Ir(I)-catalyzed enantioselective hydrogenolysis of 3-aryl-3-hydroxyisoindolin-1-ones

An enantioselective hydrogenolysis of 3-aryl-3-hydroxyisoindolin-1-ones under H₂ has been developed by using Ir(I)/(R)-MeO-Biphep complex as a catalyst. Cyclic diaryl methylamides were obtained in moderate to excellent yields and up to 92% ee.     

Calix[4]arene-Based Triple-Stranded Metallohelicate in Water

The title complex is a triple-stranded metallohelicate organized by the self-assembly of 5,17-difunctionalized calix[4]arenes and metal cations with octahedral coordination geometry. Due to hydrophilic triethylene glycol chains on the lower rim of the calix[4]arene, the metallohelicate can encapsulate cationic guests in water. NMR and UV-vis titration experiments reveal that the metallohelicate captures a pyridinium guest with an alanine derivative to form a host-guest complex with a host-guest ratio of 1 : 1. CD spectroscopy confirms the bias of the P- and M-helical sense of the metallohelicate by the captured guest. The metallohelicate captures two molecules of dicationic N,N’-dimethyl-DABCO and monocationic N-methyl quinuclidine, exhibiting a positive allosteric effect. ¹H NMR titration experiments indicate that the bound guests are in close proximately to the aromatic rings of the ligands. Molecular mechanics calculations based on the UV-vis and NMR observations suggest that the first guest preorganizes the conformation of the metallohelicate to facilitate access of the second guest to the cavity.     

计算有机化合物脂水分配系数的新方法

A new method is presented for the calculation of octanol/water partition coefficients. On the basis of summation of atomic contributions, our algorithm, namely; XLOGP, also incorporate correction factors into the calculation. Multivariate regression analysis was performed on a training database of 1831 organic compounds with diverse structures to give the final model. The correlation coefficients for the whole set fitting is 0.968 and the standard deviation is 0.37. The result shows that our model is accurate enough for logP estimation in QSAR studies. Compared to other similar approaches, our method gives better results and is more convenient to use.     

Kinetics of the gas‐phase reactions of cyclo‐CF2CFXCHXCHX – (X = H,F, Cl) with OH radicals at 253–328 K

Rate constants were determined for the reactions of OH radicals with halogenated cyclobutanes cyclo‐CF₂CF₂CHFCH₂? (k₁), trans‐cyclo‐CF₂CF₂CHClCHF? (k₂), cyclo‐CF₂CFClCH₂CH₂? (k₃), trans‐cyclo‐CF₂CFClCHClCH₂? (k₄), and cis‐cyclo‐CF₂CFClCHClCH₂? (k₅) by using a relative rate method. OH radicals were prepared by photolysis of ozone at a UV wavelength (254 nm) in 200 Torr of a sample reference H₂O? O₃? O₂? He gas mixture in an 11.5‐dm³ temperature‐controlled reaction chamber. Rate constants of k₁ = (5.52 ± 1.32) × 10^?13 exp[–(1050 ± 70)/T], k₂ = (3.37 ± 0.88) × 10^?13 exp[–(850 ± 80)/T], k₃ = (9.54 ± 4.34) × 10^?13 exp[–(1000 ± 140)/T], k₄ = (5.47 ± 0.90) × 10^?13 exp[–(720 ± 50)/T], and k₅ = (5.21 ± 0.88) × 10^?13 exp[–(630 ± 50)/T] cm³ molecule^?1 s^?1 were obtained at 253–328 K. The errors reported are ± 2 standard deviations, and represent precision only. Potential systematic errors associated with uncertainties in the reference rate constants could add an additional 10%–15% uncertainty to the uncertainty of k₁–k₅. The reactivity trends of these OH radical reactions were analyzed by using a collision theory–based kinetic equation. The rate constants k₁–k₅ as well as those of related halogenated cyclobutane analogues were found to be strongly correlated with their C? H bond dissociation enthalpies. We consider the dominant tropospheric loss process for the halogenated cyclobutanes studied here to be by reaction with the OH radicals, and atmospheric lifetimes of 3.2, 2.5, 1.5, 0.9, and 0.7 years are calculated for cyclo‐CF₂CF₂CHFCH₂? , trans‐cyclo‐CF₂CF₂CHClCHF? , cyclo‐CF₂CFClCH₂CH₂? , trans‐cyclo‐CF₂CFClCHClCH₂? , and cis‐cyclo‐CF₂CFClCHClCH₂? , respectively, by scaling from the lifetime of CH₃CCl₃. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 532–542, 2009     

