The determination of traces of thiocyanate and copper(II) ions by cathodic stripping voltammetry

Cathodic stripping methods are described for the determination of traces of thiocyanate ions down to 2 × 10^-8 mol l^-1 and Cu(II) ions down to 1 × 10^-8 mol l^-1. The method involves electrolytic accumulation of copper(I) thiocyanate on the surface of a hanging mercury drop electrode followed by stripping of the deposit during the cathodic scan. For the determination of thiocyanate, a copper amalgam electrode can be used. Examples of application of the method for the determination of traces of thiocyanate in common salts, in saliva and urine as well as for the determination of copper(II) ions in tap water are described.     

A guest-induced assembly of a molecular box from methylcobaloxime and 1, 4-phenylenebisboronic acid

The guest-induced synthesis of a molecular box from methylaquacobaloxime and 1,4-phenylenebisboronic acid, with pyrazine (pz) as guest, is described. The resulting supramolecular species was characterized by X-ray structural analysis, 1H and 13C NMR spectroscopy, and low-resolution electrospray ionization (ES) mass spectrometry. The assembly was monitored by a time dependent 1H NMR experiment, which showed that the guest thermodynamically drives the assembly of the host. The effectiveness of pyrazine in this role arises from its having both the correct geometry and a sufficiently low pKa value. Several other ditopic ligands were tested, but none led to formation of an analogous product. However, a second supramolecular species was formed in the case of ethylenediamine (en). X-ray structural analysis and 1H and 13C spectroscopy revealed that this is closely related to the first, with a phenyl side removed and the pz bridge substituted by the en bridge.     

Electrochromic and structural characteristics of mesoporous WO<Subscript>3</Subscript> films prepared by a sol-gel method

The preparation of electrochromic films of mesoporous tungsten trioxide from tungstic acid and tungstic hexaethoxide precursors with the addition of an organic stabiliser via a sol-gel method is reported. These films have been structurally characterised and both the film morphology and crystalline composition of the films were found to be significantly dependent on the temperature at which the films were annealed and upon the choice of precursor. Films annealed at lower temperatures consisted of amorphous and hexagonal tungsten trioxide, whereas films annealed above 500 °C comprised solely of monoclinic WO₃. The electrochromic activity of the films was found to be equally dependent on method of preparation, and both the composition and the structure of the WO₃ films were shown to clearly influence the colouration efficiency of the films.Dedicated to Zbigniew Galus on the occasion of his 70^th birthday.     

Evaluation of cellulase preparations for hydrolysis of hardwood substrates

Seven cellulase preparations from Penicillium and Trichoderma spp. were evaluated for their ability to hydrolyze the cellulose fraction of hardwoods (yellow poplar and red maple) pretreated by organosolv extraction, as well as model cellulosic substrates such as filter paper. There was no significant correlation among hydrolytic performance on pretreated hardwood, based on glucose release, and filter paper activity. However, performance on pretreated hardwood showed significant correlations to the levels of endogenous β-glucosidase and xylanase activities in the cellulase preparation. Accordingly, differences in performance were reduced or eliminated following supplementation with a crude β-glucosidase preparation containing both activities. These results complement a previous investigation using softwoods pretreated by either organosolv extraction or steam explosion. Cellulase preparations that performed best on hardwood also showed superior performance on the softwood substrates.     

Modified electrodes based on lipidic cubic phases

The lipidic cubic phase can be characterized as a curved bilayer forming a three-dimensional, crystallographical, well-ordered structure that is interwoven by aqueous channels. It provides a stable, well-organized environment in which diffusion of both water-soluble and lipid-soluble compounds can take place. Cubic phases based on monoacylglycerols form readily and attract our interest due to their ability to incorporate and stabilize proteins. Their lyotropic and thermotropic phase behaviour has been thoroughly investigated. At hydration over 20%, lipidic cubic phases Ia3d and Pn3m are formed. The latter is stable in the presence of excess water, which is important when the cubic phase is considered as an electrode-modifying material. Due to high viscosity, the cubic phases can be simply smeared over solid substrates such as electrodes and used to host enzymes and synthetic catalysts, leading to new types of catalytically active modified electrodes as shown for the determination of cholesterol, CO(2), or oxygen. The efficiency of transport of small hydrophilic molecules within the film can be determined by voltametry using two types of electrodes: a normal-size electrode working in the linear diffusion regime, and an ultramicroelectrode working under spherical diffusion conditions. This allows determining both the concentration and diffusion coefficient of the electrochemically active probe in the cubic phase. The monoolein-based cubic phase matrices are useful for immobilizing enzymes on the electrode surface (e.g., laccases from Trametes sp. and Rhus vernicifera were employed for monitoring dioxygen). The electronic contact between the electrode and the enzyme was maintained using suitable electroactive probes.     

