Comparative reactivity of thiophene and 3,4-(ethylenedioxy)thiophene as terminal electropolymerizable units in bis-heterocycle arylenes

The monomers bis(2-thienyl)-9,9-didecylfluorene, BTDF, and bis(3,4-(ethylenedioxy)thien-2-yl)-9,9-didecylfluorene, BEDOT-DF, have been synthesized and electropolymerized to the corresponding conducting polymers. The potential for the electropolymerization of BTDF was found to be dependent on the solvent composition. In CH₂Cl₂, polymer film deposition is achieved only at potentials higher than 1.3 V vs. Ag/Ag⁺, while in a 30/70 mixture of CH₂Cl₂/CH₃CN the polymerization is efficient at 0.9 V. BEDOT-DF polymerizes at significantly lower potentials and more rapidly than BTDF. The electron-donating alkoxy substituents of the EDOT units lead to stabilization of the cation radical intermediates allowing the electropolymerization to proceed at 0.55 V. The neutral polymers are insoluble in common organic solvents and are stable to 300°C under nitrogen. Upon oxidation, both polymers show two intragap transitions at intermediate doping levels due to the formation of bipolaronic states and the oxidized polymers exhibit conductivities up to 10⁻⁴ S/cm. The redox-stimulated ion transport characteristics, studied by the electrochemical quartz crystal microbalance (EQCM) indicates that the electrolyte anions are the dominant mobile species. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3627–3636, 1997     

Determination of the Pesticide Fenbutatin Oxide in Tomatoes,Cucumbers and Bananas by High Performance Liquid Chromatographic/Atmospheric Pressure Chemical Ionization-Mass Spectrometry

A rapid method, using high-performance liquid chromatography (HPLC)/atmospheric pressure chemical ionization-mass spectrometry, has been developed for the determination of fenbutatin oxide in tomatoes, cucumbers and bananas. Samples were homogenized with sodium carbonate and ethyl acetate, filtered through sodium sulphate, concentrated and solvent exchanged into acetonitrile prior to analysis. HPLC was performed on a Hypercarb column with 10:90 acetic acid (5% v/v glacial acetic acid in water)/acetonitrile at a flow rate of 1 mL/min. Positive ionization selected-ion monitoring was performed on the 7 isotopic cluster ions from the tris(2-methyl-2-phenylpropyl) tin fragment. A comparison of solvent-based and extract-based standards showed that tomato and cucumber matrices had a slight enhancement effect on the signal intensity, whereas the banana matrix exerted a signal suppression effect. Calibration was linear over the range 0.25–5.0 ng/μL. The mean spike recoveries (extracts spiked at 0.5 mg/kg) were 88% for tomatoes and 80% for both cucumbers and bananas with relative standard deviations of 6%, 7% and 8% respectively. Limits of detection were commodity dependent and ranged from 0.06–0.12 ng/μL (equivalent to 0.01–0.02 mg/kg in the crop). Ionization was stable for long analytical time periods. © 1997 Crown Copyright     

Approximate Semi-analytical Solution for Injection–Falloff–Production Well Test: An Analytical Tool for the In Situ Estimation of Relative Permeability Curves

An injection–falloff–production test (IFPT) was originally proposed in Chen et al. (in: SPE conference paper, 2006. doi: 10.2118/103271-MS, SPE Reserv Eval Eng 11(1):95–107, 2008) as a well test for the in situ estimation of two-phase relative permeability curves to be used for simulating multiphase flows in porous media. Hence, we develop an approximate semi-analytical solution for the two-phase saturation distribution in an oil–water system during the flowback period of an IFPT according to the mathematical theory of waves. In fact, we show that the weak solution we construct for the saturation equation for the flowback period satisfies the Oleinik entropy condition and hence is unique. In addition, we allow the governing relative permeabilities during the flowback period to be different from the relative permeabilities during injection. Using the saturation solution with the steady-state pressure theory of Thompson and Reynolds, we obtain a solution for the wellbore pressure during the flowback period. By comparing results from our solution with those from a commercial numerical simulator, we show that our approximate semi-analytical solution yields accurate saturation profiles and bottom hole pressures history. The use of very small time steps and a highly refined radial grid is necessary to generate a good solution from a reservoir simulator. The approximate analytical pressure solution developed is used as a forward model to match pressure and water flow rate data from an IFPT in order to estimate reservoir rock absolute permeability and skin factor in conjunction with in situ imbibition and drainage water–oil relative permeabilities.     

Monte Carlo Model of Stricture Formation in Photodynamic Therapy of Normal Pig Esophagus

Photodynamic therapy (PDT) is FDA-approved for use in patients with Barrett's esophagus using porfimer sodium (2 mg per kg) and a recommended light dose of 130 J cm⁻¹ for high grade dysplasia. Despite uniform drug and light doses, the clinical outcome of PDT is variable. A significant number of PDT cases result in esophageal strictures, a side effect related to excessive energy absorption. The purpose of this project was to model esophageal stricture formation with a Monte Carlo simulation. An original multilayer Monte Carlo computer simulation was developed for esophageal PDT. Optical absorption and scattering coefficients were derived for mucosal and muscle layers of normal porcine esophagus. Porfimer sodium was added to each layer by increasing the absorption coefficient by the appropriate amount. A threshold-absorbed light dose was assumed to be required for stricture formation and ablation. The simulation predicted irreversible damage to the mucosa with a 160 J cm⁻¹ light dose and damage to the muscle layer with an additional 160 J cm⁻¹ light dose for a tissue porfimer sodium content of 3.5 mg kg⁻¹. The simulation accurately modeled photodynamic stricture formation in normal pig in vivo esophageal tissue. This preliminary work suggests that the absorbed light threshold for stricture formation may be between 2 and 4 J per gram of tissue.     

