纳米级MoO3微粉的制备与性质

以(NH4)6Mo7O24·4H2O和HAc为原料,制备了纳米级MoO3微粉,用电镜观察其形貌和粒径的大小,并进行X射线衍射分析.在制备过程中,通过严格控制溶液的浓度、酸度等条件,首先得到纤维状的酸式仲钼酸铵(NH4)4H2Mo7O24·4H2O和 (NH4)3H3Mo7O24·4H2O.并通过加热使其分解,从而获得纳米级MoO3微粉.     

Shape-controlled synthesis of copper colloids with a simple chemical route

The new electrical and optical properties of nanomaterials depend sensitively on both size and shape, which are of both fundamental and technological interest. This paper introduces a simple chemical method to produce copper particles, which has the ability to shape the particle without using any capping agent or template. In our synthetic procedure, the reactant concentration and temperature exerted a strong influence on the shape of the copper particles. At low reactant concentrations, the particles were cubic; at high reactant concentrations, obtained particles were spherical. The number of hollow particles greatly increased when the synthesis was performed at low temperature. We also synthesized a copper cubic ring at lower temperature, and it has been rarely reported. The absorption spectrum of hollow particles showed obvious red shifts, which suggests the possible assembly of novel optical materials.     

A time dependent density functional theory study of alpha-84 phycocyanobilin chromophore in C-phycocyanin

The optical characteristics of absorption and circular dichroism (CD) spectroscopy of an alpha-subunit of C-phycocyanin (C-PC) were investigated by using time dependent density functional theory (TDDFT) combined with the polarizable continuum model (PCM). When the protonation of alpha-84 phycocyanobilin (PCB) and its interaction with the protein moiety in C-PC have been taken into account, satisfactory assignment of the absorption and CD spectra of alpha-84 PCB can be achieved. The TDDFT-PCM calculations conclude that in the visible absorption region the main peak arises from the pi electron excitation of the pyrrole rings and the shoulder peak comes from the charge transfer from Asp87 (a nearby amino acid residue) to PCBH(+).     

巯基化合物的电位分析法研究

本文对用直接电位法测试巯基化合物的可行性进行了研究。发现由硫化银，硫化汞等金属难溶盐制成的膜电极对６－巯基嘌呤，高胱氨酸，１，４－二巯基苏糖经合物可产生响应，其斜率为３０－１１０ｍＶ／ｐＣ，电极响应时间，则为十几秒至十几分钏，测试结果具有较好的重现性。因此，该方法可望得到应用。文中还对有关响应机理进行了探讨。     

Extraction of environmental information from large aerosol data sets through combined application of cluster and factor analyses

To reveal useful environmental information which is contained in large analytical data sets, an approach, based on the successive application of hierarchical cluster analysis and factor analysis, is proposed. Estimation criteria to determine the most suitable number of clusters and/or factors, are discussed and the interpretation of the cluster and factor analyses results is performed using visual techniques. The data sets were obtained by scanning electron microscope-energy-dispersive X-ray analysis of individual North Sea aerosol particles.     

Determination of binding sites in carboplatin-bound cytochrome c using electrospray ionization mass spectrometry and tandem mass spectrometry

Interaction of carboplatin with cytochrome c (Cyt. c) has been investigated by electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (MS/MS). ESI-MS studies revealed that the ring-opened adducts of carboplatin with Cyt. c were formed in the stoichiometric ratio of 1:1 and 2:1 at pH 5.0 and 37 degrees C and in the stoichiometric ratio of 1:1 only at pH 7.0 and 37 degrees C. It was also found that Cyt. c could be cleaved by carboplatin at pH 2.5 and 50 degrees C. The cleaved fragments of Cyt. c were determined by ESI-MS and MS/MS analysis to be Glu66 approximately Met80, Ac-Gly01 approximately Met65, Glu66 approximately Glu104, Ac-Gly01 approximately Met80 and Ile81 approximately Glu104. The carboplatin prefers to anchor to Met65 first, then to Met80. To further confirm the binding site of Met, AcMet-Gly was used as the model molecule to investigate its interaction with carboplatin and its hydrolysis reaction. On the basis of species detected during the reaction monitored by ESI-MS, a possible pathway of the cleavage reaction was proposed.     

