Diastereoselective Electrophilic Amination of Chiral 1‐Benzoyl‐2,3,5,6‐tetrahydro‐3‐methyl‐2‐(1‐methylethyl)pyrimidin‐4(1H)‐one for the Asymmetric Syntheses of α‐Substituted α,β‐Diaminopropanoic Acids

The chiral compounds (R)‐ and (S)‐1‐benzoyl‐2,3,5,6‐tetrahydro‐3‐methyl‐2‐(1‐methylethyl)pyrimidin‐4(1H)‐one ((R)‐ and (S)‐ 1 ), derived from (R)‐ and (S)‐asparagine, respectively, were used as convenient starting materials for the preparation of the enantiomerically pure α‐alkylated (alkyl=Me, Et, Bn) α,β‐diamino acids (R)‐ and (S)‐ 11 – 13 . The chiral lithium enolates of (R)‐ and (S)‐ 1 were first alkylated, and the resulting diasteroisomeric products 5 – 7 were aminated with ‘di(tert‐butyl) azodicarboxylate’ (DBAD), giving rise to the diastereoisomerically pure (≥98%) compounds 8 – 10 . The target compounds (R)‐ and (S)‐ 11 – 13 could then be obtained in good yields and high purities by a hydrolysis/hydrogenolysis/hydrolysis sequence.     

Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts

Fe-ZrO₂ and Cu-ZrO₂ xerogels were prepared by a sol-gel method. The effect of the hydrolysis catalyst during the gelation step, namely H₂SO₄ or NH₄OH, on the properties of the resulting materials was investigated by XRD, BET, TGA/DTA, TPD of ammonia, FTIR, and TPR. Fe-ZrO₂ and Cu-ZrO₂ xerogels, with sulfuric acid introduced as the hydrolysis catalyst, mainly crystallyzed in the tetragonal phase and exhibited larger surface area and acid amount than those obtained with NH₄OH. Ammonia TPD shows that copper promoted sulfated zirconia is the most acidic material. TGA and FTIR reveal that under oxidizing conditions sulfated zirconia promoted with iron and copper retains more sulfate species than unpromoted sulfated zirconia. Regardless of the hydrolysis catalyst employed, copper promoted catalysts calcined at 600°C, contain a large fraction of copper oxide specieseasily reduced at low temperatures. These copper oxide species are believed to have different environment and interactions with the surface oxygen vacancies of the zirconia support. A FeO-like phase appears to be the most probable one after reduction of Fe-ZrO₂ catalysts prepared with NH₄OH as the hydrolysis catalyst. The formation of Fe° species may be hindered by the high dispersion and interaction of Fe²⁺ ions with the zirconia support. On the other hand, the reduction peaks of iron oxide and sulfate species exhibit a considerable overlap in the TPR profiles of sulfated Fe-ZrO₂ samples. Hence, the nature of the supported phase in the latter samples is rather uncertain.     

Unravelling the Time Scale of Conformational Plasticity and Allostery in Glycan Recognition by Human Galectin-1

The interaction of human galectin-1 with a variety of oligosaccharides, from di-(N-acetyllactosamine) to tetra-saccharides (blood B type-II antigen) has been scrutinized by using a combined approach of different NMR experiments, molecular dynamics (MD) simulations, and isothermal titration calorimetry. Ligand- and receptor-based NMR experiments assisted by computational methods allowed proposing three-dimensional structures for the different complexes, which explained the lack of enthalpy gain when increasing the chemical complexity of the glycan. Interestingly, and independently of the glycan ligand, the entropy term does not oppose the binding event, a rather unusual feature for protein-sugar interactions. CLEANEX-PM and relaxation dispersion experiments revealed that sugar binding affected residues far from the binding site and described significant changes in the dynamics of the protein. In particular, motions in the microsecond-millisecond timescale in residues at the protein dimer interface were identified in the presence of high affinity ligands. The dynamic process was further explored by extensive MD simulations, which provided additional support for the existence of allostery in glycan recognition by human galectin-1.     

A new class of conformable spectral observers for signal reconstruction

In this work, the design of spectral observers for signal reconstruction based on Kalman filters is performed and evaluated. The conformable derivative and the beta‐derivative were used to design the Kalman filters. Both derivatives satisfy the same formulas of the classical derivation, eg, the chain rule. The derivative order, the Ricatti equation parameters, and the observers tuning parameters were optimized using an optimization algorithm based on the bat's echolocation behavior (Bat algorithm). The simulation results showed the advantages of using the proposed observers for the signal reconstruction.     

