Light absorption during alkali atom-noble gas atom interactions at thermal energies: a quantum dynamics treatment

The absorption of light during atomic collisions is treated by coupling electronic excitations, treated quantum mechanically, to the motion of the nuclei described within a short de Broglie wavelength approximation, using a density matrix approach. The time-dependent electric dipole of the system provides the intensity of light absorption in a treatment valid for transient phenomena, and the Fourier transform of time-dependent intensities gives absorption spectra that are very sensitive to details of the interaction potentials of excited diatomic states. We consider several sets of atomic expansion functions and atomic pseudopotentials, and introduce new parametrizations to provide light absorption spectra in good agreement with experimentally measured and ab initio calculated spectra. To this end, we describe the electronic excitation of the valence electron of excited alkali atoms in collisions with noble gas atoms with a procedure that combines l-dependent atomic pseudopotentials, including two- and three-body polarization terms, and a treatment of the dynamics based on the eikonal approximation of atomic motions and time-dependent molecular orbitals. We present results for the collision induced absorption spectra in the Li-He system at 720 K, which display both atomic and molecular transition intensities.     

Equatorially connected diruthenium(II,III) units toward paramagnetic supramolecular structures with singular magnetic properties

The reaction of Ru2Cl(O2CMe)(DPhF)3 (DPhF = N,N'-diphenylformamidinate) with mono- and polycarboxylic acids gives a clean substitution of the acetate ligand, leading to the formation of complexes Ru2Cl(O2CC6H5)(DPhF)3 (1), Ru2Cl(O2CC6H4-p-CN)(DPhF)3 (2), [Ru2Cl(DPhF)3(H2O)]2(O2C)2 (3), [Ru2Cl(DPhF)3]2[C6H4-p-(CO2)2] (4), and [Ru2Cl(DPhF)3]3[C6H3-1,3,5-(CO2)3] (5). The preparation of [Ru2(NCS)(DPhF)3]3[C6H3-1,3,5-(CO2)3] (6) and {[Ru2(DPhF)3(H2O)]3[C6H3-1,3,5-(CO2)3]}(SO3CF3)3 (7) from 5 is also described. All complexes are characterized by elemental analysis, IR and electronic spectroscopy, mass spectrometry, cyclic voltammetry, and variable-temperature magnetic measurements. The crystal structure determinations of complexes 2.0.5THF and 3.THF.4H2O (THF = tetrahydrofuran) are reported. The reactions carried out demonstrate the high chemical stability of the fragment [Ru2(DPhF)3]2+, which is preserved in all tested experimental conditions. The stability of this fragment is also corroborated by the mass spectra. Electrochemical measurements reveal in all complexes one redox process due to the equilibrium Ru2(5+) <--> Ru2(6+). In the polynuclear complex 7, some additional oxidation processes are also observed that have been ascribed to the presence of two types of dimetallic units rather than two consecutive reversible oxidations. The magnetic behavior toward temperature for complexes 1-7 from 300 to 2 K is analyzed. Complexes 1-7 show low values of antiferromagnetic coupling in accordance with the molecular nature in 1 and 2 and the absence of important antiferromagnetic interaction through the carboxylate bridging ligands in 3-7, respectively. In addition, the magnetic properties of complex 7 do not correspond to any magnetic behavior described for diruthenium(II,III) complexes. The experimental data of compound 7 are simulated considering a physical mixture of S = 1/2 and 3/2 spin states. This magnetic study demonstrates the high sensitivity of the electronic configuration of the unit [Ru2(DPhF)3]2+ to small changes in the nature of the axial ligands. Finally, the energy gap between the pi and delta orbitals in these types of compounds allows the tentative assignment of the transition pi --> delta.     