用ICP研究鹿科动物骨质疏松症的微量元素特征

鹿科动物的骨质疏松症是近几年出现的一种疾病，它影响鹿的生长发育和繁殖，病重者死亡。我们采集梅花鹿和白唇鹿的毛，血样，用低温灰化方法和温法消解处理样品，用ＩＣＰ分析了毛，血清中微量元素的含量。病梅花鹿毛样中Ｍｇ，Ａｌ，Ｃａ，Ｔｉ，Ｆｅ，Ｃｕ，Ｚｎ的含量比正常组高，Ｔｉ，Ｃｕ，Ｚｎ的偏差率大于１５％，而Ｓｉ，Ｍｎ，Ｐ，Ｐ，Ａｇ，Ｂａ，Ｌａ，Ｃｅ，Ｐｂ比正常组低，Ｖ，Ａｇ，Ｂａ，Ｌａ，Ｃｅ，Ｐｂ存在...     

铬酸引发丙烯腈与苎麻纤维接枝共聚反应

棉、麻类织物通过与乙烯类单体接枝共聚可以提高染色性、皱折回复性、耐磨性、防污性等［‘j．纤维素接枝共聚物的合成始于50年代，目前研究最多的是乙烯类单体通过自由基活性中间体与纤维素进行接技共聚，但此法存在一个突出的问题是在接技共聚的同时生成大量均聚物．铬酸（下文用Cr’“表示）是公认的强氧化剂，据报道［’－‘j，它单独存在时并不能引发乙烯类单体聚合，如果用Cr‘”引发乙烯类单体与纤维素接技共聚，均聚物的生成量将会减少．本文以Cr’”为引发剂，将丙烯睛（AN）与艺麻纤维进行接技共聚，考查不同条件对接技率及均聚…     

Quality through the pharmaceutical chain of care

Many medical professionals are involved in patient care processes. For pharmaceutical care this results in many information transfer moments. To provide optimal care, communication and information the transfer should be conducted in a timely manner, fully transparent, complete and relevant. The TRANSFORM project is directed towards the development of a reference information model of the pharmaceutical care chain with the aim to improve the availability (time, place, completeness) and access of pharmaceutical information regarding patients, thereby resulting in continuity and quality of pharmaceutical care, reduction in medical errors and improvement in patient safety through the design of a safer healthcare system. TRANSFORM leads to improved insight into the processes and data transfer points in the pharmaceutical chain of care. Focussed on laboratory medicine and pharmacy, the implementation of the integration of laboratory test and pharmacy information may result in major improvements in drug therapy monitoring and guidance (i.e. drug impact monitoring). Because of the overwhelming amount of data generated by this integration of drugs, drug effects and laboratory test results, an online decision support system is warranted.Presented at the 9th Conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.The following paper may appear at first sight not to be specifically within the realm of ACQUAL. It has been accepted for publication anyway as it is about reliable handling of data, incl. measurement results, which lead to important decisions (in this case related to a patient). The reliability of handling (a large amount of) measurement results towards a basis for important decisions, is a very important feature of the use of such results.Paul De Bièvre, Editor in Chief     

Impedance study of Ni–Co electro-deposition on Fe powder particles in fluidised bed systems

The electrochemical impedance method was applied during the electrochemical deposition of a binary Ni–Co coating on iron powder in a fluidised bed electrode system. The influence of the suspension density on the charge transfer in the course of the electro-deposition process was studied. At a potential of −900 mV (vs. Ag/AgCl/3 M KCl), when the binary Ni–Co layer was formed, the impedance data were characterised by two semicircles with the semicircle at high frequencies being larger in magnitude. A contribution of the diffusion process to the overall current was observed. The optimal suspension density for the charge transfer in the bed was 10×10⁻³–15×10⁻³ (i.e., 4–6 g of iron powder in 50 ml of electrolyte). The most probable mechanism of the charge transfer for the studied concentrations of powder particles is the convective mechanism. The iron particles dispersed in the electrolyte were considered to act as either a depolariser or an additional working electrode depending on the applied electrode potential and on the suspension density.