Modelling far-field entrainment in compressible flows

A procedure that generates steady-states with accurate far-field entrainment is described here. It can be applied to any existing code originally designed for unsteady simulations. Such steady-states are obtained with physical-time damping, introduced through a dual time stepping methodology to effectively eliminate all transient fluctuations without affecting spatial resolution. Far-field entrainment is guaranteed by using properly selected local boundary conditions. Hence, reference profiles with accurate far-field entrainment are generated from the very same code that will eventually use them in unsteady simulations. This new procedure is tested on an unsteady code designed for compressible planar mixing-layer simulations at arbitrary Mach numbers. It is numerically stable for a wide range of Mach numbers and velocity ratios.     

On the morphology and stability of Au nanoparticles on TiO2(110) prepared from micelle-stabilized precursors

The morphology and stability of well-ordered, nanostructured Au/TiO2(110) surfaces, prepared by deposition of Au loaded micelles on TiO2(110) substrates and subsequent oxidative removal of the polymer shell in an oxygen plasma, was investigated by noncontact AFM, SEM and XPS. The resulting arrays of Au nanoparticles (particle sizes 1-5 nm) form a nearly hexagonal pattern with well-defined interparticle distances and a narrow particle size distribution. Particle size and particle separation can be controlled independently by varying the Au loading and the block-copolymers in the micelle shell. The oxygen plasma treatment does not affect the size and distance of the Au nanoparticles; the latter are fully metallic after subsequent UHV annealing (400 degrees C). The particles are stable under typical CO oxidation reaction conditions, up to at least 200 degrees C, making these surfaces ideally suited as defined model systems for catalytic studies. Significant changes in the height distributions of the Au nanoparticles are found upon 400 degrees C annealing in O2. For adlayers with small interparticle distances, this leads to a bimodal particle size distribution, which together with the preservation of the lateral order points to Ostwald ripening.     

Reaction of oleic acid particles with NO3 radicals: Products, mechanism, and implications for radical-initiated organic aerosol oxidation

The heterogeneous reaction of liquid oleic acid aerosol particles with NO3 radicals in the presence of NO2, N2O5, and O2 was investigated in an environmental chamber using a combination of on-line and off-line mass spectrometric techniques. The results indicate that the major reaction products, which are all carboxylic acids, consist of hydroxy nitrates, carbonyl nitrates, dinitrates, hydroxydinitrates, and possibly more highly nitrated products. The key intermediate in the reaction is the nitrooxyalkylperoxy radical, which is formed by the addition of NO3 to the carbon-carbon double bond and subsequent addition of O2. The nitrooxyalkylperoxy radicals undergo self-reactions to form hydroxy nitrates and carbonyl nitrates, and may also react with NO2 to form nitrooxy peroxynitrates. The latter compounds are unstable and decompose to carbonyl nitrates and dinitrates. It is noteworthy that in this reaction nitrooxyalkoxy radicals appear not to be formed, as indicated by the absence of the expected products of decomposition or isomerization of these species. This is different from gas-phase alkene-NO3 reactions, in which a large fraction of the products are formed through these pathways. The results may indicate that, for liquid organic aerosol particles in low NOx environments, the major products of the radical-initiated oxidation (including by OH radicals) of unsaturated and saturated organic compounds will be substituted forms of the parent compound rather than smaller decomposition products. These compounds will remain in the particle and can potentially enhance particle hygroscopicity and the ability of particles to act as cloud condensation nuclei.     

Behaviour of discontinuous gold films on SrTiO3 substrates under annealing

Morphological changes of thin, discontinuous gold films on SrTiO₃ substrates, resulting from evaporation in the temperature range of 1143-1278 K, have been investigated by means of scanning electron microscopy (SEM) and atomic force microscopy (AFM). If the gold covered fraction of the surface is small, the evaporation kinetics can be related to the desorption of adatoms. Measuring the density of the gold beads and the time dependence of the effective thickness of the film as calculated from the diameter of the beads, the following parameters have been determined: the surface diffusion length of the gold adatoms, , the mass transfer surface diffusion coefficient, and the evaporation flux, .     

