Rational solutions to Q3δ in the Adler-Bobenko-Suris list and degenerations

We derive rational solutions in Casoratian form for the Nijhoff-Quispel-Capel (NQC) equation by using the lattice potential Korteweg-de Vries (lpKdV) equation and two Miura transformations between the lpKdV and the lattice potential modified KdV (lpmKdV) and the NQC equation. This allows us to present rational solutions for the whole Adler-Bobenko-Suris (ABS) list except Q4. The known Miura transformation for soliton solutions between the NQC equation and Q3_δ and the known degenerations for solitons from Q3_δ to Q2, Q1_δ, H3_δ, H2 and H1 in the ABS list are used. We show that the Miura transformation and degenerations are valid as well for rational solutions which are usually considered as “long-wave-limit” of solitons. All the rational solutions can be expressed in terms of {z _j} which are linear functions of (n, m).     

镝掺杂锆钛酸铅镧透明陶瓷的结构和电光性能

针对锆钛酸铅镧(PLZT)电光陶瓷在光调制器应用中存在工作电压偏高、场致滞后明显等不足,以镧系镝(Dy)元素对锆钛酸铅镧(Pb0.88La0.12)(Zr0.4Ti0.6)0.96O3 [PLZT(12/40/60)]线性电光材料进行掺杂改性.采用热压技术研制镝掺杂锆钛酸铅镧[Pb0.88(La1-xDyx)0.12](Zr0.40Ti0.60)0.96O3](PLDZT)(x=0.1～0.5)透明电光陶瓷.系统考察了PLDZT透明陶瓷的光学性能和电光特性及其与材料结构的相关性.研究表明,Dy掺杂导致材料晶格畸变,微量Dy掺杂有效提高了 PLZT(12/40/60)透明陶瓷的光学透过率,并且使典型的线性电光材料呈现二次电光效应特征,二次电光系数R约为5.59×10-15m2/V2;同时掺杂改性的PLDZT(x=0.1)透明陶瓷的驱动电压较未改性PLZT材料明显降低.     

Optical focusing feature of single element in 128×128 elements electrically controllable cylindrical liquid crystal lens array

<正>A 128×128 elements cylindrical liquid crystal(LC) lens array with electrically controllable focal length is proposed.The cylindrical LC lens array uses transparent indium tin oxide(ITO) films as electrode,avoiding to affect the optical path operating in the voltage-off status.As the top electrode of the cylindrical LC lens array contacts with LC,the operation voltage root-mean-square(RMS) amplitude can be as low as 1.4 V and the response time is about 20-30 ms.The special optical focusing feature of the cylindrical LC lens array is got.And the focal length of this array is about 60-450μm.     

Photonic ultra-wideband monocycle pulses generation using semiconductor optical amplifier and electro-absorber in parallel

A scheme for photonic generation of ultra-wideband （UWB） pulses using a semiconductor optical amplifier （SOA） and an electro-absorber （EA） in parallel is proposed and numerically demonstrated. By adjusting the time delay between two pump signals incident into the SOA and the EA, we can obtain monocycle pulses with reversed polarities and different bandwidths. The proposed method is flexible in pulse shaping and easy in practical optimization.     

Investigation on activating individual living monocytic U937 cell by interleukin-6 using Raman tweezers

We investigate the activation of living monocytic U937 cells induced by interleukin-6 （IL-6） at the single cell level. We employ home-built Raman tweezers to measure the Raman spectra of living U937 cells with and without IL-6 at the single cell level. Raman peaks of amide III, amide I, DNA backbone, as well as guanine and adenine in U937 cells, change at 1312, 1652, 1090, and 1576 cm ？1 , respectively, shortly after IL-6 is added in the medium. The change is a dynamic temporal process. In the activation process of U937 cells induced by IL-6, the protein signals recover in 20 min, while the nucleic acid signals continue to increase for 20 min. The results reveal that the biochemical cascades of activation in signal transduction induced by IL-6 can be investigated in situ at the single cell level.     

