Size evolution of the vibrational predissociation process in Br2...Nen clusters: simulation and kinetic study

A hybrid quantum-classical simulation of the vibrational predissociation of Br2...Nen, (n = 2-11) clusters in the B electronic state is carried out. The time-evolution of the reactants, products, and intermediates is analyzed by a kinetic mechanism consisting of three elementary steps: direct vibrational predissociation (VP), intramolecular vibrational redistribution (IVR), and evaporative cooling (EC). The importance of intramolecular vibrational redistribution followed by evaporative cooling relative to direct vibrational predissociation is shown to increase rapidly with increasing cluster size. Final product state distributions reveal that only one or less Br2 stretching quantum per neon atom is required in order to achieve complete dissociation (n quanta for n < or = 9 and n - 1 for n = 10 and 11). The proportion of available energy going into translation is proposed as a parameter to study the statistical behavior of the Van der Waals clusters. It is shown to depend only on the number of remaining degrees of freedom, a characteristic of a statistical behavior, for n > or = 3.     

Reactivity of benzoyl chlorides in nonionic microemulsions: potential application as indicators of system properties

The solvolysis reactivity of benzoyl chlorides entails a high sensitivity on medium properties. A systematic study of the reaction of a series of these substrates, varying the electron-withdrawing character of the substituent, has been performed in nonionic microemulsions. The kinetic effects due to variation of microemulsion compositions can be assigned to modifications in system properties, to be precise, to modifications in interface properties. Microemulsion properties that are obtained from kinetic analysis of solvolysis show a good agreement with the characterization of the microemulsion that was made via 1H NMR and solvatochromic fluorescence probes. Benzoyl chlorides with electron-donating groups react through a dissociative mechanism, whereas electron-withdrawing groups favor an associative mechanism. A comparative analysis of reactivity between the different substrates at the interface shows a variation in the contributions of both reaction pathways, associative and dissociative, to the whole reaction mechanism. The confined media shift the point where the mechanism changes from an associative to a dissociative pathway, far away from the turning point in water. Furthermore, the change in mechanism can be modulated by modification of the microemulsion composition.     

Interfacial properties of self-organized TiO<Subscript>2</Subscript> nanotubes studied by impedance spectroscopy

The semiconductor properties of the interface TiO₂/electrolyte in high organized porous oxide structures were analyzed by means of impedance spectroscopy near the flat band potential. The impedance and capacitance studies performed on the as-anodized and thermally treated samples (anatase) indicate the presence of a duplex structure formed by (1) the oxide at the bottom of the pores and (2) the walls of pores with different donor densities and surface state concentrations.     

Production of recombinant bleaching enzymes from thermophilic microorganisms in fungal hosts

Cost-effective production of enzymes for industrial processes makes the appropriate selection of the host-vector expression system critical. We have developed two systems for the bulk production of bleaching enzymes from thermophiles. Kluyveromyces lactis has been developed as a secretion host employing expression vectors based on the 2μ-like plasmid pKD1 of Kluyveromyces drosophilarium. Our second system involves the filamentous fungus Trichoderma reesei. Fusion and nonfusion vectors have been constructed using the strong cellobiohydrolase 1 (cbh1) promoter. The KEX2 protease cleavage site and a 6 × HIS-tag have been incorporated to facilitate both cleavage and purification of the mature foreign proteins.     

Palladium-arene interactions in catalytic intermediates: an experimental and theoretical investigation of the soft rearrangement between eta1 and eta2 coordination modes

A series of dichloro-bridged arylbicycloheptylpalladium complexes have been synthesized and characterized by means of NMR spectroscopy. The compound [(C16H19)PdCl]2*CH2Cl2 with ortho and para methyl substituents at the arene has been characterized by means of X-ray diffraction techniques. The C(ipso) atom of the arene lies almost at the fourth planar coordination site of the metal [Pd-C(ipso) = 2.22(1) A (average)], and due to the arene's tilting, the substituted C(ortho) atom is relatively close to the metal atom [2.54(1) A (average)]. The coordinated C(ipso)-C(ortho) linkage, in a seemingly dihapto coordination, is anti with respect to the CH2 bridge of the bicycloheptyl unit. Variable-temperature NMR experiments for the para-substituted dimer 9 reveal restricted rotation of the two aryl groups about the corresponding C-C(ipso) bonds (DeltaE < or =17 kcal x mol(-1)). DFT-B3LYP calculations have been carried out on the known and similar monomer (phenylbicycloheptenyl)Pd(PPh3)I (4) and its related substituted derivatives. The essential results are as follows: (i) The potential energy surface for twisting the phenyl ring away from the symmetric eta(1) coordination in 4 is very flat (DeltaE < or = 1 kcal x mol(-1)) whereas an Atoms in Molecules analysis excludes the existence of an actual Pd-C(ortho) bond in the seemingly eta2-type conformer. (ii) Complete rotation of the unsubstituted phenyl ring is not facile but feasible. A significant strain affects the transition-state structure featuring a Pd-HC(aryl) agostic-type bond. The calculated destabilization of 10.3 kcal x mol(-1), with respect to the ground state, can be compared to the experimental barrier of the dimer 9. (iii) Various methyl-substituted derivatives of 4 have been optimized, and their structural and energetic trends are discussed. An almost ideal eta1 coordination is shown by the anti conformer of the C(ortho)-substituted complex due steric effects. For all of the other cases, a slipped eta2 coordination may be described. As a general conclusion, the unsaturated metal center receives pi electron density of the arene mainly through its C(ipso) atom. The effect may be slightly improved if the C(ortho) atom also gets closer to the metal, but in no case, does the slipped eta2 coordination seem to be crucial for the stability of the system.     

