Fundamental Methods for the Phase Transfer of Nanoparticles

The utilization of nanoparticles for a variety of applications has raised much interest in recent years as new knowledge has emerged in nanochemistry. New and diverse methods for synthesis, characterization, and application of these particles have been discovered with differing degrees of ease and reproducibility. Post-synthetic modification of nanoparticles is often a required step to facilitate their use in applications. The reaction conditions and chemical environment for the nanoparticle synthesis may not support or may conflict with further reactions. For this reason, it is beneficial to have phase transfer methods for nanoparticles to allow for their dispersion in a variety of solvents. Phase transfer methods are often limited in the types and sizes of particles that can be effectively dispersed in an immiscible solvent. Currently, general transfer methods for a wide variety of nanoparticles have not been identified. New routes for phase transfer allow for utilization of a larger range of particles in applications which were previously limited by solubility and reactivity issues. In this work, we will describe the fundamental methods for the phase transfer of metallic nanoparticles. We will look at the major problems and pitfalls of these methods. The applications of phase transfer will also be reviewed, mainly focusing on catalysis and drug delivery.     

Acetalization of glycerol using mesoporous MoO3/SiO2 solid acid catalyst

Acetalization of glycerol with various aldehydes has been carried out using mesoporous MoO₃/SiO₂ as a solid acid catalyst. A series of MoO₃/SiO₂ catalysts with varying MoO₃ loadings (1–20 mol%) were prepared by sol–gel technique using ethyl silicate-40 and ammonium heptamolybdate as silica and molybdenum source respectively. The sol–gel derived samples were calcined at 500 °C and characterized using various physicochemical characterization techniques. The XRD of the calcined samples showed the formation of amorphous phase up to 10 mol% MoO₃ loading and at higher loading of crystalline α-MoO₃ on amorphous silica support. TEM analyses of the materials showed the uniform distribution of MoO₃ nanoparticles on amorphous silica support. Raman spectroscopy showed the formation of silicomolybdic acid at low Mo loading and a mixture of α-MoO₃ and polymolybdate species at high Mo loadings. Moreover the Raman spectra of intermediate loading samples also suggest the presence of β-MoO₃. Acetalization of glycerol with benzaldehyde was carried out using series of MoO₃/SiO₂ catalysts with varying MoO₃ loadings (1–20 mol%). Among the series, MoO₃/SiO₂ with 20 mol% MoO₃ loadings was found to be the most active catalyst in acetalization under mild conditions. Maximum conversion of benzaldehyde (72%) was obtained in 8 h at 100 °C with 60% selectivity for the six-membered acetal using 20% MoO₃/SiO₂. Interestingly with substituted benzaldehydes under same reaction conditions the conversion of aldehydes decreased with increase in selectivity for six-membered acetals. These results indicate the potential of this catalyst for the acetalization of glycerol for an environmentally benign process.     

Synthesis and characterization of toluene-3,4-dithiolatoantimony(III) derivatives with some oxygen and/or sulphur donor ligands

Replacement reactions of toluene-3,4-dithiolatoantimony(III) chloride with oxygen and/or sulphur donor ligands like benzoic acid, thiobenzoic acid, thioacetic acid, phenol, thiophenol, sodium salicylate and thio glycolic acid in 1:1 molar ratio as well as disodium oxalate in 2:1 molar ratio in refluxing anhydrous benzene yielded toluene-3,4-dithiolatoantimony(III) mono oxo and/or thio carboxylic or phenolic derivatives of the general formula {R = OOCC₆H₅, SOCC₆H₅, SOCCH₃, OC₆H₅, SC₆H₅, OOCC₆H₄(OH) and SCH₂COOH} and

Full-size image (3K)

These newly synthesized derivatives are yellow and brown solids/liquids and are soluble in common organic solvents like benzene, chloroform, dichloromethane, etc. These derivatives have been characterized by melting point determination, molecular weight determination, elemental analysis (C, H, S and Sb), spectral {UV, IR and NMR (¹H and ¹³C)} and thermal (TGA, DTA and DSC) studies.     

