Highly diastereoselective synthesis of trans-2,5-disubstituted tetrahydrofurans

trans-2,5-Disubstituted tetrahydrofurans were obtained as major diastereomers (trans/cis ratio 90:10-100:0) when acetylated gamma-lactols derived from (S)-glutamic acid were treated with titanium enolates of N-acetyl (R)-oxazolidin-2-thiones. A simple transesterification allowed us to obtain the corresponding methyl esters and recover the chiral auxiliary.     

Preparation of new amide-linked pseudodisaccharides by the carboxymethylglycoside lactone (CMGL) strategy

6-Aminodeoxy sugars react with carboxymethyl 3,4,6-tri-O-acetyl-α-d-glucopyranoside 2-O-lactone (α-CMGL) to provide the corresponding new amide-linked glucose/glucose or glucose/galactose pseudodisaccharides in good yields. The strategy is extended to the synthesis of an amide-linked sugar/nucleoside adduct.     

Foam imbibition in microgravity

We report an experimental study of aqueous foam imbibition in microgravity with strict mass conservation. The foam is in a Hele-Shaw cell. The bubble edge width ℓ is measured by image analysis. The penetration of the liquid in the foam, the foam imbibition, the foam inflation, and the rigidity loss are shown all to obey strict diffusion processes. The motion of bubbles needed for the foam inflation is a slow two-dimensional process with respect to the one-dimensional capillary rise of liquid. The foam is found to imbibes faster than it inflates. Received 20 May 2002 / Received in final form 21 January 2003 Published online 23 May 2003 RID="a" ID="a"e-mail: herve.caps@ulg.ac.be     

Monolith Passive Adsorbers Prepared with Hydrophobic Porous Silica Rods Coated with Hydrogel

This work focuses on the synthesis and characterization of porous silica monolith-based adsorbent materials. Materials with bimodal porosity (macro and meso) were prepared through a sol–gel process. The capacity of adsorption of organic molecules was ensured by grafting of hydrophobic organic coating on the silica surface. Alkylsilane chains or lauryl acrylate polymer were used for this purpose. The adsorption kinetic behavior of the produced materials was assessed through benzophenone adsorption studies in aqueous media. The results have shown that the macropore size of the monoliths had no effect on the adsorption capacity. The thicker organic layer prepared by polymerization of lauryl acrylate has decreased the adsorption kinetics without affecting the total adsorption capacity. The over-coating with additional external layer of hydrogel further slowed the diffusion of benzophenone thus better matches the passive-sampler requirements.     

Lipid composition of membranes of Escherichia coli by liquid chromatography/tandem mass spectrometry using negative electrospray ionization

A liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) method using reversed-phase chromatography was developed for the analysis of phospholipids from bacterial extracts of a wild-type strain of Escherichia coli. Product ion mass spectra from [M--H](-) precursor ions allowed an identification of individual phospholipid species that includes both fatty acid composition and fatty acyl location on the glycerol backbone using diagnostic product ions. Thus, complete assignment, including sn-1/sn-2 fatty acyl position, was achieved for this strain of E. coli. In addition, the phospholipids were quantified relative to one another using an internal standard method.     

Gas puff nozzle characterization using interferometric methods andnumerical simulation

One of the source terms of Z-pinch experiments is the gas puff density profile. In order to characterize the gas puff, we have used two interferometrical methods and performed some numerical simulations. The merits of both optical techniques are presented in terms of sensitivity, accuracy, and full time recording. Hence, one technique has been chosen to characterize the gas puff. The computation fluid dynamics (CFD) code (ARES) has been used to simulate the gas flow with the aim of testing its performances. Comparing experimental and numerical data shows off the taking into account of gas viscosity in computations. Given these consistent results, the nozzle geometries can be optimized in order to obtain specific Z-pinch gas puffs and check the computation with the interferometric method. Results obtained with a cylindrical nozzle are presented herein     

Phase behavior of the quasiternary system N-methylmorpholine-N-oxide,water, and cellulose

The crystallization and melting behavior of the system N-methylmorpholine-N-oxide (MMNO)–H₂O–cellulose has been studied by differential scanning calorimetry, optical and electron microscopy, and x-ray scattering. The phase diagram of the MMNO–H₂O solvent system is reported up to a water content of 28% w/w. MMNO forms two crystalline hydrates, namely a monohydrate (13,3% w/w H₂O) and a hydrate comprising five molecules of crystal water per two MMNO molecules (28% w/w H₂O), which melts at 78°C and 39°C, respectively. The melting points of the various diluent crystals are strongly depressed in the presence of cellulose. For example, the solvent liquidus curve in the quasibinary system MMNO.1H₂O–cellulose can be described very well using the simple Flory–Huggins expression with an interaction parameter χ = ?3. Finally, the MMNO-rich part of the melting point/composition diagram of the quasiternary MMNO–H₂O–cellulose system is constructed and discussed.     

