Joule heating in packed capillaries used in capillary electrochromatography

Effective heat dissipation is critical for reproducible and efficient separations in electrically driven separation systems. Flow rate, retention kinetics, and analyte diffusion rates are some of the characteristics that are affected by variation in the temperature of the mobile phase inside the column. In this study, we examine the issue of Joule heating in packed capillary columns used in capillary electrochromatography (CEC). As almost all commonly used CEC packings are poor thermal conductors, it is assumed that the packing particles do not conduct heat and heat transfer is solely through the mobile phase flowing through the system. The electrical conductivity of various mobile phases was measured at different temperatures by a conductivity meter and the temperature coefficient for each mobile phase was calculated. This was followed by measurement of the electrical current at several applied voltages to calculate the conductivity of the solution within the column as a function of the applied voltage. An overall increase in the conductivity is attributed to Joule heating within the column, while a constant conductivity means good heat dissipation. A plot of conductivity versus applied voltage was used as the indicator of poor heat dissipation. Using theories that have been proposed earlier for modeling of Joule heating effects in capillary electrophoresis (CE), we estimated the temperature within CEC columns. Under mobile and stationary phase conditions typically used in CEC, heat dissipation was found to be not always efficient. Elevated temperatures within the columns in excess of 23 degrees C above ambient temperature were calculated for packed columns, and about 35 degrees C for an open column, under a given set of conditions. The results agree with recently published experimental findings with nuclear magnetic resonance (NMR) thermometry, and Raman spectroscopic measurements.     

Theoretical calculation of electrode potentials: Electron-withdrawing compounds

The electrode potential of 2,3-dicyanobenzoquinone in aqueous solution has been calculated relative to parabenzoquinone using a thermodynamic cycle approach that includes accurate gasphase ab initio calculations and calculation of differences in free energies of hydration using the free-energy perturbation method. The discrepancy between the calculated and experimental electrode potential is disappointingly large (99 mV) compared to previous studies using this approach. This, along with the experimental evidence, suggests that the experimental value itself is too large and that theoretical approaches may indeed be as reliable as experimental ones for determining redox properties of molecules such as 2,3-dicyanobenzoquinone. In the light of this discrepancy we have examined the variation of the results with the basis set, inclusion of electron correlation and changes in the parameters used in the molecular dynamics free-energy simulations. The results are shown to be dependent upon the torsional parameters and especially dependent upon the basis set or semiempirical method used to obtain the electrostatic potential-derived charges. The best charge set was determined using the ab initio criteria of completeness—as far as it can be applied to large molecules—and also by studying the effect of hydration on these charges. This was done by allowing the solvent to perturb the wave function prior to the electrostatic potential determination. Thus, 3-21G and 6-31G * basis sets were found to give satisfactory results. Similar results were obtained using semiempirical and ab initio geometries.     

Novel Bis-arylPheDOT Synthons for Electrochromic Polymers

Two terthiophenes incorporating the synthon 3,4-(1,2-phenylenedioxy)thiophene (PheDOT) have been developed. Specifically, 2,5-bisthienyl-3,4-(1,2-phenylenedioxy)thiophene (BTh-PheDOT 1) and 2,5-bisethylenedioxythienyl-3,4-(1,2-phenylenedioxy)thiophene (BEDOT-PheDOT 2) were electropolymerized to form electroactive polymer films (P1 and P2) that switched between two highly colored states with the more electron-rich EDOT derivative P2 observed to switch at a lower potential. Additionally, both P1 and P2 displayed moderate to low optical bandgaps of 1.8 and 1.6 eV, respectively. Crystal structures of BTh-PheDOT showed the monomer to be nearly planar with π -stacking observable between monomers. These findings demonstrate the potential of PheDOT as an electroactive synthon for the formation of well-ordered systems.     

A Short and Efficient Stereoselective Synthesis of the Potent 5-Lipoxygenase Inhibitor CMI-977

A short and efficient synthesis of the potent 5-lipoxygenase inhibitor CMI-977 is described using as the key step a stereoselective anomeric oxygen to carbon rearrangement of an alkynyl stannane tetrahydrofuranyl ether derivative mediated by boron trifluoride etherate.     