Invited Lecture. Ferroelectric liquid crystalline polymers and related model compounds with a low–moderate degree of polymerization

Abstract

Ferroelectric liquid crystalline polymers (FLCPs) with a low-moderate degree of polymerization were synthesized. These had a comb structure; the main chain was polyacrylate and the side chain consisted of a flexible spacer, a core and an optically active chiral end group. They exhibited electro-optic switching times ranging from a few milliseconds to a few seconds in the S*_c phase. As the molecular weight M _n increased, the range of the S*_c shifted to higher temperatures. At a given temperature, the switching time increased with M _n .

Spontaneous polarizations P _s , apparent cone angles 2θ, electro-optic switching times τ and rotational viscosities η of some polyoxyethylene FLCPs and corresponding low molecular weight ferroelectric liquid crystal materials (FLCs) were also measured. This is the first report of polyoxyethylene FLCPs. There was no significant difference in P _s and 2θ, which shows that the arrangement of the side chains in the FLCP is similar to that of the molecules in ordinary FLC. On the contrary, τ and η for the FLCPs were 10²–10³ times as large as those for FLCs. The rotational viscosity of the FLCP was mainly dependent on the side chain structure rather than on the spacer. Therefore collisions between adjacent side chains cause large η values in FLCPs rather than hindrance to side chain gyration due to the spacer group. By combining FLCPs with ITO-coated plastic substrates, a large area matrix driven display has been made. Although an improvement in switching time is still needed, a flexible and lightweight display like a sheet of paper will be available in the near future.     

SbF5/PAF—a novel fluorinating reagent in preparing fluorine compounds

A novel fluorination reagent and catalyst, SbF₅/PAF (porous aluminum fluoride), was prepared by impregnating SbCl₅ into PAF and then treating with anhydrous hydrogen fluoride. The prepared reagent had an excellent catalytic activity in halogen-exchange, and also improved the properties of SbF₅, such as hydroscopicity, corrosion, and toxicity. SbF₅/PAF was successfully used in organic synthesis as a fluorinating reagent, and a fixed bed catalyst for F/Cl exchange.     

The reaction process of firefly bioluminescence triggered by photolysis of caged-ATP

The reaction process of firefly bioluminescence was studied by photolyzing caged-ATP to adenosine triphosphate (ATP) within 100 ms. The intensity of luminescence increases markedly to reach a maximum within 1 s, maintains almost the same intensity up to 5 s and then decays monotonically. The rise γ(1) and decay γ(2) rate constants were determined to be about 5 s(-1) and 1 × 10(-2) s(-1), respectively, so as to phenomenologically fit the time course. A second luminescence peak appears after around 350 s. The dependence of the rate constants on the concentrations of reactants and a viscous reagent revealed that two kinds of reaction contribute the observed time course: (1) an intrinsic reaction by ATP photolyzed from caged-ATP that is already trapped in luciferase; and (2) a diffusion-controlled reaction by free ATP in the buffer solution outside luciferase. Numerical analysis based on reaction kinetics related γ(1) and γ(2) to the rate constants of a three-step reaction model, and accurately described the effects of concentration of reactants and a viscous reagent on the time courses of bioluminescence. Thus, it has been clearly concluded that the binding mode of caged-ATP at the catalytic center of luciferase is very different from that of ATP.     