Meter-long CeO2/YSZ/Y2O3 buffer layers for YBCO coated conductors using DC reactive sputtering

This paper reports CeO₂/YSZ/Y₂O₃ buffer layers deposited on biaxially textured NiW substrates by DC reactive sputtering in a reel-to-reel system. The effect of partial pressure of water vapor (P_H2O) on surface morphology and orientation of the Y₂O₃ films was examined. The obtained CeO₂/YSZ/Y₂O₃ buffer layers exhibit a highly biaxial texture, with in- and out-of-plane FWHM values respectively in the range of 6.0–7.0° and 4.5–5.5°. Crystallographic consistency of CeO₂/YSZ/Y₂O₃ along meter length is excellent. Atomic force microscope observation (AFM) reveals a smooth, continuous and crack-free surface with a Root-mean-square roughness (RMS) lower than 10 nm.     

利用Hyperion数据进行环境星HSI红边参数真实性检验

针对我国新发射运行的HJ-1A星HSI数据,利用高光谱分辨率的Hyperion数据进行了HJ-1A星HSI的光谱模拟,提取了红谷位置、红边位置、红边斜率和红边振幅等4个主要的红边参数,对真实与模拟环境星HSI数据的红边参数进行了对比分析,从而以Hyperion数据为参照检验了环境星HSI红边参数的真实性。研究结果显示,环境星HSI与模拟HSI的红边范围光谱反射率平均相关系数为0.946,标准差为0.011,为极显著相关,两种数据在红边范围内的光谱反射率变化高度一致;4个红边参数的相关系数分别为0.414,0.543,0.808和0.802,并且随植被覆盖度的变化呈现出明显的规律性,模拟与真实红边参数差值标准差分别为5.75,1.86,5.7e-4和0.024,认为环境星HSI的红边参数可以较好反映该区域植被变化所造成的红边光谱特征差异。     

红外辐射在水雾中衰减计算的修正方法研究

水雾系统对红外光谱有着强烈的衰减作用,因此在军事目标的各种制导对抗中被予以高度的关注。以Mie散射理论为基础,分析了粒子对红外光谱前向散射的聚集特性,定义了近前向散射比,并确定了在应用朗伯比尔定律时需修正的粒子尺度和散射半角的范围。通过大量计算发现,单独将粒子尺度和散射半角的乘积作为独立变量计算的视消光系数不够精确。在中远红外波段,前向散射附近的小角度内散射强度积分与粒子尺度和散射角都成正比,若红外波长为定值,则与粒子半径成正比。最后根据前向散射规律给出了两个不单独以x.θ为变量的经验计算公式,使得对水雾消光的修正计算更加简便精确。     

应用ICP-AES法研究云南普洱茶稀土含量

应用电感耦合等离子体发射光谱法(ICP-AES)对云南省普洱茶主产地采集的150份普洱茶样品的稀土含量进行检测研究.检测样品中稀土的含量在0.26～4.07 mg·kg-1范围.依据国家标准GB 2762-2005<食品中污染物限量>中稀土限量标准2 mg·kg-1考核,43%的普洱茶样品被检出稀土含量超标.云南普洱熟茶和生茶不同的生产工艺会造成普洱茶稀土含量的差异,并影响产品质量.云南普洱茶不同主产地区之间的稀土含量存在差异,个别地区的普洱茶稀土质量安全控制情况不容乐观.     

双脉冲高功率脉冲调制器的设计

采用螺旋线和折叠线技术相结合的方法,设计了一种基于水介质高功率脉冲调制器。该调制器采用了两个开关,通过控制两个开关的导通时刻,可以在两个负载上得到脉冲长度相等的两个脉冲。对该种折叠型传输线的波过程进行了详细分析,给出了过渡段部分阻抗等参数对负载电压的影响;用Pspice电路软件对脉冲形成线的充电电压和二极管电压、电流进行了模拟;最后利用高压同轴电缆,对该种类型调制器进行了低压情况下的验证实验,实验结果与理论分析、模拟研究一致。此种类型的调制器具有结构紧凑、可同时输出两个脉冲的优点。