The 1,2,4-triazolyl cation: thermolytic and photolytic studies

The generation of the 1,2,4-triazolyl cation (1) has been attempted by the thermolysis and photolysis of 1-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridinium tetrafluoroborate (2) and the thermolysis of 1- and 4-diazonium-1,2,4-triazoles, using mainly mesitylene as the trapping agent. Thermolysis of 2 gave mostly 1,2,4-triazole, together with 3-(1,2,4-triazol-4-yl)-2,4,6-trimethylpyridine, 4-(1,2,4-triazol-4-ylmethyl)-2,6-dimethylpyridine, and 4-(2,4,6-trimethylbenzyl)-2,6-dimethylpyridine. Thermolysis of each of the diazonium salts in the presence of mesitylene again gave mainly triazole together with very low yields of 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene and the corresponding -4-yl isomer in about the same ratio. On the other hand, photolysis of 2 in mesitylene gave mainly 1-(1,2,4-triazol-1-yl)-2,4,6-trimethylbenzene. A photoinduced electron transfer from mesitylene to 2 has been observed and preliminary laser flash photolyses of 2 and the corresponding 2,4,6-triphenylpyridinium salt have been carried out. The observed transients are explained as arising from the first excited states of the pyridinium salts rather than from 1. Ab initio MO calculations are reported and indicate that the predicted electronic ground-state of the triazolyl cation is a triplet state of B1 symmetry with five pi electrons, which corresponds to a diradical cation (1c). Possible mechanisms for the formation of the various products are proposed.     

A spectroscopic study of cobalt(III) furyldioximates

Summary The electronic properties of a series of cobalt(III)trans-furyldioximato-complexes of the type [CoB(FH)₂X] (B=NH₃, X=Cl, Br, I or NO₂; B=pyridine (py) or thiocarbamide (thio), X=Cl or Br; B=imidazole (imid), X=Br), [Co(FH₂)(FH)Cl₂] and [Co(thio)₂(FH)₂]NO₃ were studied by i.r., u.v. and¹H and¹³C n.m.r. spectra The results were compared with those from the corresponding dimethylglyoximato-complexes. It was concluded that -conjugation over the equatorial plane in the furyldioximates is greater than in the dimethylglyoximates. There is some evidence of thetrans-influence of the anionic ligands in the ammines which are in the order NO ₂ ^– >Br^–>Cl^–.     

Electronic detection of the enzymatic degradation of starch

[reaction: see text] The enzymatic degradation of starch can be monitored electronically using single-walled carbon nanotubes (SWNTs) as semiconducting probes in field-effect transistors (FETs). Incubation of these devices in aqueous buffer solutions of amyloglucosidase (AMG) results in the removal of the starch from both the silicon surfaces and the side walls of the SWNTs in the FETs, as evidenced by direct imaging and electronic measurements.     

Das Schwingungsspektrum von Barium-Divanadat

The infrared and laser-Raman spectra of crystalline Ba₂V₂O₇ are reported and discussed by means of a Site Symmetry analysis.

28. Mitt. der Reihe Orthovanadate und verwandte Verbindungen. 27. Mitt.:E. J. Baran undM. E. Escobar, J. Phys. Chem. Solids, im Druck; 26. Mitt.:E. J. Baran, I. L. Botto, J. F. Ramos undP. J. Aymonino, Mh. Chem.109, 1139 (1978); 25. Mitt.:E. J. Baran, J. Mol. Struct.48, 441 (1978); 24. Mitt.:E. J. Baran undI. L. Botto, J. inorg. nucl. Chem.40, 1603, (1978); 23. Mitt.:M. E. Escobar undE. J. Baran, Z. Anorg. allg. Chem.,441, 273 (1978).     