Fall colouring of bipartite graphs and cartesian products of graphs

The question of whether a graph can be partitioned into k independent dominating sets, which is the same as having a fallk-colouring, is considered. For k=3, it is shown that a graph G can be partitioned into three independent dominating sets if and only if the cartesian product G□K₂ can be partitioned into three independent dominating sets. The graph K₂ can be replaced by any graph H such that there is a mapping f:Q_n→H, where f is a type-II graph homomorphism.The cartesian product of two trees is considered, as well as the complexity of partitioning a bipartite graph into three independent dominating sets, which is shown to be NP-complete. For other values of k, iterated cartesian products are considered, leading to a result that shows for what values of k the hypercubes can be partitioned into k independent dominating sets.     

Sequestration of amitriptyline by liposomes

We study the uptake of amitriptyline, which is a common cause of overdose-related fatalities, in aqueous solutions by 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) liposomes and liposomes composed of a mixture of DMPC and 1,2-dioleoyl-sn-glycero-3-[phospho-rac(1-glycerol)] (DOPG) lipids. The effect of drug concentration, liposomal charge, pH, salt, and protein presence on the drug uptake is investigated using two different methodologies, a precipitation and a centrifugation method. Furthermore, the time scale of the drug uptake is studied through qualitative observations at high pH and through conductivity measurements at neutral pH and found to be <5 s. The results of the quantitative studies show that the fractional drug uptake decreases with increasing drug concentration, and for a given concentration it increases with the pH and decreases in the presence of salt. We find that a larger amount of drug is sequestered by negatively charged liposomes (those containing DOPG) than liposomes with no net charge (DMPC). We speculate that the mechanism of drug uptake is due to both electrostatic interactions as well as hydrophobic effects. The fractional uptake by DMPC:DOPG in a 70:30 ratio is as high as 95% in water and about 90% in physiological buffer. The fractional uptake is also measured in presence of 2% (w/w) bovine serum albumin (BSA), which is approximately the protein concentration in the intercellular fluid. In presence of protein the fractional uptakes by 70:30 DMPC:DOPG liposomes and 50:50 DMPC:DOPG liposomes are 82 and 90%, respectively, at 125 muM drug amitriptyline. In the absence of liposomes, 67% of the drug is taken up by the protein in a 2% (w/w) BSA, 125 muM amitriptyline solution. Thus, addition of 50:50 DMPC:DOPG liposomes reduces the free drug concentration by a factor of about 3.5, making them attractive candidates for drug detoxification.     

Influence of physical and chemical heterogeneity shape on thin film rupture

It is known that the breakup times for thin liquid films on solid surfaces can be substantially smaller if the surface is heterogeneous, either chemically or physically. In this paper we explore issues related to the effect of the shape of the physical and chemical heterogeneities on the breakup time and the thinning behavior. We consider two shapes, sinusoidal and exponential, for both physical and chemical gradients and compare the breakup times for these two different forms of gradients. Furthermore, the wavelength of the sinusoidal gradients and the length scale of the exponential gradients are varied and the effects of these on the breakup times and the film evolution are determined. For the sinusoidal gradients, we also obtain analytical results for shape evolution that are valid at short times and for small amplitude perturbation of the physical/chemical heterogeneities. The fastest growing modes are determined for spinodal breakup and also for both shapes (sinusoidal and exponential) of physical and chemical heterogeneities. The breakup times for the fastest growing modes from the linear and the nonlinear studies are compared for spinodal breakup and these results are also compared with those for both chemical and physical heterogeneities, of both sinusoidal and exponential shapes. Results show that the presence of heterogeneities, in general, accelerates the breakup of the film. In the linear regime, the growth rates are the same for the chemical and physical heterogeneities and spinodal breakup, and the effect of the heterogeneities is manifested as increased amplitude of initial perturbation. The effect of the chemical and physical heterogeneities dominate the film dynamics at early times, becoming less important at later times. The growth rates and equivalently the breakup times for the films on heterogeneous surfaces depend on the length scale over which physical/chemical gradients occur, and as the length scale approaches zero, which implies that the gradients become very steep, the effect of the heterogeneities on the breakup times becomes small.     

