基于三种气化炉的整体煤气化湿化燃气轮机循环热力性能分析

将燃料湿化和空气湿化应用到整体煤气化燃气轮机循环中,以降低NOx排放并有效利用系统低品位热。基于水煤浆、干煤粉及输运床三种气化炉,构建了多种整体煤气化湿化燃气轮机循环,分析了其热力性能并给出了湿化方式建议。研究表明：燃料湿化循环系统效率较高;空气湿化循环燃气轮机比功较大;整体煤气化湿化燃气轮机循环具有利用系统外部中低品...     

质子交换LiNbO3波导调制器多模截止波长的测试技术研究

提出并实验了一种采用倒置输入的结构来测定Y分支LiNbO3波导相位调制器的多模截止波长的新方法,模式耦合分析表明,倒置输入的Y分支波导的多模传输的输出功率具有随波长变动发生振荡的特征,该特征可用于定量判定多模截止波长.方法的有效性得到了波束传播法(BPM)仿真和样品实验两方面的验证.     

Micromegas prototypes with thermo-bond film separators

In this paper we report the results of Micromegas prototypes constructed by attaching micromesh to an anode using thermo-bond films. The excellent metal attaching ability and good dielectical property of this kind of film make it a promising material to be used as avalanche gap spacers. Several prototypes are successfully made. The electron transmission properties are first studied and then the gas gain is measured in argon-isobutane mixtures. The maximum gain of more than 10⁴ is easily obtained. The energy resolutions for ⁵⁵Fe 5.9 keV K_α ray can be better than 20% over one magnitude in gain for different operational gas mixtures and the best energy resolution of 13.7% (FWHM) can be achieved with the gas mixture of 94% argon concentration. The preliminary test results of the prototypes with sensitive area of 45 mm×45 mm without internal support show good uniformity across the sensitive area.     

Determination of the time resolution for neutron scintillation detectors by multi-coincidence measurement

Based on the multi-coincidence measurement, the time resolution of three liquid scintillation detectors (BC501A) were determined strictly by solving the coincidence equations, where the influence from electronics estimated by self coincidence measurement as well as the background had been considered. The result of this work agreed well with the result that was deduced from the traditional method, and it will be helpful to analyze the energy resolution of neutron time of flight spectra measured by using such detectors at CIAE (China Institute of Atomic Energy).     

A novel simulation method to evaluate the collection performance of a monolithic active pixel sensor

A novel simulation method is presented in this paper to evaluate the collection performance of monolithic active pixel sensor (MAPS) devices for minimum ionizing particle tracking. A simplified 3D matrix pixel structure is built using the computer aided design software Sentaurus. The virtual device is then divided into hundreds of parts and an independent customized X photon model is involved in each part to simulate the conditions under ⁵⁵Fe radiation. After data processing and analysis, charge collection efficiency, collection time and diffusion conditions can be estimated in detail. In order to verify the reliability of the method, comparisons are made between the simulations and experiments. Although there are some defects, it can be concluded that the proposed idea is a feasible method for the evaluation of the MAPS collection performance.     

Theoretical investigation of the Gamow-Teller transition across N=40 shell

The Gamow-Teller transitions for pf shell nuclei with proton number less than 40 and neutron number larger than 40 were believed to be blocked, due to the full filling of the neutron orbit. However, recent experimental research shows that the Gamow-Teller transitions for these kinds of nuclei are not blocked. In this paper, we systematically calculate the GT transition of pf shell nuclei ⁷⁶Se in different truncations, and the results are compared with experimental results. It is shown that, due to correlations, the believed blocked GT transition occurs, and the shell model calculations reproduce the experimental GT strength. In addition, the electron capture rates in a stellar environment are calculated and discussed.     

Multi-modal calculations of prompt fission neutrons from 238U（n,f） at low induced energy

Properties of prompt fission neutrons from ²³⁸U(n, f) are calculated for incident neutron energies below 6 MeV using the multi-modal model, including the prompt fission neutron spectrum, the average prompt fission neutron multiplicity, and the prompt fission neutron multiplicity as a function of the fission fragment mass υ(A) (usually named “sawtooth” data) The three most dominant fission modes are taken into account. The model parameters are determined on the basis of experimental fission fragment data. The predicted results are in good agreement with the experimental data.     

Cascade-exciton model analysis of level density parameter dependence in proton induced fission cross sections of some sub-actinide nuclei

Fission cross sections strongly depend on the ratio of the level density parameter in fission to neutron emission, a_f/a_n. In this work, a cascade-exciton model implemented in the code CEM95 has been used to observe this effect for proton induced fission cross sections of tungsten, lead and bismuth. The method was employed using different level density parameter ratios for each fission cross section calculation. The calculated fission cross sections are compared with the available experimental data in the literature. It has been observed that a change of the ratio of the level density parameter, a_f/a_n, is necessary with the incident energy of the proton, to best estimate the fission cross sections in CEM95.     

Study on induced radioactivity of China Spallation Neutron Source

China Spallation Neutron Source (CSNS) is the first High Energy Intense Proton Accelerator planned to be constructed in China during the State Eleventh Five-Year Plan period, whose induced radioactivity is very important for occupational disease hazard assessment and environmental impact assessment. Adopting the FLUKA code, the authors have constructed a cylinder-tunnel geometric model and a line-source sampling physical model, deduced proper formulas to calculate air activation, and analyzed various issues with regard to the activation of different tunnel parts. The results show that the environmental impact resulting from induced activation is negligible, whereas the residual radiation in the tunnels has a great influence on maintenance personnel, so strict measures should be adopted.