SALS,WAXS and mechanical properties of heat‐treated thermotropic polymers

The influence of heat treatment on the texture, microstructure and tensile mechanical properties of extruded thin films of a series of high‐performance thermotropic liquid crystal polymers (LCPs) was investigated. LCPs based on random units of hydroxybenzoic acid (B), hydroxynaphthoic acid (N), terephthalic acid (TA) and biphenol (BP) were kindly supplied by the former Hoechst Celanese Corp as 50 µm thick extruded tapes. The LCPs, denoted B‐N, COTBP and RD1000, have B and N as common comonomers and vary the other comonomers. Thus, this study also enables the investigation of the influence of monomer composition on microstructure and mechanical properties. Heat treatments were carried out at temperatures close to the solid‐to‐nematic transition (T_s→n) for periods up to 5 h, under dry air conditions. The thermal treatment produced either two endotherms or a small increase of T_s→n (B‐N and RD1000), or increased significantly T_s→n (COTBP). Moreover, when heat treatment was carried out approximately 40°C below the respective T_s→n, the mechanical Young's modulus, E, along the extrusion axis, increased for all LCPs. Strikingly, for COTBP, E increased over 100% relative to the as‐extruded film. The results also showed that the optimum treatment time for improving the Young modulus, under dry air atmosphere, was between 3 and 4 h. Wide‐angle X‐ray scattering showed a significant sharpening of crystalline reflections and concentration of the 002 meridional reflection as a result of thermal treatment, suggesting the elimination of defects and a better alignment of the molecular chains along the extrusion axis. This would explain the increase in tensile modulus. Copyright © 2013 John Wiley & Sons, Ltd.     

Three Bis‐BODIPY Analogous Diruthenium Redox Series: Characterization and Electronic Structure Analysis

The dianion derived from (2Z,6Z)‐3,7‐diphenyl‐N2,N6‐di(pyridin‐2‐yl)pyrrolo[2,3‐f]indole‐2,6(1H,5H)‐diimine (H₂BL), a modified BODIPY ligand precursor, is shown to be capable of bridging two metal complex fragments RuL₂, L=2,4‐pentanedionato (acac^?), 2,2’‐bipyridine (bpy) or 2‐phenylazopyridine (pap) in [Ru(acac)₂Ru(μ‐BL)Ru(acac)₂] ( 1 / 2 ), [Ru(bpy)₂Ru(μ‐BL)Ru(bpy)₂](ClO₄)₂ ([ 3 ](ClO₄)₂) and [Ru(pap)₂Ru(μ‐BL)Ru(pap)₂](ClO₄)₂ ([ 4 ](ClO₄)₂). The compounds, including a diastereoisomeric pair 1 (meso) and 2 (rac) were spectroscopically and structurally characterized. Reversible electron transfers as revealed by cyclic and differential pulse voltammetry allowed for an EPR and UV‐vis‐NIR spectroelectrochemical investigation of several neighboring charge states. Together with susceptibility measurements and TD‐DFT calculations the assignment of oxidation states reveals that 1 , 2 are diruthenium(III) species which can be oxidized or reduced by one electron whereas 3 ²⁺ and 4 ²⁺ contain ruthenium(II) and get reduced or oxidized mainly at the dianionic bridge ( 3 ²⁺) or are reduced at the ancillary ligands pap ( 4 ²⁺).     

Amino acid catalyzed neogenesis of carbohydrates: a plausible ancient transformation

Hexose sugars play a fundamental role in vital biochemical processes and their biosynthesis is achieved through enzyme-catalyzed pathways. Herein we disclose the ability of amino acids to catalyze the asymmetric neogenesis of carbohydrates by sequential cross-aldol reactions. The amino acids mediate the asymmetric de novo synthesis of natural L- and D-hexoses and their analogues with excellent stereoselectivity in organic solvents. In some cases, the four new stereocenters are assembled with almost absolute stereocontrol. The unique feature of these results is that, when an amino acid is employed as the catalyst, a single reaction sequence can convert a protected glycol aldehyde into a hexose in one step. For example, proline and its derivatives catalyze the asymmetric neogenesis of allose with >99 % ee in one chemical manipulation. Furthermore, all amino acids tested catalyzed the asymmetric formation of natural sugars under prebiotic conditions, with alanine being the smallest catalyst. The inherent simplicity of this catalytic process suggests that a catalytic prebiotic "gluconeogenesis" may occur, in which amino acids transfer their stereochemical information to sugars. In addition, the amino acid catalyzed stereoselective sequential cross-aldol reactions were performed as a two-step procedure with different aldehydes as acceptors and nucleophiles. The employment of two different amino acids as catalysts for the iterative direct aldol reactions enabled the asymmetric synthesis of deoxysugars with >99 % ee. In addition, the direct amino acid catalyzed C(2)+C(2)+C(2) methodology is a new entry for the short, highly enantioselective de novo synthesis of carbohydrate derivatives, isotope-labeled sugars, and polyketide natural products. The one-pot asymmetric de novo syntheses of deoxy and polyketide carbohydrates involved a novel dynamic kinetic asymmetric transformation (DYKAT) mediated by an amino acid.