Synthesis and conformational analysis of a cyclic peptide obtained via i to i+4 intramolecular side-chain to side-chain azide-alkyne 1,3-dipolar cycloaddition

Intramolecular side-chain to side-chain cyclization is an established approach to achieve stabilization of specific conformations and a recognized strategy to improve resistance toward proteolytic degradation. To this end, cyclizations, which are bioisosteric to the lactam-type side-chain to side-chain modification and do not require orthogonal protection schemes, are of great interest. Herein, we report the employment of Cu(I)-catalyzed 1,3-dipolar cycloaddition of side chains modified with azido and alkynyl functions and explore alternative synthetic routes to efficiently generate 1,4-disubstituted [1,2,3]triazolyl-containing cyclopeptides. The solid-phase assembly of the linear precursor including epsilon-azido norleucine and the propargylglycine (Pra) in positions i and i+4, respectively, was accomplished by either subjecting the resin-bound peptide to selective on-resin diazo transformation of a Lys into the Nle(epsilon-N3) or the incorporation of Fmoc-Nle(epsilon-N3)-OH during the stepwise build-up of the resin-bound peptide 1b. Solution-phase Cu(I)-catalyzed 1,3-dipolar cycloaddition converts the linear precursor Ac-Lys-Gly-Nle(epsilon-N3)-Ser-Ile-Gln-Pra-Leu-Arg-NH2 (2) into the 1,4-disubstituted [1,2,3]triazolyl-containing cyclopeptide [Ac-Lys-Gly-Xaa(&(1))-Ser-Ile-Gln-Yaa(&(2))-Leu-Arg-NH2][(&(1)(CH2)4-1,4-[1,2,3]triazolyl-CH2&(2))] (3). The conformational preferences of the model cyclopeptide 3 (III), which is derived from the sequence of a highly helical and potent i to i+4 side-chain to side-chain lactam-containing antagonist of parathyroid hormone-related peptide (PTHrP), are compared to the corresponding lactam analogue Ac[Lys(13)(&(1)),Asp(17)(&(2))]hPTHrP(11-19)NH2 (II). CD and NMR studies of 3 and II in water/hexafluoroacetone (HFA) (50:50, v/v) revealed a high prevalence of turn-helical structures involving in particular the cyclic regions of the molecule. Despite a slight difference of the backbone arrangement, the side-chains of Ser, Gln, and Ile located at the i+1 to i+3 of the ring-forming sequences share the same spatial orientation. Both cyclopeptides differ regarding the location of the turn-helical segment, which in II involves noncyclized residues while in 3 it overlaps with residues involved in the cyclic structure. Therefore, the synthetic accessibility and conformational similarity of i to i+4 side-chain to side-chain cyclopeptide containing the 1,4-disubstituted [1,2,3]triazolyl moiety to the lactam-type one may result in similar bioactivities.     

Identification and relative quantification of fatty acids in Escherichia coli membranes by gas chromatography/mass spectrometry

The lipids that are essential to the functioning of the bacterial membrane exist in hundreds of different forms. The reasons for this diversity are far from clear but are presumably related to the roles of these lipids in both facilitating enzymic activities and generating proteolipid domains. A full understanding of bacterial physiology therefore requires characterization of lipids in different strains in a variety of environmental conditions. This characterization then becomes the basis for lipidomics, the lipid aspect of the growing field of metabolomics. To exploit the power of derivatization chemistry and of gas chromatography/mass spectrometry (GC/MS) and tandem mass spectrometry (MS/MS) for metabolomics studies, we report here the development of various GC/MS electron ionization (EI) and negative and positive chemical ionization (CI) methods for the identification and, for the first time, the relative quantification of fatty acids present in extracts from membranes of a laboratory strain of Escherichia coli. They consist of seven saturated fatty acids (C10:0, C12:0, C14:0, C15:0, C16:0, C17:0 and C18:0) and six unsaturated fatty acids (C16:1, cyC17:0 plus two isomers of C18:1, C18:2 and cyC19:0).     

New pseudan (2-alkyl-4(1H)-quinolinone) alkaloids from Boronia ternata var. elongata and Boronia alulata (Rutaceae)

The aerial parts of Boronia ternata var. elongata from western Australia has yielded three new 2-acyl-4(1H)-quinolinone alkaloids, characterised as 2-n-pentyl-4(1H)-quinolinone, 1-methyl-2-n-pentyl-4(1H)-quinolinone and 1-methyl-2-(1 xi-methyl)-propyl-4(1H)-quinolinone, as well as known alkaloids of this class and a furoquinoline alkaloid. Boronia alulata, from northeast Queensland, also yielded 2-n-pentyl-4(1H)-quinolinone together with the known 2-n-propyl-4(1H)-quinolinone. Both species are assigned to Boronia section Valvatae which, alone among the sections of Boronia, appears to be characterised by the presence of alkaloids.