Ultrasound‐assisted extraction method for the simultaneous determination of emerging contaminants in freshwater sediments

Sediments are the fate of several emerging organic contaminants, such as pharmaceuticals, personal care products and hormones, and therefore an important subject in environmental monitoring studies. In the present work, a simple and sensitive method was developed, validated and applied for the simultaneous extraction of atenolol, caffeine, carbamazepine, diclofenac, ibuprofen, naproxen, propranolol, triclosan, estrone, 17‐β‐estradiol and 17‐α‐ethinylestradiol using ultrasound‐assisted extraction from freshwater sediment samples followed by solid‐phase extraction clean‐up and liquid chromatography with tandem mass spectrometry detection. The solvent type and extraction pH were evaluated to obtain the highest recoveries of the compounds. The best method shows absolute recoveries between 54.0 and 94.4% at 50 ng/g concentration. The method exhibits good precision with relative standard deviation ranging from 1.0–16%. The detection and quantification limits ranged from 0.006–0.067 and 0.016–0.336 ng/g, respectively. The developed method was successfully applied to freshwater sediment samples collected from different sites in Jundiaí River basin of São Paulo State, Brazil. The compounds atenolol, caffeine, propranolol and triclosan were detected in all the sampling sites with concentrations of 13.8, 41.0, 28.5 and 176 ng/g, respectively.     

An integrated platform for gas-diffusion separation and electrochemical determination of ethanol on fermentation broths

An integrated platform was developed for point-of-use determination of ethanol in sugar cane fermentation broths. Such analysis is important because ethanol reduces its fuel production efficiency by altering the alcoholic fermentation step when in excess. The custom-designed platform integrates gas diffusion separation with voltammetric detection in a single analysis module. The detector relied on a Ni(OH)₂-modified electrode. It was stabilized by uniformly depositing cobalt and cadmium hydroxides as shown by XPS measurements. Such tests were in accordance with the hypothesis related to stabilization of the Ni(OH)₂ structure by insertion of Co²⁺ and Cd²⁺ ions in this structure. The separation step, in turn, was based on a hydrophobic PTFE membrane, which separates the sample from receptor solution (electrolyte) where the electrodes were placed. Parameters of limit of detection and analytical sensitivity were estimated to be 0.2% v/v and 2.90 μA % (v/v)⁻¹, respectively. Samples of fermentation broth were analyzed by both standard addition method and direct interpolation in saline medium based-analytical curve. In this case, the saline solution exhibited ionic strength similar to those of the samples intended to surpass the tonometry colligative effect of the samples over analyte concentration data by attributing the reduction in quantity of diffused ethanol vapor majorly to the electrolyte. The approach of analytical curve provided rapid, simple and accurate analysis, thus contributing for deployment of point-of-use technologies. All of the results were accurate with respect to those obtained by FTIR method at 95% confidence level.     

Insight into Signal Response of Protein Ions in Native ESI-MS from the Analysis of Model Mixtures of Covalently Linked Protein Oligomers

Native ESI-MS is increasingly used for quantitative analysis of biomolecular interactions. In such analyses, peak intensity ratios measured in mass spectra are treated as abundance ratios of the respective molecules in solution. While signal intensities of similar-size analytes, such as a protein and its complex with a small molecule, can be directly compared, significant distortions of the peak ratio due to unequal signal response of analytes impede the application of this approach for large oligomeric biomolecular complexes. We use a model system based on concatenated maltose binding protein units (MBPn, n = 1, 2, 3) to systematically study the behavior of protein mixtures in ESI-MS. The MBP concatamers differ from each other only by their mass while the chemical composition and other properties remain identical. We used native ESI-MS to analyze model mixtures of MBP oligomers, including equimolar mixtures of two proteins, as well as binary mixtures containing different fractions of the individual components. Pronounced deviation from a linear dependence of the signal intensity with concentration was observed for all binary mixtures investigated. While equimolar mixtures showed linear signal dependence at low concentrations, distinct ion suppression was observed above 20 μM. We systematically studied factors that are most often used in the literature to explain the origin of suppression effects. Implications of this effect for quantifying protein–protein binding affinity by native ESI-MS are discussed in general and demonstrated for an example of an anti-MBP antibody with its ligand, MBP.

Open image in new window

Graphical Abstract ?

     

Linear and nonlinear optical properties of cationic bipyridyl iridium(III) complexes: tunable and photoswitchable?

A series of cationic Ir(III) substituted bipyridyl ()(N(∧)N (N(∧)N-bpy) complexes incorporating electron-donor and -acceptor substituents, [Ir(C(∧)N-ppy-R')(2)(N(∧)N-bpy-CH═CH-C(6)H(4)-R)][X] (X(-) = PF(6)(-) or C(12)H(25)SO(3)(-)), 2 (a, R = NEt(2) and R' = Me; b, R = O-Oct and R' = Me; c, R = NO(2) and R' = C(6)H(13); C(∧)N-ppy = cyclometalated 2-phenylpyridine, [Ir(C(∧)N-ppy-Me)(2)(N(∧)N-bpy-CH═CH-thienyl-Me)][PF(6)], 2d, and the dithienylethene (DTE)-containing complex 2e have been synthesized and characterized, and their absorption, luminescence, and quadratic nonlinear optical (NLO) properties are reported. Density functional theory (DFT) and time-dependent-DFT (TD-DFT) calculations on the complexes facilitate a detailed assignment of the excited states involved in the absorption and emission processes. All five complexes are luminescent in a rigid glass at 77 K, displaying vibronically structured spectra with long lifetimes (14-90 μs), attributed to triplet states localized on the styryl-appended bipyridines. The second-order NLO properties of 2a-d and related complexes 1a-d with 1,10-phenanthrolines have been investigated by both electric field induced second harmonic generation (EFISH) and harmonic light scattering (HLS) techniques. They are characterized by high negative EFISH μβ values which decrease when the ion pair strength between the cation and the counterion (PF(6)(-), C(12)H(25)SO(3)(-)) increases. The EFISH response is mainly controlled by metal-to-ligand charge-transfer/ligand-to-ligand charge-transfer (MLCT/L'LCT) processes. A combination of HLS and EFISH techniques is used to evaluate both the dipolar and octupolar contributions to the total quadratic hyperpolarizability, demonstrating that the major contribution is controlled by the octupolar part. The incorporation of a photochromic DTE unit into the N(∧)N-bpy ligand (complex 2e) allows the luminescence to be switched ON or OFF. The photocyclisation of the DTE unit can be triggered by using either UV (365 nm) or visible light (430 nm), leading to an efficient quenching of the ligand-based 77 K luminescence, which can be restored upon irradiation of the closed form at 715 nm. In contrast, no significant modification of the EFISH μβ value is observed upon photocyclization, suggesting that the quadratic NLO response is dominated by the MLCT/L'LCT processes, rather than by the intraligand excited states localized on the substituted bipyridine ligand.     