Adsorption—Nucleation and growth mechanism of CuSCN monolayer formation on a copper amalgam electrode in thiocyanate solutions

Using voltammetric, galvanostatic and potentiostatic techniques, the electrodeposition of cuprous thiocyanate on a copper amalgam electrode has been studied in acidic solutions containing various thiocyanate ion concentrations. Under the conditions used, the formation of two successive monolayers of CuSCN could be studied before the onset of bulk deposition. It was found that the formation of the first monolayer proceeds according to a complex adsorption-nucleation and growth mechanism. In the first stage, cuprous thiocyanate is adsorbed on the amalgam electrode; in the second, the disordered layer of adsorbate rearranges to form two-dimensional crystalline centres; and in the third stage, these centres grow, completing the formation of the entire monolayer. The second monolayer is formed in a much simpler way, according to a mechanism of two-dimensional, instantaneous nucleation and growth. At high thiocyanate ion concentration, the formation of the CuSCN layer is obscurred by the extensive formation of solution soluble species.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Determination of didanosine in human serum by on-line solid-phase extraction coupled to high-performance liquid chromatography with electrospray ionization tandem mass spectrometric detection: application to a bioequivalence study

A method based on solid-phase extraction coupled to liquid chromatography with positive ion electrospray ionization and tandem mass spectrometric detection was developed for the determination of didanosine in human serum, using lamivudine as internal standard. The acquisition was performed in the multiple reaction monitoring mode, monitoring the transitions m/z 237 --> 136.7 for didanosine and m/z 230 --> 111.7 for lamivudine. The method was linear over the range studied (10-1500 ng ml(-1)), with r(2) > 0.98, and the run time was 5 min. The intra- and inter-assay precisions were < or =10% and the intra- and inter-assay accuracies were >95%. The absolute recoveries were 99.8% (10 ng ml(-1)), 98.4% (30 ng ml(-1)), 91.5% (700 ng ml(-1)) and 94.7% (1200 ng ml(-1)). The limits of detection and quantitation were 5 and 10 ng ml(-1), respectively. The method was applied to a bioequivalence study, in which 24 healthy adult volunteers (12 men) received single oral doses (200 mg) of reference and test didanosine formulations (buffered powder for oral solutions), in an open, two-way, randomized, crossover protocol. The 90% confidence interval of the individual ratios (test formulation/reference formulation) for C(max) (peak serum concentration) and AUC(0-inf) (area under the serum concentration versus time curve from time zero to infinity) were within the range 80-125%, which supports the conclusion that the two formulations are bioequivalent regarding the rate and extent of didanosine absorption.     

Experiences in the measurement of RBC-bound IgG as markers of cell age

An immunologically mediated pathway has been largely accepted to be one of the mechanisms involved in the clearance of senescent or prematurely damaged RBC. According to this pathway, RBC removal is mediated by binding of naturally occurring IgG to clustered integral membrane proteins, followed by complement deposition. The validation of an immunoenzymatic method for the detection of RBC-bound autologous IgG is presented. The use of RBC-bound IgG as an index related to red cell age was evaluated by measuring IgG binding in RBC treated with the clustering agent ZnCl2, in density fractionated RBC and in a selected group of patients expected to have an altered RBC life span. The immunoenzymatic method for IgG detection resulted to be reproducible (CV = 3.4%). IgG binding to in vitro clustered RBC was found to be enhanced to a very great extent, about 20 times higher with respect to untreated RBC. A slight but significant increase (about 1.8-fold) in membrane-bound IgG was observed in the highest density fraction of normal RBC, which constituted 1% of the total cells. A significantly greater number of RBC-bound IgG was measured in splenectomized beta-thalassemia intermedia patients and in subjects with secondary decreases in the C3 complement fraction concentration.     

A novel highly selective chiral auxiliary for the asymmetric synthesis of L- and D-alpha-amino acid derivatives via a multicomponent Ugi reaction

This paper describes the synthesis of a bicyclic beta-amino acid scaffold in both pure enantiomeric forms and its application as chiral auxiliary in an intramolecular version of the Ugi multicomponent reaction (U-5C-4CR) to prepare alpha-amino acid derivatives of both D- and L-series in a straightforward and very stereoselective manner. The mild conditions required for the Ugi condensation and for the removal of the chiral auxiliary make this method very attractive to prepare a wide range of differently structured N-alkylated and unalkylated amino acid derivatives.