Calculations on the octupolar molecules with enhanced two-photon absorption cross sections based on the Zn (II) and Cu (I) as centers

The equilibrium geometries, electronic structures, as well as one- and two-photon absorption cross sections of a series of octupolar chromophores with Zn(2+) or Cu(+) as coordinate centers and 4,4'-bis(dibutylaminostyryl)-[2,2']-bis(bipyridyl) as ligands have been determined by using B3LYP/6-31G and ZINDO methods. These molecules are designed by controlled combination of two or three bipyridyl ligands with the metal centers. The results show that Zn(2+) is an effective template for the design of octupolar structures which enable it to form tetrahedral and octahedral coordinated complexes; while Cu(+) only exists in a tetrahedral coordinated complex, comparing the tetrahedral complex with Zn(2+) as the center with that of Cu(+) as the center, it is found that the complex with the Cu(+) center is a better two-photon absorption material than the former as far as the transparency/nonlinearity is concerned. Furthermore, for the same metal center of Zn(2+), both one- and two-photon absorptions of the tetrahedral complex are redshifted relative to those of the octahedral complex, is attributed to the spiroconjugation effect in the tetrahedral complex. Our theoretical findings are consistent with recent experimental observations and provide an important foundation for the design of improved transparency-nonlinearity two-photon absorption materials.     

Note on the effectiveness factor of a first order reaction

Upper and lower bounds for the effectiveness factor are derived, whereu is the solution of u=c ² u in,u=1 on .

---

Zusammenfassung Es werden obere und untere Schranken hergeleitet für den Diffusionsfaktor , wobeiu die Lösung ist von u=c ² u in,u=1 auf .

---

---

This research was done while the author was visiting Cornell University, Ithaca, New York.     

Can TMS and DSS be used as NMR references for cyclodextrin species in aqueous solution?

Tetramethylsilane (TMS) can be included by -cyclodextrin (-CD), and sodium 2,2-dimethylsilapentane-5-sulphonate (DSS) can form inclusion complexes with - and -CD. The NMR chemical shifts are changed considerably as a result of the strong interaction between CD and the guest compound in the inclusion complexes. A downfield shift of as much as 0.63 ppm shift downfield has been observed for the protons of external TMS in CD aqueous solution. In view of this, the question arises of whether TMS and DSS can be used as internal references. DSS in D₂O is suggested as an external reference for aqueous cyclodextrin solution in NMR measurements.     

STUDY ON THE SYNTHESIS AND PROPERTIES OF MACRORETICULAR IPN POLYACRYLAMIDE—POLY(VINYL—ETHYLENEDIAMINE)CHELATE SORBENTS

A new series of MR-IPN polyacrylamide—poly(vinyl-ethylenediamine)chelatesorbents were prepared by the reaction of ethylenediamine with MR-IPN matrixes.The newchelate sorbent showed good sorption properties for auric and platinic ions.     

Synthesis and characterization of Ru2(DMBA)4X2 (X = CN, N3, N(CN)2, I): controlling structural, redox, and magnetic properties with axial ligands

Metathesis reactions between Ru(2)(DMBA)(4)Cl(2) (DMBA = N,N'-dimethylbenzamidinate) and MX (M = Na and K) yielded bis-adduct derivatives Ru(2)(DMBA)(4)X(2) (X = CN (1), N(3) (2), N(CN)(2) (3)). Metathesis reactions between Ru(2)(DMBA)(4)(NO(3))(2) and KI resulted in Ru(2)(DMBA)(4)I(2) (4). Compound 1 is diamagnetic, while compounds 2-4 are paramagnetic (S = 1). Both compounds 1 and 2 undergo two reversible one-electron processes, an oxidation and a reduction, while compound 3 features a quasireversible reduction. Single-crystal X-ray diffraction studies revealed that the Ru-Ru bond lengths are 2.4508(9), 2.3166(7), 2.304[1], and 2.328(1) A for compounds 1-4, respectively. Structural and electrochemical data clearly indicate that the axial ligands impart a significant influence on the electronic structures of diruthenium species.     

Analysis of cyanobacterial toxins (anatoxin-a, cylindrospermopsin, microcystin-LR) by capillary electrophoresis

Capillary zone electrophoresis (CZE) and micellar electrokinetic chromatography (MEKC) were applied to the simultaneous separation of cyanobacterial toxins (anatoxin-a, microcystin-LR, cylindrospermopsin). The analytical performance data of both methods, optimized for the three toxins, were similar with a precision of migration times smaller than 0.8 RSD% and a detection limit in the range of 1-4 microg/mL, using spectrophotometric detection at 230 nm. Both methods were applied to an analysis of cyanotoxins in water bloom samples and crude cyanobacterial extracts. The results obtained indicate that, for complex matrices, the sequential application of CZE and MEKC is necessary. It is recommended to use both CE techniques for the analysis of the same sample in order to confirm the results by an orthogonal approach.