cylinder around the lower stagnation point. The results indicate that corona discharge has a significant effect on the average Nusselt number at lower Rayleigh numbers whereas it has smaller effect at higher Rayleigh numbers.     

Generating of quadratic gray scale beam profile using binary gray scale masks

Generating beams with a desired quadratic lateral intensity distribution using 1D binary masks was analyzed, in detail. Effect of width of the first bar as well as the gray scale increment rate on the generated shaped beam was examined. It is shown that increasing the gray scale rate produces smoother and broaden profile. Besides, it was demonstrated that width of the first bar has great impact on the generated profile, so by increasing the width, the generated profile becomes sharper. Theoretical results are confirmed by experiment, as well.     

Devitrification behaviour of Cu-Zr-Ti-Pd bulk glassy alloys

The glass formation, mechanical properties and devitrification of the Cu-Zr-Ti-Pd glassy alloys are studied. The formation of a nanoscale icosahedral phase in Cu-based alloys is observed. The nanoscale particles with icosahedral symmetry are primarily formed in the Cu-Zr-Ti-Pd glassy alloys in the initial stage of the devitrification process. As the icosahedral phase is metastable it transforms to the equilibrium oC68 (Cu, Pd)₁₀(Zr, Ti)₇ single phase or its mixture with the oP44 Cu₈Zr₃ phase, depending upon the alloy composition, through an intermediate crystalline compound. The structure changes on heating were studied by X-ray diffraction, transmission electron microscopy, differential scanning calorimetry and isothermal calorimetry.