Photoionization-induced water migration in the amide group of trans-acetanilide-(H2O)1 in the gas phase

IR-dip spectra of trans-acetanilide-water 1:1 cluster, AA-(H(2)O)(1), have been measured for the S(0) and D(0) state in the gas phase. Two structural isomers, where a water molecule binds to the NH group or the CO group of AA, AA(NH)-(H(2)O)(1) and AA(CO)-(H(2)O)(1), are identified in the S(0) state. One-color resonance-enhanced two-photon ionization, (1 + 1) RE2PI, of AA(NH)-(H(2)O)(1) via the S(1)-S(0) origin generates [AA(NH)-(H(2)O)(1)](+) in the D(0) state, however, photoionization of [AA(CO)-(H(2)O)(1)] does not produce [AA(CO)-(H(2)O)(1)](+), leading to [AA(NH)-(H(2)O)(1)](+). This observation explicitly indicates that the water molecule in [AA-(H(2)O)(1)](+) migrates from the CO group to the NH group in the D(0) state. The reorganization of the charge distribution from the neutral to the D(0) state of AA induces the repulsive force between the water molecule and the CO group of AA(+), which is the trigger of the water migration in [AA-(H(2)O)(1)](+).     

Coordination framework hosts consisting of 4-pyridyl-substituted carboxylic acid (PCA) dimers and 1D chains of Ni2+ and SCN-: a rational structural extension toward coordination framework hosts with large rectangular cavities

For the expansion of a rectangular cavity (RC) defined by two isonicotinic acid (isoH) dimers as bridging ligands and two SCN bridges, we conducted a structural extension based on the elongation of the bridging ligands by the replacement of isoH with longer 4-pyridyl-substituted carboxylic acid (PCA). For this purpose, the following three PCAs have been employed: trans-3-(4-pyridyl)propenoic acid (acrylH), 4-(4-pyridyl)benzoic acid (pybenH), and trans-3-(4-(4-pyridyl)phenyl)propenoic acid (pppeH). Self-assembly of Ni2+, SCN-, and each of four PCAs involving isoH, acrylH, pybenH, and pppeH in the presence of an aromatic guest gave four inclusion compounds formulated as [Ni(SCN)2(isoH)2].1/2(benz[a]anthracene) (1), [Ni(SCN)2(acrylH)2].1/2(benz[a]anthracene) (2), [Ni(SCN)2(pybenH)2].(pyrene) (3), and [Ni(SCN)2(pppeH)2](3/)(2).(benz[a]anthracene) (4). X-ray crystal structural determination of 1-4 revealed that the proposed structural extension was successful. Their crystal structures are layered structures of two-dimensional (2D) grid-type coordination frameworks (2D host layers) framed with bridging ligands of the corresponding PCA dimers and 1D chains consisting of Ni2+ ions and mu(1,3)-SCN- ions. The lengths of the PCA dimers are 12.269(5) A (isoH dimer), 16.890(4) A (acrylH dimer), 20.89(2) A (pybenH dimer), 25.387(3) A (pppeH dimer A), and 25.527(4) A (pppeH dimer B). Each 2D host layer has RCs defined by the two corresponding PCA dimers and the two SCN bridges. The dimensions of RCs are expanded in proportion to the increase in the lengths of the PCA dimers: 29.52 x 5.60-7.20 A2 (4) > 24.95 x 5.46-7.38 A2 (3) > 20.88 x 5.49-7.25 A2 (2) > 16.41 x 5.53-7.43 A2 (1). These expansions reflect the number of aromatic guests that can be included in RCs. RC of 1 include only one molecule of benz[a]anthracene, whereas RCs of 3 or 4 includes two molecules of pyrene or benz[a]anthracene, respectively. Comparison of the lengths between the PCA dimers and 4,4'-bipyridine-type ligands demonstrated that a design strategy-the preparation of a bridging ligand through self-assembly of two PCAs-is both efficient and particularly suitable for the preparation of very long bridging ligands.