Facilitating the culture of mammalian nerve cells with polyelectrolyte multilayers

When neuron-like cells (NLCs) derived from pluripotent embryonal carcinoma cells (P19) are cultured on bare tissue culture substrates, they require a monolayer of fibroblast cells to exhibit normal neurite outgrowth, behavior typical of neuronal cultures. However, substrate treatment with polyelectrolyte multilayers (PEMs) composed of poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonic acid) (PSS) significantly improved these cultures. Cell morphology was more spread, indicative of healthy cells, and direct attachment of neuronal cell bodies to the treated surface was observed. Neuronal outgrowth across the surface was not dependent on an underlying fibroblast monolayer with the PEMs surface treatment. Additionally, the PEMs surface treatment can be used to condition various surfaces, facilitating neuronal cultures on surfaces which are natively hydrophilic (tissue culture polystyrene) or hydrophobic (poly(dimethylsiloxane), PDMS). Microfluidic networks were used to micropattern the PEMs onto PDMS, resulting in confined regions of cellular attachment and directed neuronal outgrowth. The ability of PEMs to encourage NLC attachment without supporting cells to a variety of surfaces and surface geometries greatly simplifies neuronal culture methodology and enables neuronal investigations in new environments.     

Heterovalent selectivity and the combinatorial advantage

Libraries of monovalent compounds can be reacted with each other to give libraries of bivalent ones. If those reactions are efficient, and if the products do not need to be purified, large numbers of bivalent compounds can be produced rapidly, and one might say there is a "combinatorial advantage" to doing so. However, selective formation of heterobivalent products must be possible otherwise statistical mixtures will form. This tutorial review describes methods that will give heterobivalent compounds almost exclusively. Although there are relatively few methods that will give that desired selectivity, such methods are becoming increasingly important as the potential applications of bi- and multivalent compounds emerge.     

Microwave-assisted extraction through an aqueous medium and simultaneous cleanup by partition on hexane for determining pesticides in agricultural soils by gas chromatography: a critical study

A simple microwave-assisted extraction and partitioning method (MAEP) using water-acetonitrile and n-hexane for desorption and simultaneous partitioning, respectively, together with gas chromatography (GC) was studied to determine representative pesticides (trifluralin, metolachlor, chlorpyriphos and triadimefon) with a broad range of physico-chemical properties in agricultural soils. Three points were considered crucial in this study: instrumental and sample-associated factors affecting extraction of the target compounds were studied through experimental design; the spiking procedure at trace levels was carried out to reproduce the solute-soil sorption taking place in the environment as closely as possible; and results were analyzed taking into account the adsorption behaviour of the compounds on different kinds of soils. The complete analytical procedure proposed consisted of the MAEP of pesticides from 1.0 g of soil with 1 mL of 1:1 water/acetonitrile mixture, and 5 mL of hexane for trapping. The microwave heating program applied was 2 min at 250 W and 10 min at 900 W, and 130 °C maximum temperature. After extraction, the hexane layer was evaporated to dryness; the residue was re-dissolved and directly analyzed by gas chromatography electron capture detection (GC-ECD). Clean chromatograms were obtained without any additional cleanup step. Besides the four pesticides used to optimise MAEP, the method was applied to determine an additional group of pesticides (triallate, acetochlor, alachlor, endosulphan I and II, endrin, methoxychlor and tetradifon) in different soils. Most of the compounds studied were recovered in good yields with relative standard deviations (R.S.D.s) below 9% and detection limits ranged from 0.004 to 0.036 μg g⁻¹. The described method is efficient and fast to determine hydrophobic pesticides at ng g⁻¹ level in soil with different clay-to-organic matter ratios.     

Determination of copper and nickel in vegetable oils by direct sampling graphite furnace atomic absorption spectrometry

The quality of food products has been receiving great attention due to its influence on human nutrition and health. In this sense, the determination of trace metals in foods has turned an important field on food analysis. Concerning vegetable oils, its metal trace composition is an important criterion for the assessment of their quality once it is known that trace metals affect their rate of oxidation, influencing freshness, keeping properties as well as storage. In the present work an analytical method which enables the direct determination of Cu and Ni in vegetable oils by graphite furnace atomic absorption spectrometry (GFAAS), using a “solid” sample strategy is presented: in nature, samples are directly weighed on the graphite platform boat and inserted in the graphite tube. An adequate temperature program permitted the calibration by external aqueous analytical curves. Good concordance between the proposed procedure and EPA procedures was found in the analysis of real samples. Limits of detection of 0.001 and 0.002 μg g⁻¹ were found for Cu and Ni, respectively, in the original samples, and they were comfortably below the concentrations found.     