Synthesis of tertiary beta-hydroxy amides by enolate additions to acylsilanes

The synthesis of tertiary beta-hydroxy amides from acylsilanes, acetamides, and electrophiles is described. The addition of amide enolates to acylsilanes generates beta-silyloxy homoenolate reactivity by undergoing a 1,2-Brook rearrangement. These unique nucleophiles formed in situ can then undergo smooth addition to alkyl halides, aldehydes, and ketones. Enolates derived from amides are crucial for the success of this process since ketone enolates suffer from internal return of the beta-carbanion onto the carbonyl carbon. The use of optically active amide enolates delivers beta-hydroxy amide products with good levels of diastereoselectivity (>/=10:1).     

Identification of the Local Elasto-Plastic Behavior of FSW Welds Using the Virtual Fields Method

The present study focuses on the identification of the evolution of the local elasto-plastic properties of an Al 5456 FSW weld. To make the best use of the data collected using digital image correlation and to obtain an accurate identification of the evolution of the mechanical properties throughout the weld, an inverse procedure based on the Virtual Fields Method is proposed. Then, the strain-rate dependence of these properties is investigated by performing a set of tensile tests with a cross-head displacement speed evolving from 0.01 mm.s^???1 to 76 mm.s^???1. Identification of the evolution of the plastic properties throughout the weld with high spatial resolution has been achieved, and results from our study indicate that the plastic parameters in the center of the weld undergo a significant change even at low strain-rate (10 s^???1).     

An unconventional method for measuring the Tc L3‐edge of technetium compounds

Tc L₃‐edge XANES spectra have been collected on powder samples of SrTcO₃ (octahedral Tc⁴⁺) and NH₄TcO₄ (tetrahedral Tc⁷⁺) immobilized in an epoxy resin. Features in the Tc L₃‐edge XANES spectra are compared with the pre‐edge feature of the Tc K‐edge as well as other 4d transition metal L₃‐edges. Evidence of crystal field splitting is obvious in the Tc L₃‐edge, which is sensitive to the coordination number and oxidation state of the Tc cation. The Tc L₃ absorption edge energy difference between SrTcO₃ (Tc⁴⁺) and NH₄TcO₄ (Tc⁷⁺) shows that the energy shift at the Tc L₃‐edge is an effective tool for studying changes in the oxidation states of technetium compounds. The Tc L₃‐edge spectra are compared with those obtained from Mo and Ru oxide standards with various oxidation states and coordination environments. Most importantly, fitting the Tc L₃‐edge to component peaks can provide direct evidence of crystal field splitting that cannot be obtained from the Tc K‐edge.     

Utilizing Experiment and Theory to Evaluate Rhodamine B ethylenediamine as a Fluorescent Sensor for G-type Nerve Agents

Nerve gas mimic binding with Rhodamine B ethylenediamine (1) was studied in organic media. Binding of the nerve gas mimic, diethyl chlorophosphate (DCP), with the probe generated a non-fluorescent intermediate and a fluorescent product. Fluorescent and non-fluorescent products generated were identified using mass spectrometry and X-ray crystallography. Time-dependent density functional theory calculations were also used to investigate the electronic structure of the fluorescent probe in the ground and lowest lying π?→?π* singlet excited state. Though good agreement between theory and experiment can be obtained for the intense peak in the experimental spectrum using non-hybrid functionals, care must be taken when modelling these complexes due to the appearance of an n?→?π* transition that is too low in energy and appears to fall in the shoulders of the π?→?π* transitions.

     

Multivalent gold glycoclusters: high affinity molecular recognition by bacterial lectin PA-IL

Multivalent protein-carbohydrate interactions are involved in the initial stages of many fundamental biological and pathological processes through lectin-carbohydrate binding. The design of high affinity ligands is therefore necessary to study, inhibit and control the processes governed through carbohydrate recognition by their lectin receptors. Carbohydrate-functionalised gold nanoclusters (glyconanoparticles, GNPs) show promising potential as multivalent tools for studies in fundamental glycobiology research as well as biomedical applications. Here we present the synthesis and characterisation of galactose functionalised GNPs and their effectiveness as binding partners for PA-IL lectin from Pseudomonas aeruginosa. Interactions were evaluated by hemagglutination inhibition (HIA), surface plasmon resonance (SPR) and isothermal titration calorimetry (ITC) assays. Results show that the gold nanoparticle platform displays a significant cluster glycoside effect for presenting carbohydrate ligands with almost a 3000-fold increase in binding compared with a monovalent reference probe in free solution. The most effective GNP exhibited a dissociation constant (K(d)) of 50 nM per monosaccharide, the most effective ligand of PA-IL measured to date; another demonstration of the potential of glyco-nanotechnology towards multivalent tools and potent anti-adhesives for the prevention of pathogen invasion. The influence of ligand presentation density on their recognition by protein receptors is also demonstrated.