Cobalt-catalyzed aziridination with diphenylphosphoryl azide (DPPA): direct synthesis of N-phosphorus-substituted aziridines from alkenes

A new catalytic aziridination system that consists of cobalt(II) tetraphenylporphyrin [Co(TPP)] as the catalyst and diphenylphosphoryl azide (DPPA) as the nitrene source has been developed. The cobalt-based catalytic system allows direct synthesis of N-phosphorus-substituted aziridines from alkenes with dinitrogen as the byproduct. Cobalt ion seems essential to the catalytic aziridination with DPPA as no or only trace amounts of the desired products were observed with other metal complexes of tetraphenylporphyrin.     

Effect of NaClO4 concentration on electrolytic behaviour of corn starch film for supercapacitor application

Polymer electrolyte has seen tremendous growth after works of Fenton & Armand, and energy devices are being produced at commercial level. Today’s social lifestyle needs miniaturized energy devices at every step of life; consequently, they add up to chemical garbage of the world. The sustainable development in the field needs eco-friendly energy devices. Hence, starch (being at low cost, abundant in nature and eco-friendly) has received great scientific attention. In recent past, many attempts have been made to modify the various starches to get fast ion-conducting materials. In our laboratory, also, wheat, potato, rice and arrowroot starches have been modified with different sodium salts, and in each case, considerably high-conducting (>10⁻³ S/cm) films have been found. In present case, also, a high-conducting transparent film (10⁻² S/cm) is obtained with corn starch and NaClO₄ salt after being crosslinked with glutaraldehyde (GA). Bode plots (both phase and magnitude), capacitive-response plot, capacitive-frequency plots and linear sweep voltammetry curves are analysed to explain the possibility of using the prepared electrolyte in capacitive device. The larger electrochemical stability window (ESW) ~ 2.4 V and smaller ion relaxation time ~ 65 μs make it a potential candidate for device fabrication. The equivalent series resistance is ~6.252 Ω for 0.8-mm-thick sample.

     

HPLC–QTOF–MS/MS-based rapid screening of phenolics and triterpenic acids in leaf extracts of Ocimum species and their interspecies variation

Species of genus Ocimum are traditionally used for their medicinal and flavoring properties. These are rich sources of essential oils and found as an ingredient in many Ayurvedic preparations and food products. Phenolics and triterpenic acids are the medicinally active compounds mainly concentrated in the leaves of Ocimum species. This study aimed to develop an efficient and reliable analytical method for the rapid screening and characterization of phenolics and triterpenic acids in the leaf extracts of 6 Ocimum species using high-performance liquid chromatography coupled with electrospray ionization quadrupole time-of-flight tandem mass spectrometry (HPLC–ESI–QTOF–MS/MS). A total of 50 compounds were identified and characterized on the basis of their accurate MS and MS/MS information, out of which 23 compounds were confirmed by authentic standards. Identified compounds include 28 flavonoids, 4 propenyl phenol derivatives, 2 triterpenic acids, 11 phenolic acids, and 5 phenolic acid esters. The developed method was applied to study the interspecies variation of identified compounds. Significant variation in the distribution of identified phenolics and triterpenic acids was observed among studied Ocimum species. Hence, the established method provides an effective and reliable tool for screening and characterization of phytoconstituents in Ocimum species.     

Volatile constituents of Origanum vulgare L., 'thymol' chemotype: variability in North India during plant ontogeny

Essential oils derived from six different phenophases, namely early vegetative stage, late vegetative stage, early flowering stage, full flowering stage (FFS), late flowering stage and seed shattering stage of Origanum vulgare L. grown in Kumaon region of Uttarakhand, India were investigated by GC and GC-MS. A total of 38 constituents, representing 97.4-99.7% of the total oil composition, were identified. Major components of oils were thymol (40.9-63.4%), p-cymene, (5.1-25.9%), γ-terpinene (1.4-20.1%), bicyclogermacrene (0.2-6.1%), terpinen-4-ol (3.5-5.9%), α-pinene (1.6-3.1%), 1-octen-3-ol (1.4-2.7%), α-terpinene (1.0-2.2%), carvacrol (<0.1-2.1%), β-caryophyllene (0.5-2.0%) and β-myrcene (1.2-1.9%). Thymol, terpinen-4-ol, 3-octanol, α-pinene, β-pinene, 1,8-cineole, α-cubebene and (E)-β-ocimene were observed to be higher during FFS. The study showed that plant stage had a significant effect on the essential oil content and composition of O. vulgare grown in the hilly tracks of Northern India.