Tellurium in organic synthesis: a new approach to trisubstituted γ-butyrolactones with trans-trans relative stereochemistry. Total enantioselective synthesis of (−)-Blastmycinolactol, (+)-Blastmycinone, (−)-NFX-2, and (+)-Antimycinone

The total synthesis of (−)-Blastmycinolactol, (+)-Blastmycinone, (−)-NFX-2, and (+)-Antimycinone was accomplished in few steps in high yields and ee, starting from enantiomerically enriched (S)-Z-vinylic hydroxytellurides.     

Ti-SBA-15介孔材料用于磷酸化肽的高效富集

结合基质辅助激光解吸飞行时间质谱(MALDI-TOF MS)检测技术,考察了Ti-SBA-15介孔材料对β-酪蛋白酶解产物中磷酸化肽的选择性富集性能。实验结果显示,含Ti和Si物质的量比为0.08的Ti-SBA-15介孔材料可选择性地对β-酪蛋白酶解产物中的磷酸化肽进行选择性富集;对于β-酪蛋白和牛血清白蛋白物质的量比为1:100的蛋白质酶解混合液,Ti-SBA-15仍能实现对其磷酸化肽的有效富集。上述结果表明,作为一种多孔、高比表面积的磷酸化多肽的选择性吸附材料,Ti-SBA-15有望在磷酸化蛋白质组的分析中得到广泛的应用。     

Über die Struktur von geschmolzenem Selendioxid

About the Structure of Molten Selenium Dioxide The Raman spectra of molten and gaseous selenium dioxide are nearly identical. The number of bands indicates the existence of a temperature depending equilibrium of monomeric and dimeric selenium dioxide in the molten and the gaseous state. A chain structure as in the crystal could not be found. An oxygen-bridged planar ring seems most likely for the structure of the dimer. Broadening of bands two intense, polarized lines at ν = 955/966 cm^?1 indicate an equilibrium of the trans-(C_2h) with the cis-structure (C_2v).     

超临界流体色谱法测定银杏叶提取物中的黄酮类化合物

采用超临界流体色谱法分离测定了银杏叶提取物水解后的三个甙元－－槲皮素、山奈酚、异鼠李素的含量。以苯基柱为固定相,二氧化碳－乙醇－磷酸９０：９．９８：０．０２Ｖ／Ｖ）为流动相,三个黄酮甙元获得良好的分离,利用各甙元的转换因子计算了黄酮化合物的总黄酮的含量,这种方法定量结果准确,重现性好。     

Gas chromatography of trimethylsilyl derivatives of alpha-methoxyalkyl hydroperoxides formed in alkene-O3 reactions

The synthesis of trimethylsilyl (TMS) hydroperoxide derivatives for gas chromatography (GC) was studied using N-methyl-N-(trimethylsilyl) trifluoroacetamide (MSTFA) for derivatization of cumene hydroperoxide (CMOOH) (alpha,alpha'-dimethylbenzyl hydroperoxide) and alpha-methoxyalkyl hydroperoxides formed by liquid- and gas-phase ozonolysis of a series of terminal alkenes in the presence of methanol (CH3OH). Derivatization efficiencies >90% were achieved over a wide range of solution concentrations. The major compounds identified by GC-mass spectrometry of the derivatized products of alkene-O3 reactions were alpha-methoxyalkyl hydroperoxides, methyl esters, and aldehydes. Yields of alpha-methoxyalkyl hydroperoxides and methyl esters were quantified using effective carbon numbers (ECNs) and used to determine the yields of stabilized Criegee intermediates (SCIs) from gas-phase ozonolysis reactions. Such measurements are important for understanding the atmospheric chemistry of alkene emissions. SCI yields measured for the reactions of 1-octene [CH3(CH2)5CH=CH2], 1-nonene [CH3(CH2)6CH=CH2 ], and 2-methyl-1-octene [CH3(CH2)5C(CH3)=CH2] are consistent with previous measurements or predictions based on literature data. SCI yields measured for the reactions of 1-decene [CH3(CH2)7CH=CH2], 1-dodecene [CH3 (CH2)9CH=CH2], and 1-tetradecene [CH3(CH2)11CH=CH2] are much lower than expected, apparently due to side reactions with low volatility aldehydes that form peroxyhemiacetals, which are not amenable to GC analysis. In general, the results indicate that off-line MSTFA derivatization can be an efficient means for increasing the stability of thermally labile hydroperoxides for identification and quantitation by GC, and offers a new approach for the analysis of these environmentally important compounds.