Thermal behavior of residues (sludge) originating from the sugarcane industry

The Brazilian sugarcane industry shows a great amount of generated sludge which should be utilized adequately. Two sludge samples, aerobic and anaerobic, were collected. Both were evaluated by thermogravimetry and differential thermal analysis (DTA) as well as X-ray power diffraction. These compounds show variations of mass between 30 and 140 °C due to the dehydration stage. The DTA curves show that the compounds have an exothermic reaction between 450 and 550 °C, which indicates that this can be used as an energy source. Details concerning the kinetic parameters of the dehydration and thermal decomposition have also been described here. The kinetic study of these stages was evaluated in open crucibles under nitrogen atmosphere. The obtained data were evaluated with the isoconversional kinetic method. The results show that different activation energies were obtained for thermal decomposition.     

Ionic liquids as recycling solvents for the synthesis of magnetic nanoparticles

This work describes an easy synthesis (one pot) of MFe(2)O(4) (M = Co, Fe, Mn, and Ni) magnetic nanoparticles MNPs by the thermal decomposition of Fe(Acac)(3)/M(Acac)(2) by using BMI·NTf(2) (1-n-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) or BMI·PF(6) (1-n-butyl-3-methylimidazolium hexafluorophosphate) ionic liquids (ILs) as recycling solvents and oleylamine as the reducing and surface modifier agent. The effects of reaction temperature and reaction time on the features of the magnetic nanomaterials (size and magnetic properties) were investigated. The growth of the MNPs is easily controlled in the IL by adjusting the reaction temperature and time, as inferred from Fe(3)O(4) MNPs obtained at 150 °C, 200 °C and 250 °C with mean diameters of 8, 10 and 15 nm, respectively. However, the thermal decomposition of Fe(Acac)(3) performed in a conventional high boiling point solvent (diphenyl ether, bp 259 °C), under a similar Fe to oleylamine molar ratio used in the IL synthesis, does not follow the same growth mechanism and rendered only smaller NPs of 5 nm mean diameter. All MNPs are covered by at least one monolayer of oleylamine making them readily dispersible in non-polar solvents. Besides the influence on the nanoparticles growth, which is important for the preparation of highly crystalline MNPs, the IL was easily recycled and has been used in at least 20 successive syntheses.     

Efficient crystallization induced emissive materials based on a simple push-pull molecular structure

Solid state luminescent materials are the subject of ever growing interest both from a scientific and a technological point of view. Aggregation caused quenching (ACQ) processes however represent an obstacle to the development of most luminogens in the condensed phase. This is why particularly fascinating are those materials showing higher emission intensity in the solid state than in solution. Here we report on three 4-dialkylamino-2-benzylidene malonic acid dialkyl esters, very simple push-pull molecules, which are hardly emissive in solution and in the amorphous phase but become good emitters in the crystalline phase according to what has been indicated as crystallization induced emission (CIE). Thanks to combined emission and NMR spectroscopies at different temperatures on the prototype compound 4-dimethylamino-2-benzylidene malonic acid dimethyl ester in solution, we give full evidence that a restricted intramolecular rotation (RIR) phenomenon, in particular the hindered rotation around the aryl main axis of the compound, is at the origin of this behaviour. In addition, solid state photophysical and X-ray diffraction structural characterization allow us to identify J-dimeric interactions as responsible for the particularly intense emission of two of the three compounds. Moreover, by exploiting the compounds' acidochromic properties, applications in sensors and optoelectronics are envisaged.     

A Bus Driver Scheduling Problem: a?new mathematical model and a GRASP approximate solution

This paper addresses the problem of determining the best scheduling for Bus Drivers, a $\mathcal{NP}$ -hard problem consisting of finding the minimum number of drivers to cover a set of Pieces-Of-Work (POWs) subject to a variety of rules and regulations that must be enforced such as spreadover and working time. This problem is known in literature as Crew Scheduling Problem and, in particular in public transportation, it is designated as Bus Driver Scheduling Problem. We propose a new mathematical formulation of a Bus Driver Scheduling Problem under special constraints imposed by Italian transportation rules. Unfortunately, this model can only be usefully applied to small or medium size problem instances. For large instances, a Greedy Randomized Adaptive Search Procedure (GRASP) is proposed. Results are reported for a set of real-word problems and comparison is made with an exact method. Moreover, we report a comparison of the computational results obtained with our GRASP procedure with the results obtained by Huisman et al. (Transp. Sci. 39(4):491?C502, 2005).