Electromagnetic Propagation in a Relativistic Electron Gas at Finite Temperatures

The electromagnetic propagation in a relativistic electron gas at finite temperatures and carrier densities is described. Using quantum electrodynamics at finite temperatures, electric and magnetic responses and general constitutive relations are obtained. Rewriting the propagator for the electromagnetic field in terms of the electric and magnetic responses, the modes that propagate in the gas are identified. As expected, the usual collective excitations are obtained, i.e., a longitudinal electric and two transverse magnetic plasmonic modes. In addition, a purely photonic mode is found, which satisfies the wave equation in vacuum, for which the electron gas is transparent. Dispersion relations for the plasmon modes at zero and finite temperatures are presented and the intervals of frequency and wavelength where both electric and magnetic responses are simultaneously negative are identified, a behavior previously thought not to occur in natural systems. The investigation of the electromagnetic responses of a relativistic electron gas shows that, apart from the usual longitudinal electric plasmon mode and the two transverse magnetic plasmon modes, there is also a pure photonic mode that propagates with the speed of light, as if the medium were transparent. Furthermore, there is a region of frequencies and wavenumbers of the external fields where both the longitudinal electric permittivity and magnetic permeability are simultaneously negative, a property found in artificially constructed metamaterials.     

Transport and abatement of fluorescent silica nanoparticle (SiO<Subscript>2</Subscript> NP) in granular filtration: effect of porous media and ionic strength

The extensive production and application of engineered silica nanoparticles (SiO₂ NPs) will inevitably lead to their release into the environment. Granular media filtration, a widely used process in water and wastewater treatment plants, has the potential for NP abatement. In this work, laboratory-scale column experiments were performed to study the transport and retention of SiO₂ NPs on three widely used porous materials, i.e., sand, anthracite, and granular activated carbon (GAC). Synthetic fluorescent core-shell SiO₂ NPs (83 nm) were used to facilitate NP detection. Sand showed very low capacity for SiO₂ filtration as this material had a surface with limited surface area and a high concentration of negative charge. Also, we found that the stability and transport of SiO₂ NP were strongly dependent on the ionic strength of the solution. Increasing ionic strength led to NP agglomeration and facilitated SiO₂ NP retention, while low ionic strength resulted in release of captured NPs from the sand bed. Compared to sand, anthracite and GAC showed higher affinity for SiO₂ NP capture. The superior capacity of GAC was primarily due to its porous structure and high surface area. A process model was developed to simulate NP capture in the packed bed columns and determine fundamental filtration parameters. This model provided an excellent fit to the experimental data. Taken together, the results obtained indicate that GAC is an interesting material for SiO₂ NP filtration.     

Anomalous temperature dependence of speed of sound of bulk poly(N-isopropylacrylamide) hydrogels near the phase transition

Bulk Poly(N-isopropylacrylamide) (PNIPAm) hydrogels are thermally responsive polymers that undergo a sharp volumetric phase transition around its lower critical solution temperature of 33 °C. The physical characteristics of bulk, micro-, and nano-form PNIPAm hydrogel have been well-studied, and have applications ranging from biomedical devices to mechanical actuators. An important physical characteristics which reveals lack of available information is speed of sound. Prior studies have utilized Brillouin scattering, multi-echo reflection ultrasound spectroscopy, the sing-around method, and others in measuring the speed of sound. We use a planar resonant cavity with bulk PNIPAm hydrogel in aqueous solution to determine the temperature dependent speed of sound around the lower critical solution temperature. The results show sharp nonmonotonic behavior of the sound velocity in vicinity of the phase transition.     

An amine-catalyzed enantioselective [3+2] cycloaddition of azomethine ylides and α,β-unsaturated aldehydes: applications and mechanistic implications

The catalytic enantioselective [3+2] cycloaddition between azomethine ylides and α,β-unsaturated aldehydes catalyzed by α,α-diphenylprolinol has been studied in detail. In particular, the reaction has been extended to the use of 2-alkenylidene aminomalonates generated in situ as azomethine ylide precursors. These reactions lead to the formation of pyrrolidines containing a 5-alkenyl side chain with potential for chemical manipulation. Moreover, a detailed and concise computational study has been carried out to understand the exact nature of the mechanism of this reaction and especially the consequences derived from the incorporation of the chiral secondary amine catalyst on the reaction pathway.