Interpretation of the Metabolic Enthalpy Change, ΔHmet,Calculated for Microbial Growth Reactions in Soils

The microcalorimetric method was used to calculate the metabolic enthalpy change per mol of glucose degraded by soil microorganisms, ΔH _met. This parameter has been calculated by microcalorimetry for many organic, inorganic and biochemical reactions, but there is only some information about its quantification for microbial growth reactions in soils. Values of ΔH _met were calculated for different soil samples collected in Galicia (Spain) and Campinas (Săo Paolo, Brazil). Exponential microbial growth was stimulated in all soil samples by the addition of glucose and power-time curves were recorded. Results showed changes in the values of ΔH _met calculated for all the soil samples, suggesting a dependence of this value with the microbial growth rate constant, with the percentage of growth, with the initial number of microorganisms of soil samples, with the quantity of glucose added and with the strain of bacteria growing in soil. The interpretation of variations of ΔH _met provides important qualitative and quantitative information. It reports data that allow to interpret from a qualitative point of view, the increase in biomass as a consequence of the degradation of the organic matter in soil, to understand changes in the percentages of soil organic matter and to know if the microbial population growing in differential soil samples is homogeneous. Therefore, to report that value would be very important in ecological studies, but beforehand, it is necessary to solve some problems that can appear in the experiments done to make the quantification . This revised version was published online in August 2006 with corrections to the Cover Date.     

Carbon fiber cylindrical microelectrode-based detector for the determination of antithyroid drugs

An amperometric flow-injection method for the determination of antithyroid drugs such as 6-methyl-2-thiouracil (MTU) using a carbon fiber cylindrical microelectrode-based detector is reported. A home-made flow-cell specially adapted for working with cylindrical microelectrodes ranging between 4 and 10 mm in length was used for this purpose. Methanol containing 0.05 mol l(-1) tetrabutylammonium perchlorate as the supporting electrolyte was employed, and a potential of +1.6 V was selected for the amperometric detection of MTU. No cleaning or electrode surface regeneration of the fiber was necessary during the whole working day. A limit of detection of 2.6x10(-7) mol l(-1) (37 mug MTU l(-1)) was achieved. The method was applied to the determination of MTU in spiked feed samples (peas and corn flour), at the 142 mug g(-1) level. The procedure involved the extraction of the drug in methanol, a clean-up step using Florisil cartridges and the use of the standard additions method. Recoveries of 81+/-6 and 85+/-8% were obtained for peas and corn flour, respectively.     

Gas chromatography/mass spectrometric study of non-commercial C-4-substituted 1,4-dihydropyridines and their oxidized derivatives

A gas chromatography/mass spectrometry (GC/MS) method for the qualitative and quantitative determination of the calcium-channel antagonists C-4-substituted 1,4-dihydropyridines, and their corresponding N-ethyl derivatives, is presented. Also, the electrochemical oxidation and the reactivity of the compounds with alkyl radicals derived from 2,2'-azobis-(2-amidinopropane) were monitored by GC/MS. Mass spectral fragmentation patterns for the C-4-substituted 1,4-dihydropy-ridine parent drugs were significantly different from those of their oxidation products, generated either by electrochemical oxidation or by reaction with alkyl radicals. However, for N-ethyl-1,4-dihydropyridine compounds it was not possible to detect the final products (pyridinium salts) using these experimental conditions.     

Influence of the pyridine methyl substituent position on the chemical changes of the NCS groups in the thermal decomposition of coordination compounds of the type Cu(NCS)2L2

The influence of the position of the CH₃ group in picoline and lutidine ligands on the degree of chemical change of the NCS groups in coordination compounds of the type Cu(NCS)₂L₂ (whereL=2-, 3- and 4-picoline, and 2,3-, 2,4-, 2,5-, 2,6-, 3,4- and 3,5-lutidine) is dealt with. The most marked effect of the CH₃ group is found to be exerted in position 4. This effect of the methyl group on the degree of chemical change points to the mutual influence of the ligands in coordination compounds of Cu(II).

---

Zusammenfassung Der Artikel befaßt sich mit dem Einfluß der Lage der CH₃ Gruppe in Pikolinen und Lutidinen als Liganden auf den Grad der chemischen Änderungen der Gruppen NSC in Koordinationsverbindungen des Typs Cu(NCS)₂L₂ (L=2-, 3- und 4-Pikoline, 2,3-, 2,4-, 2,5-, 2,6-, 3,4- und 3,5-Lutidine). Der ausgeprägteste Effekt der CH₃ Gruppe wurde in der Position 4 beobachtet. Dieser Einfluß der Methylgruppe auf das Ausmaß der chemischen Änderungen deutet auch auf die gegenseitige Wirkung der Liganden in Koordinationsverbindungen von Cu(II).

---

Résumé L'article a trait à l'influence de la position du groupe CH₂ dans les picolines et lutidines, en tant que ligands, sur le degré des changements chimiques des groupes SCN dans les composés de coordination du type Cu(SCN)₂L₂ (L=2-, 3 et 4-picoline, 2,3-, 2,4-,2,5-, 2,6-, 3,4- et 3,6-lutidine). L'effet le plus prononcé du groupe CH₃ s'observe en position 4. Cette influence du groupe méthyle sur le degré des changements chimiques indique aussi l'influence mutuelle des ligands dans les composés de coordination du Cu(II).

---

- , , NCS Cu(NCS)₂,L₂, L=2-, 3- 4- , 2.3-, 2.4-, 2.5-, 2.6-, 3.4- 3.5-. , 4. Cu(II).