Hybrid Curdlan Poly(γ ‐Glutamic Acid) Nanoassembly for Immune Modulation in Macrophage

A nanoformulation composed of curdlan, a linear polysaccharide of 1,3‐β‐linked d ‐glucose units, hydrogen bonded to poly(γ ‐glutamic acid) (PGA), was developed to stimulate macrophage. Curdlan/PGA nanoparticles (C‐NP) are formulated by physically blending curdlan (0.2 mg mL^?1 in 0.4 m NaOH) with PGA (0.8 mg mL^?1). Forster resonance energy transfer (FRET) analysis demonstrates a heterospecies interpolymer complex formed between curdlan and PGA. The ¹H‐NMR spectra display significant peak broadening as well as downfield chemical shifts of the hydroxyl proton resonances of curdlan, indicating potential intermolecular hydrogen bonding interactions. In addition, the cross peaks in ¹H‐¹H 2D‐NOESY suggest intermolecular associations between the OH‐2/OH‐4 hydroxyl groups of curdlan and the carboxylic‐/amide‐groups of PGA via hydrogen bonding. Intracellular uptake of C‐NP occurs over time in human monocyte‐derived macrophage (MDM). Furthermore, C‐NP nanoparticles dose‐dependently increase gene expression for TNF‐α, IL‐6, and IL‐8 at 24 h in MDM. C‐NP nanoparticles also stimulate the release of IL‐lβ, MCP‐1, TNF‐α, IL‐8, IL‐12p70, IL‐17, IL‐18, and IL‐23 from MDM. Overall, this is the first demonstration of a simplistic nanoformulation formed by hydrogen bonding between curdlan and PGA that modulates cytokine gene expression and release of cytokines from MDM.     

On the dynamics of turbulent vortical flow

Zusammenfassung Die Wirbelströmung in einer turbulenten kompressiblen Flüssigkeit wird behandelt. Die Bewegungsgleichungen werden durch die Vernachlässigung der kleineren Glieder vereinfacht. Die experimentellen Ergebnisse erlauben eine Fehlerrechnung für einen Fall. Ein wichtiger Schritt in der Vereinfachung ist die Voraussetzung, dass die Radialgradienten viel grösser sind als die Axialgradienten. Für die kräftigen Wirbel erwies sich diese Annahme sowohl durch die Erfahrung als auch aus den wesentlichen theoretischen Betrachtungen heraus als begründet. Die vereinfachten Gleichungen zeigen einige wichtige Aspekte der schnelldrehenden Strömungen und geben einen Anhaltspunkt für die ausführlicheren Studien.

---

Notation r radial co-ordinate - z axial co-ordinate - u, U, u radial velocity component, its time-mean value, and the turbulent perturbation to it - v, V, v tangential or swirl velocity component, etc. - w, W, w axial velocity component, etc. - p, P, p fluid pressure, etc. - ,R, fluid density, etc. - , , , numbers small with respect to unity - C, F, G, G ₀ constants of integration     

Clustering Rules: A Comparison of Partitioning and Hierarchical Clustering Algorithms

Previous research has resulted in a number of different algorithms for rule discovery. Two approaches discussed here, the ‘all-rules’ algorithm and multi-objective metaheuristics, both result in the production of a large number of partial classification rules, or ‘nuggets’, for describing different subsets of the records in the class of interest. This paper describes the application of a number of different clustering algorithms to these rules, in order to identify similar rules and to better understand the data.     

Density functional calculation of quinone electrode potentials

Here, we have applied density functional methods, in combination with free energy hydration calculations, to calculate two-electron electrode potentials for quinones and naphthoquinones. While we find that the free-energy perturbation method, implemented within a molecular dynamics framework, is superior to the PM 3—SM 3 continuum method for determining free energies of hydration, the computationally less expensive PM 3—SM 3 method does perform well when there is not an internal hydrogen bond. Generally, all the density functional approaches investigated gave good energetics when applied to this problem, but the Beck '88—Vosko—Wilk—Nusair combination of functionals for the exchange-correlation energy gave the best results. The density functional results are marginally better than the Møller-Plesset second-order perturbation results. Moreover, because the results are obtained using a thermodynamic cycle which involves taking differences in total energies, the results are not too dependent on the quadrature scheme used to calculate the exchange-correlation energy. By using semiempirically optimized geometries and the PM 3—SM 3 method for determining free energies of hydration, it has been possible to calculate electrode potentials for a series of large molecules (naphthoquinones) to within about 30 mV of experiment. This result is extremely encouraging and shows that density functional methods offer great promise in the design of redox-active molecules such as bioreductive anticancer agents. © 1995 John Wiley & Sons, Inc.     

Toward a consistent treatment of polarization in model QM/MM calculations

The concept of model chemistries within hybrid QM/MM calculations has been addressed through analysis of the polarization energy determined by two distinct approaches based on (i) induced charges and (ii) induced dipoles. The quantum mechanical polarization energy for four configurations of the water dimer has been determined for a range of basis sets using Morokuma energy decomposition analysis. This benchmark value has been compared to the fully classical polarization energy determined using the induced dipole approach, and the molecular mechanics polarization energy calculated using induced charges within the MM region of hybrid QM/MM calculations. From the water dimer calculations, it is concluded that the induced charge approach is consistent with medium sized basis set calculations whereas the induced dipole approach is consistent with large basis set calculations. This result is highly relevant to the concept of QM/MM model chemistries.